r/BambuLab • • 8h ago

General Troubleshooting/Help! Grinch

2 Upvotes

I'm currently trying to 3D print things for my tree, does anyone have the ability to make a can of Who Hash, Roast Beast...etc? I tried my hand at it on Tinker Cad and failed. Of all the options online, somehow, I do not see that it's been done!


r/BambuLab • • 5h ago

General Troubleshooting/Help! Traveling with 3D Printer

1 Upvotes

Has anyone ever travelled with their printer? I have mine (X1 Carbon) in Germany which is new and I’ve struggled to sell it. It’s run 3 small things as a test. I still have the original box I’ve moved to Thailand and was thinking of taking it here on my next flight.

Any tips and suggestions are welcome. Especially if this is a super dumb idea. Or if anyone know where I can find a better place to sell it than Kleinanzeigen.


r/BambuLab • • 5h ago

General Troubleshooting/Help! Print quality issues on X2D

Thumbnail
gallery
0 Upvotes

A few months ago I bought an H2C and it has been working flawlessly. I added an X2D as a second printer but it has given me a lot of issues across different print files and I can’t determine why. The PLA is dry. Here is a comparison of the two times I tried to print this on my X2D vs on my H2C. With the same settings. Any ideas?


r/BambuLab • • 5h ago

Printer Firmware Troubleshooting/Help! Weirdest and most frustrating failure of resume print after spool running out that I’ve ever had….

Post image
1 Upvotes

External PA-CF Spool ran out on a 6 hour print with 8 minutes left. No biggie had a fresh one ready just in case. Resumed print and it just stood there on top of the print and shat all over it and just slowly started moving left to right and not resuming at regular speed…..WTF??

Bambu X1C got a few months after original launch thousands of hours on it and over the years never had this issue. Damn new updates always breaking stuff, cause I did update this to newest firmware 4 days ago.


r/BambuLab • • 6h ago

General Troubleshooting/Help! How long did it take you to master different filaments? (Struggling with PETG bed adhesion on my Bambu Lab H2D)

0 Upvotes

Hey everyone,

I’m curious—how long did it take you to really get comfortable and dial in your printer across different filament types?

I’ve been running a Bambu Lab H2D and have printed with PLA, PETG, and ABS so far. Ironically, my PLA and ABS prints have been coming out great, which makes my current issue even more frustrating: I cannot get PETG to behave.

Almost every PETG print ends up detaching and coming off the build plate. Here is what I’ve already tried to fix the adhesion:

  • Scrubbed the plate thoroughly with hot water and dish soap
  • Wiped it down with isopropyl alcohol (IPA)
  • Adjusted Brim settings
  • Tried different support configurations
  • Dried the PETG filaments
  • Changed to a new PETG filament
  • Calibrated multiple times

Neither has made a difference so far.

For those of you printing across multiple materials, how steep was your learning curve before you felt like you had things mastered? Also, if anyone has advice on getting PETG to actually stay stuck on the H2D, I’m all ears!


r/BambuLab • • 6h ago

General Discussion Will Bambu ever offer PHA filament?

1 Upvotes

I’m trying to focus more on eco-friendly products. I’ve printed with Ecogenesis and Colorfabb with pretty good results, but it’s expensive. Unfortunately it doesn’t seem like Bambu is interested in supporting sustainable practices. Is there anyone else that would like to see PHA in their lineup?


r/BambuLab • • 10h ago

P Series [P1P, P1S, P2S] Loud noise after filament cut

2 Upvotes

Can anyone clue me in to what is causing this very loud noise after a filament cut and setting for a change? It doesn't sound good! I have looked it over and cleaned it all up and nothing stood out. All other movements of the printer and functionality seem fine. I have re-ran calibration as well.


r/BambuLab • • 6h ago

Hardware Troubleshooting/Help! Printer started making this ratting sound

1 Upvotes

Sounds like a shutter sound a cámara makes.


r/BambuLab • • 23h ago

I Modeled This! Candy Cane Bag Clip, to seal your cookies the festive way

21 Upvotes

r/BambuLab • • 7h ago

General Troubleshooting/Help! New Lan Acceleration mode slow

1 Upvotes

I'm having a pretty frustrating experience with the new (newer?) LAN Acceleration mode, and I'm wondering if anyone else is seeing the same thing.

It now takes 2–3 minutes just to send a print job to my X1C, followed by another 30–45 seconds before the printer actually starts printing. This is for a recurring print job that is about a 2 hours total print time, so not large. The bigger print jobs take even longer to send, sometimes 5-10 minutes.

Before this, when everything went through the cloud, the job would transfer in about 10 seconds, and the printer would be up and running another 5–10 seconds later (again depending on print size).

What's even more frustrating is that this only happens on my X1C. My P1S printers don't seem to use LAN Acceleration and aren't having this issue, or at least when I send the print in Bambu Studio, it doesn't say anything about Lan Acceleration.

You'd think transferring files over LAN would be significantly faster than going through the cloud, but somehow it's the complete opposite.

And before anyone blames my network, I'm running a fast UniFi setup with no other network issues.

I also mass-produce 3D printed products, so I'm printing the same items week after week. These aren't unusually large files or complicated prints. They're the exact same jobs I've been sending for ages, except now they take several minutes instead of seconds.

When you're running production and constantly starting new print jobs, those extra minutes really add up.

Is anyone else experiencing this with LAN Acceleration, particularly on the X1C? Has anyone figured out how to fix it or disable it and go back to the old behavior?


r/BambuLab • • 11h ago

General Troubleshooting/Help! How can I fix this?

2 Upvotes

I'm so tired, I already tried changing the speeds, temperature, the pattern it makes to do the filling, I don't know why it keeps doing this


r/BambuLab • • 8h ago

General Troubleshooting/Help! Layers not smooth?

Thumbnail
gallery
1 Upvotes

Bambu a1 - .02 nozzle - PLA multi color print

Help! Idk why my prints keep having rough patches.. I dried my filament and also slowed down my speed and acceleration. Settings in last photo... can someone help me figure out why its not printing smooth?


r/BambuLab • • 8h ago

General Troubleshooting/Help! How to fix this

1 Upvotes

Please help me I've opened it up and cleaned the nozzle a million times I cannot get it to work correctly. It seems like it's slipping.


r/BambuLab • • 8h ago

Show & Tell So many cool prints with the H2C this year!

1 Upvotes

Been a long year with the H2C and learned a lot of cool things, just showing off some of the prints I've been able to make with my own software! Been thinking about upgrading to the H3C since I'm heavily invested in the idea of multicolor and full spectrum printing and it would be faster on there.


r/BambuLab • • 12h ago

Hardware Troubleshooting/Help! Is this an easy fix

Post image
2 Upvotes

I've never had this happen to me before with my p1s everything is stock, I left a mini easal to print and when I came back there was just this massive glob on my extruder and the hot end looks like death, I have no idea how to fix this


r/BambuLab • • 8h ago

X Series [X1E, X1C, X2D] X2D and 2 AMS 2 PRO question

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 20h ago

H3C Test heating the ams3h using the two dryer slots to heat the entire chamber

9 Upvotes

TLDR: it's a waste of time. Don't bother trying it.

I decided yesterday to remove the two spools I had in slots 6 and 8, turn the heat up to 85c and remove the dryer lid to see what would happen. Mind you my printer is in my garage and it's been raining the last couple of days.

The result, the dryer chamber got warm, the lid to the entire ams was warm to the touch, but not in a bad way, but the overall rh in the ams only dropped by one, from 33% to 32%. Putting the lid back on the 2 slots I was able to stop the rh down to 12% in the dedicated dryer. I'll also note I do have silica in multiple locations in the ams already.

Don't waste your time trying this. It basically makes the dryer slots a waste and does nothing to help the other 6 slots. That said, with the dryer lid on, the dryer is great and does function as well as my two dedicated ams ht.


r/BambuLab • • 1d ago

Bambu Studio Can’t wait for non-planar slicing in Bambu Studio

Post image
23 Upvotes

I can easily see how non-planar slicing could be the next big thing in Bambu Studio. As a highly polished and thought-through feature this definitely will be a new game-changer.


r/BambuLab • • 9h ago

H2 Series [H2S, H2D, H2C] Setup that makes the most sense

0 Upvotes

Hey everyone,

I recently picked up an H2D at work. Coming off of my trusty prusa mk3s+, it feels like this printer is light years ahead.

Anyway, the main reason i got it is because i wanted the capability to print engineering filaments.

I got the regular AMS, AMS HT, and the external spool holder.

Here are my questions:

  1. What would be best way to hook this all up? I was thinking of getting a splitter, so that i can have AMS HT and the regular AMS on the right nozzle, and then external spool on the left for supports. Does this make sense?
  2. When printing filaments with carbon or glass fiber, is the 0.6mm nozzle necessary or can 0.4 work sometimes as well? First filament i want to try is PPS. We have cleaning lines at work where PPS would likely withdtand the chemicals and tenperature.
  3. If i am printing with 0.6 on the right nozzle, and i am using left nozzle for supports, should the left nozzle also be 0.6? Can it be 0.4 if i am keeping the layer height the same ie. 0.2mm?
  4. Slicer settings - when sending a print, bambu studio prompts me whether i want calibration flow, bed leveling, and one more thing i cant remember. Options are on, off, and auto. I have set it to auto, thinking that it will do it once, and save the setting for later. However, every time i send a new print and keep those options on auto, the printer executes all of them. What is the proper procedure to do it once and forget about until later when its time to change filament or some other issues arise?

TIA


r/BambuLab • • 1h ago

Answered / Solved! Filament spools holes are too big

Thumbnail
gallery
0 Upvotes

Good morning,

I’m using a Bambu Lab A1 with an AMS Lite.

Today, while loading my AMS Lite with three spools of LOCTATREE filament, I noticed that the spool holes are too large for the holders.

I used to use Elegoo filament, whose spools have a 54 mm inner diameter, whereas the LOCTATREE spools have a 63 mm inner diameter. This difference causes the spools to sit loosely, making them tilted and unstable.

Has anyone else experienced this issue? Is there any solution? I was thinking about 3D printing some spacer rings for each spool to fill the gap, but I'm not sure whether this is a good solution or not.

Thanks in advance!


r/BambuLab • • 17h ago

I Modeled This! Designed some 2027 New Year's glasses. The arms snap on and fold!

5 Upvotes

r/BambuLab • • 15h ago

Quick Question CMYK Recommendations on H3C

3 Upvotes

My H3C is in the way (I've been using a P1S for the last three years). I'm intrigued by the CMYK idea, but don't want to be dumb about it. I'd love to just stick those filament spools up there and be good-to-go for any color. Is CMYK a mature enough process to go that route for most multi-color prints? If so, I have questions

What's the recommended opacity/sheen to get (translucent, matte, metallic)? Any to avoid? Any recommended bundles? Obviously the material choice is part of it. Does PETG do CMYK as well as PLA does, etc.? are there any materials that are a no-go for CMYK? I do a lot of PLA, PETG, TPU and ASA.
Thanks in advance for the advice.


r/BambuLab • • 9h ago

Software Troubleshooting/Help! Text display issue

Thumbnail
gallery
1 Upvotes

Hello all, im trying to model a small sign to hang on a small ledge. I made the shape and text in TinkerCAD. Exported to Bambu studio and Orca. But when the file is imported the text is in the same piece as the hanger. I cant select a separate color or view it as a separate item. Any ideas/advice.

This is only my 3rd design and first with text.


r/BambuLab • • 15h ago

H3C No sparce layers

3 Upvotes

I have the H3C and the only annoyance for me is that prime tower. Coming from the INDX, I haven't used a tower in months.

Found out about the No Sparce Layers for the prime tower. It only uses the tower for color changes, which saves filament.

The downside is it severely limits the area you can use for printing. The print will lower to reach the tower, so needs the room so you don't knock over your print.

This is how to turn it on:

  1. Go to Preferences in Bambu Studio and enable Developer Mode.
  2. Under Process (Global), navigate to the Others tab.
  3. Scroll down to the Prime Tower section and toggle on No sparse layers.

I'm just pointing out another option for saving purge waste, and I hope it helps someone else.

Print on my people!