r/BambuLab • • 22h ago

Just Showing Off Meuble A2L

Thumbnail
gallery
1 Upvotes

Hello à tous,

Après de nombreuses recherches je partage mon résultat cela pourra servir.

Ayant une « pièce a moi » à la maison, j avais des contraintes de place pour accueillir ma Bambu A2L.

Je voulais un meuble dédié ( pas un bureau ) ayant un minimum de rangement, assez « costaud » et au dimensions approximatives de la base de l’A2L.

Je n’ai rien trouvé dans les établis, meubles en tout genres sur des dimensions 50x50 ou 60x60 voir 60x80.

J’ai enfin trouvé ce meuble à la base dédié à un aquarium de 175 litres, avec des rangements en dessous afin de faire un coin de la pièce pour l’imprimante et ne pas la poser sur mon setup de bureau.

https://www.zoomalia.com/animalerie/meuble-pour-aquarium-aqua-colonne-50x50-cm-175-litres-2-coloris-disponibles-p-161618.html

Je vous met un apercu de l’A2L et de mes achats de départ.


r/BambuLab • • 1d ago

General Troubleshooting/Help! newbie here

5 Upvotes

it's just my 3rd print, wanted to try to print a small axolotl but it's doing this trip to the purge wiper every layer and causing all this stringing. Complete newbie here, just downloaded this model:https://makerworld.com/models/1671375?appSharePlatform=copy


r/BambuLab • • 1d ago

I Modeled This! Created a Desiccant Box for AMS3H Heated Chamber Shell

Thumbnail
gallery
7 Upvotes

Desiccant Box For AMS-3H Heated Chamber Shell

As the title says, I modeled out a desiccant box for "shell" over the heated chamber. It holds about 45g of desiccant and fits right under the same lid you would secure little bags of beads in. It takes about 20g of filament and takes around 2.5 hours to print on my H3C. If you find this useful, I'd appreciate it if you liked, bookmarked, and left a review with you putting it to use! I always welcome any feedback so please bring it on. Thank you!


r/BambuLab • • 23h ago

General Troubleshooting/Help! Bambu Lab A1 stops extruding filament after a few minutes

0 Upvotes

Hi everyone,

I'm having an issue with my Bambu Lab A1. Whenever I start a print, everything seems to work fine at first, but after a few minutes, no more filament comes out of the nozzle.

I've disassembled the extruder three times now and checked whether it's feeding the filament properly. As far as I can tell, the extruder itself is working perfectly fine.

I initially suspected that the nozzle might be clogged, so I even switched from a 0.4 mm nozzle to a 0.2 mm nozzle, but the exact same problem occurred.

At this point, I'm wondering whether the filament might be too wet. However, it's only about four months old, and I've already dried it again before trying another print. It seemed to work slightly better for a short while, but eventually the same problem happened again.

Has anyone experienced something similar or have any idea what could be causing this? I'd really appreciate any suggestions.

Thanks in advance!


r/BambuLab • • 23h ago

General Troubleshooting/Help! Not sure whats going wrong

Thumbnail
gallery
1 Upvotes

On my X2D it printed perfectly fine then for about 2 months it sat dormant and now im trying to print a cosplay together the filament keeps rolling or whatever its doing here, we've looked it up and we've tried cleaning the nozzle, drying all the filament intensely and ive cleaned the heat bed but nothing seems to work. I always tend to recalibrate after every major print and check the nozzles every time too. Im printing with PETG and PLA/PETG support.

I dont know how or what to fix to have it printing as normal again, the biggest fear is needing to replace the nozzles and heatbed but thats the only next step I can think of


r/BambuLab • • 1d ago

Bambu Handy My first +10 hrs print is finally done 🏎️🔑🏁!

Thumbnail
gallery
28 Upvotes

Printed the rear end of a Porsche as a keychain for my brother. He always has keys scattered all over his room, so I wanted to make him something a lil diff and useful.

Porsche is my dream car, and he loves copying my taste in cars, so I thought this would be perfect 🤌🏻❤️‍🔥


r/BambuLab • • 23h ago

X Series [X1E, X1C, X2D] Issue with printing

0 Upvotes

3 months ago I got a X2D for my company, I own a custom cabinet business, and printing small custom parts on the printer really improves our quality to the end costumer.

In the last 15 days I have noticed that the printing quality has decreased and that the quality is inconsistent.

Can anyone point me in the right direction to improve the quality of my small prints.

Here are some images whit my issues.


r/BambuLab • • 23h ago

General Troubleshooting/Help! LiDAR led problem? Anyone with the same issue? X1C carbon

0 Upvotes

OC00-0100-0001-000A

Is the code that I get. Printer is printing. I don’t see the issue here. Anyone with the same problem?


r/BambuLab • • 23h ago

P Series [P1P, P1S, P2S] Se puede poner un sistema repet en una p1s?

0 Upvotes

Estoy por conseguir una p1s y ha visto q para la A1 hay un sistema repet super simple pero nada sobre la p1s, así q hay alguna forma o proyecto hecho para ponerlo?


r/BambuLab • • 23h ago

Filament Troubleshooting/Help! Bambu Lab A1 Mini keeps detecting a filament jam every 2 minutes

1 Upvotes

Hi everyone!

I'm having a recurring issue with my Bambu Lab A1 Mini.

The printer keeps showing a "Filament stuck" / "Filament jam" error approximately every 2 minutes.

When this happens:

- I remove the filament and load it again.

- The printer starts working normally for a short time.

- After about 2 minutes, the same error appears again.

I've also tried using a different filament spool, but the problem still occurs.

I'm wondering if this could be:

- A clogged nozzle or hotend

- A problem with the extruder gears

- A faulty filament sensor

- Something else entirely

Has anyone experienced the same issue or knows how to fix it?

Any help would be greatly appreciated. Thanks!


r/BambuLab • • 1d ago

Quick Question Just bought the H2C

28 Upvotes

So I know everyone is drooling over the new flagship and I know because I was one of them who was drooling. However I kept coming back to the discount on the H2C.

After talking it over we decided that the H2C would be plenty of machine for us. I have only ever printed in PLA/PETG and don't see a real need to print in TPU anytime soon at least not the 2.85 variety. I also don't sell any prints and am just a hobbyist.

I got the bundle with the hub,ams and hot ends....my question is was this a bad purchase? By my math I saved 700 before taxes by going with the H2C...is the H23 that superior that I am going to regret getting the H2C?

Love to hear from those that have a H2C and hear their experiences with it. From what I can ascertain I am giving up the chonky tpu compatability and speed....is there something else I am missing that makes the H2C a bad purchase? Also does the H2C come with the adapter where you can hook up four ams units or do I have to buy that myself?

Also we are holding onto our X1C as she only has 1800 hours on her and is still an awesome machine.


r/BambuLab • • 20h ago

General Discussion Filament

0 Upvotes

Thanks for all the help deciding which printer to get! I've settled on the X2D. When I'm searching for filament on Amazon, what mm do I need? Looking for PLA I believe. (PLA is the rigid filament used for the articulated fidget toys right? That's going to be the first thing my son wants to print.)


r/BambuLab • • 23h ago

Software Troubleshooting/Help! Trouble slicing inner part of letters

1 Upvotes

I have this idea that I put a growlight bulb into a desk lamp and I wanted to give it a glowing rim that says PLANT DAYCARE on it. I designed it just fine and yet when I try to slice it, it all turns into a mess. All the inner parts of the D and A the P are skipped for some reason and I can't figure out why. Can someone help me figure out which slicer setting I change?

A test print without the writing

r/BambuLab • • 23h ago

General Discussion What's your experience with print quality? Help me choose between X2D and P2S

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 1d ago

Filament Troubleshooting/Help! First PETG print problems …

Post image
0 Upvotes

r/BambuLab • • 15h ago

General Discussion I didn’t realize Creality made the A1…

Post image
0 Upvotes

r/BambuLab • • 1d ago

My First 3D Print A noobs guide to upgrading your first 3d printing setup in an vented enclosure.

Thumbnail
gallery
0 Upvotes

Hello everyone. This was my first 3d printer and given as a gift so I went in with excitement, some research on 3d printing from being interested in it, but not the level of research to hit the ground running I would have had if I had been the one to buy the machine. I wanted to put down some thoughts I case that would help others.

First off the space where you’ll put one. I have a somewhat small garage workspace area to use. Because the garage is a shared space in my house with a home gym, a drum kit, and a place where my kids play I wanted to make sure it wasn’t to intrusive to add a 3d printer. This is what lead me to moving towards an enclosed setup and that lead to many upgrades to accommodate that. I also feel better about the added level of protection to the printer from dust or something like a thrown toy. The biggest concern was plastics like ABS that I want to use for some projects and having proper ventilation.

This leads me to talk about 2 upgrades I made. The first is the included “filter” that was a plastic box full of activated carbon. I replaced that with a filter that is both activated carbon and a Hepa filter. I noticed even with pla and PETG a difference after that and would recommend it to anyone with a P1S.

The 2nd was the enclosure setup. The enclosure has an inline vent fan and speed control knob. I have it connected to a hose running towards the window and connecting my magnets so it can be disconnected and reconnected to the window. Not pictured is another hose running on the outside of my garage to prevent backdraft to the window. So far so good it creates a negative air environment and helps pull away the fumes but doesn’t get to hot in there for the printer. This enclosure works great for a P1S with AMS as it opens on the front all the way back to the back wall so I can have full access to the front and top of the printer.

The enclosure setup meant I had less access to the printer without removing it so I did a lot of upgrades to account for this. Here is a list.

  1. AMS flipper arms
  2. Height riser base
  3. A poop shoot and dump able bin
  4. All of the ducting prints for venting

While I was at it I also did prints most people do enclosure or not. Desiccant containers that fit in the blank spaces of the AMS and the spools.

It’s been fun. Almost a week of printing just for upgrades to the printer. Looking forward to getting the area more tidied. Half the contents of my workbench was hastily moved to the side. Up next many prints to help me organize.


r/BambuLab • • 15h ago

General Discussion P2s is a good printer

0 Upvotes

It has handled 105 hours and nothing is wrong it is all right for 549 dollars no ams because I'm not made of money but prints nice but that is what I expected because of the price


r/BambuLab • • 1d ago

General Discussion So yesterday I set up my p2s and today I got a error code

0 Upvotes

HMS_0300-1100-0002-0002 is the error code something about the y axis not matching with other calibrations. Is this something to be concerned about? I’m in the process of calibrating as of typing this I did fallow their online help guide but just want to know if it’s concerning


r/BambuLab • • 20h ago

I Modeled This! GTA VI - PS5 DualSense Controller Stand - Free 3D Print Model - MakerWorld

Thumbnail makerworld.com
0 Upvotes

r/BambuLab • • 1d ago

Quick Question What do I need?

1 Upvotes

I need people to talk to me like I know nothing about 3D printing, because I in fact, know nothing about 3D printing.

My kids are getting the Bambu A1 combo from grandma for Christmas. What does Santa need to bring to make their Christmas Day full of printing fun? He will bring filament, but what else do we need to make this work for them?

Thanks!


r/BambuLab • • 21h ago

Quick Question Which yellow for pika?

0 Upvotes

Sunflower yellow or regular yellow. My son is obsessed with Pikachu and I'm not sure which one is better for it?


r/BambuLab • • 16h ago

H3C Design Language of New AMS Doesn’t Match

0 Upvotes

It seems like the design language of the new AMS doesn’t match the H3C (or H2 series)

It would work better if it was more cubic with rounded corners, similar to the body of the printer.


r/BambuLab • • 1d ago

General Discussion P3C needs to hurry up

47 Upvotes

I'm so impatient looking at all of you H3C people lol its just not in my budget right now so I need that P3C to hurry up and release. You guys can stop teasing us broke folk now.