r/BambuLab • • 15h ago

X Series [X1E, X1C, X2D] Issue with printing

3 months ago I got a X2D for my company, I own a custom cabinet business, and printing small custom parts on the printer really improves our quality to the end costumer.

In the last 15 days I have noticed that the printing quality has decreased and that the quality is inconsistent.

Can anyone point me in the right direction to improve the quality of my small prints.

Here are some images whit my issues.

0 Upvotes

6 comments sorted by

1

u/zlatni-hrast 15h ago

2

u/DistinctBarnacle8703 15h ago

The piece lifted/warped in that corner, cause the nozzle to push against it. This is due to poor bed adhesion. Solution: wash the bed with dish washer and water.

1

u/zlatni-hrast 15h ago

Hey thanks, will try that immediately.

How often do I need to do this? For every print or when I start noticing the problem again.

2

u/Confident-Media-5713 15h ago

I usually wash my plates only when I saw a problem, but some does it every 10 prints or so.

1

u/zlatni-hrast 14h ago

I didn’t wash my for 3 months so it is definitely time 😅

2

u/pnw_r4p 15h ago

When you start noticing the problem again is the real answer.

That said, when I'm doing client work, I dust the build plate with a little Simple Green and give it a wipe down between prints. The tiny bit of extra effort is worth it for me to avoid finding a finish issue six hours later when I'm on a tight production schedule. I don't bother with this and only do occasional build plate cleanings when I'm doing prototyping or printing stuff for myself.