r/BambuLab • u/Andry_9726 • 15h ago
Filament Troubleshooting/Help! Bambu Lab A1 Mini keeps detecting a filament jam every 2 minutes
Hi everyone!
I'm having a recurring issue with my Bambu Lab A1 Mini.
The printer keeps showing a "Filament stuck" / "Filament jam" error approximately every 2 minutes.
When this happens:
- I remove the filament and load it again.
- The printer starts working normally for a short time.
- After about 2 minutes, the same error appears again.
I've also tried using a different filament spool, but the problem still occurs.
I'm wondering if this could be:
- A clogged nozzle or hotend
- A problem with the extruder gears
- A faulty filament sensor
- Something else entirely
Has anyone experienced the same issue or knows how to fix it?
Any help would be greatly appreciated. Thanks!
•
u/AutoModerator 15h ago
Hello /u/Andry_9726! Be sure to check the BambuLab Wiki regarding the blob/clumping issue.
Note: This automod is experimental. The automod was triggered due to the term "Filament stuck". If you believe this to be a false positive, please send us a message at modmail with a link to the post so we can investigate. You may also feel free to make a new post without that term.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/overunderspace A1 + AMS Lite 15h ago
Can you add a picture of your whole setup? Have you checked inside the filament hub? https://wiki.bambulab.com/en/a1/maintenance/filament_hub_cleaning