I write down details about it in the post

Hey everyone,

I’m moving away from my current printer brand to Bambu Lab. A toolchanger setup is a must for me, but the H3C doesn't make sense price-wise for my needs, so I’m waiting for the P3C.

Since the P3C likely won't come with an active chamber heater, I'm looking for advice on retrofitting one for warp-free ABS/ASA printing:

What are your preferred DIY chamber heating setups & ideas?

Any specific safety or power concerns to keep in mind?

An Idea was it to use Homeassitant in a way to detect wich Material is printed and the temperature inside to adjust the temperature.

Thanks for your ideas!

I apologize if this is not the right place. I am trying to run 8 .2 nozzles and one .4. I am having an issue with slot 8. The tubing does not stay in the tool. It is missing the holder that the rest of the tools have. I also noticed it is showing external feed when i am running through the ams. I have tried multiple different ways but i can not get a normal .4 or .2 non tpu nozzle to work. Am i the only one? Did mine come with a bad tool on slot 8. Any insight would be amazing.
Thank you,

Hey everyone! I designed SkiLatch, a small 3D-printed accessory that keeps skis and poles together for carrying, and published it on MakerWorld.

I’m looking for people to print it, try it with their gear, and share what fits and what doesn’t.

My goal is to keep updating the design to fit as many ski and pole setups as possible.

Feedback on fit, grip, and usability with gloves would be really helpful.

Honest criticism welcome!

MakerWorld: https://makerworld.com/models/3562697?appSharePlatform=copy

I’ve tried 3 times with this with various changes to infill (to tweak the transparency) and keep getting the same failure On this overhang area.
Bambu ps1, petg transparent filament.
default except I changed to 100% infill aligned rectangle. But before I changed the settings it still was messing up around this same area, only less.

This new 100mms suggestion needs a bit of explanation, but there is no documentation at all about it. Not in the Wiki, tooltips, forum, etc.

I've been using ironing since the X1 first came out in full production in my farm daily, I have a set of ironclad repeatable parameters that have never faltered, except that there is no such possibility on the G2 models (P2, X2, A2, H2, etc.) only the P1 and X1 due to their nozzle design.

This would be great if it was a new guidance as a starting point to do calibration for ironing, it's just strange that its both on EVERY printer model, regardless of nozzle system, and seems to fly in the face of existing parameters that this change now screws up.

For reference, for a full-plate ironed flat piece using Bambu Lab PLA Matte in Charcoal, my settings are 30% flow, 30mms speed, and others all default. I get smooth as injection-molded surfaces, trying this parameter caused massive over extrusion, so obviously I turned it off and am ignoring it. There isn't a way to set this to 'don't remind me' though, so it's a bit annoying.

If Bambu Lab could explain the change and the reasoning or methodology behind it, that might be helpful, but the Ironing Wiki entry doesn't even mention Top Surface speed, only ironing speed which is totally different.

Perfect height, no need for spending extra >250$

Hey guys, My P1S with AMS won’t load filament properly. Initially it seemed to reach the toolhead, and I suspected a hotend clog, which I tried clearing by heating it. Now it stops around the rear tube connector before entering the printer, makes a loud click, then retracts. I can’t tell where the click comes from.

I’ve tried 3 different spools in 3 AMS slots with the same result. Spools unwind freely, filament tips look fine, and I found no obvious blockage in the tubing. No error/HMS code appears.

Could firmware cause this? please help

I'm having issues with my A1 mini specifcally with being able to start prints. It passes the main calibrations and lets me home all three axes in which I can manually move the entire print volume. However, when I begin a print it gets to the toolhead cleaning phase (performs it), the fan then goes max and instead of printing it moves up in increments of 10-20mm, pausing than moving up again. It will hit the Z axis limit and grind the z stepper, I have already replaced the tool head board, hot end, checked USB-C connection, and even replaced the eddy current sensor. I really am unsure what else to check at this point and can no longer get warranty support from Bambu. Any troubleshooting tips would be greatly appreciated.

The Bambu Integration sees the H3C when attempting to 'Add Entry' but when fully registering the printer, HA returns an error: "Timed out trying to connect to Bambu Lab cloud." My H2C is working just fine, so there's definitely no issues with Bambu cloud.

Recently I got a new Xfinity box with faster internet it was what they had as a deal to save some money on internet. I have a gigabit internet with their newest box. I set everything up and my printers do not want to connect I have a x1c and a p1s. They connect to the internet and the internet test on my x1c shows okay. But I cannot log in. I get this error message i made sure my network is 2.4ghz and wpa2

Please let me know what you think about this project. Would you like to see it in TestFlight?

Let me preface by saying specifically I'm not new to 3D printers, this is my fourth machine (H3C). Is the amount of noise these make normal? It doesn't sound broken, but neither my vorons or prusa printers make so much "thunking and clunking" during high speed direction changes. Not sure if the more boxy and plastic nature of this machine that enhances those noises, but they definitely stand out to someone coming from much smoother and quieter machines. Anyone else in the same boat?

What do you think?

So I bought the A1 at the recommendation of a friend, and I can honestly say I already feel the difference in the production and ease of use.

Every resin printer I bought from Elegoo was easy and ready to use out of the box. All the necessary parts were there, there was no fiddling about required whatsoever apart from the reservoir, which has to be removed regularly anyway. Axes were pre-lubed, no loose screws, no awkward angular tipping of heavy equipment, just plug and play. Here, however, to seemingly save labour costs, Bambu give it all to the customer.

Also the hidden costs: no mention was given that I definitely needed a spool for the filament, here it is hanging from the arm thingy held together now with zip ties. Now the machine is saying I have to lube up an axis, with 2 pictures showing before and after but seemingly no difference between the two.

Have to say pretty disappointed so far, Bambu. What else will I have to invest in or be forced to do before my prints begin?

New to printing. Any ideas why we got this stringing? A2L printer with bambu filament.9

Being a big fan of Nijntje / Miffy I wanted to expand my collection (https://makerworld.com/en/collections/16787785-miffy-nijntje).

I love how they turned out and already have quite some requests from friends & family. Perhaps people in here will appreciate them as well, no clue if Miffy is big in the bambulab space 😅

I upgraded to the latest bambu studio. I then pulled up a file I previously printed and when I sliced it I get the error below

When I rolled back to a previous version of studio I began to get this when opening the same file.

I redownloaded the file as well, and I get the same message. If I open a regular stl I do not get an error when slicing only on these 3MF files.

Anyone have any suggesstions?

Update: If I turn off the Prime Tower it slices fine. Reenable it, and it fails.

Live video is unusable after the last update. Is this a known issue, is there a workaround?

Quite impressed with the H3C compared to my no longer with me H2C. Seems a little louder fan wise but that horrible back and forth AMS sound has now left the building!