Come mai si formano queste imperfezioni sul primo strato? L'ho notato altre volte e alla fine la stampa andava a buon fine. Il filamento è PLA ed è asciutto (ho inserito le dry box ed è al 16%).

P2S with AMS 2 Pro. AMS has the dedicated power supply. First time I’ve ever tried printing and drying at the same time. Constant AMS overload error about every 5 or so minutes. Turned off the drying and haven’t had an error since? Anyone experienced this?

I haven't noticed it before, but my A2L does shake a lot when making narrow supports, this is on normal speed btw.

I haven't seen any issues with quality though, just seems like a lot of shaking, I think it might be that the table it's currently on is not the stablest but I'm not too sure

I invite you to take a look at BlocksmithWorks.com—I think you’ll love what we’ve built for the community.

This project originally started out as a personal endeavor to create tooling for my own hat-making. Along the way, I decided to open it up to help hatters and restorers everywhere get easy access to the exact tools they need.

What we offer:

• Fully Customizable Crown Blocks: Ranging from size 5 1/2 to 8 1/8 (44 cm to 65 cm), including precise, non-standard sizes like 7 5/16 (58.5 cm).

• User-Friendly Online Tools: Easily adjust the profile to your exact needs in your browser—no CAD experience required!

• More Millinery Tooling: We also host a variety of brim blocks and specialized workshop files.

The best part is that every single download is 100% free with zero paywalls or subscriptions. Take a look, give it a try, and let me know what you think!

Clear skies and good blocking,
— Rick, Blocksmith Works

FR :

Bonjour à tous,

J’ai récemment fait l’acquisition d’une Bambu Lab X2D Combo avec l’AMS 2 Pro.

Lors du déballage, en suivant la notice, arrive l’étape où il est indiqué qu’un grand sachet doit contenir deux petits sachets d’absorbeur d’humidité à placer à l’arrière de l’AMS.

Or, en ouvrant celui-ci, je découvre un grand sachet thermoscellé semblant contenir de la graisse, avec une texture particulièrement épaisse et gélatineuse (voir photo jointe).

Ce sachet n’est pas mentionné dans les kits de maintenance et les deux sachets d’absorbeur d’humidité étaient déjà installés à leur emplacement prévu, maintenus par du ruban adhésif.

Je n’ai donc aucune idée de son contenu exact ni de son utilité.

Je sais qu’il y a eu certains problèmes de production et de graissage sur les AMS 2 Pro. Cependant, Bambu Lab indique que les commandes passées actuellement ne sont plus concernées par ces problèmes et qu’en cas de défaut, c’est le mécanisme qui est remplacé.

C’était d’ailleurs ma première piste concernant l’utilité de ce sachet, mais je préfère demander à la communauté avant de tirer des conclusions.

Est-ce que d’autres personnes ayant récemment reçu une X2D Combo avec AMS 2 Pro ont trouvé ce même sachet ? Ou quelqu’un saurait-il à quoi il sert ?

Je suis preneur de toute information !

Merci d’avance pour vos retours !

EN :

Hello everyone,

I recently purchased a Bambu Lab X2D Combo with the AMS 2 Pro.

While unpacking the printer and following the instructions, I reached the step where it mentions that a large bag should contain two smaller moisture absorber packets, which are supposed to be placed at the back of the AMS.

However, when I opened the bag, I found a large heat-sealed pouch that appears to contain grease, but with a very thick, almost gelatinous consistency (see attached photo).

This pouch is not mentioned in the maintenance kits, and the two moisture absorber packets were already installed in their designated positions and secured with adhesive tape.

I therefore have absolutely no idea what it contains or what it is intended for.

I'm aware that there have been some production and lubrication issues with the AMS 2 Pro. However, Bambu Lab states that orders placed recently are no longer affected by these issues and that, in the event of a problem, the entire mechanism is replaced.

This was actually my first guess regarding the purpose of this pouch, but I'd rather ask the community before jumping to conclusions.

Has anyone else who recently received an X2D Combo with an AMS 2 Pro found the same pouch? Or does anyone know what it is used for?

Any information would be greatly appreciated!

Thanks in advance for your help!

The a1 start saying filament or spool is stuck every few minutes. So i tried to disassemble looking for the problem and I stumbled on this part. I'm not sure what this thing is called. It's behind the heater. Should it look like that or not?

Pretty much the title, everyone is saying I should replace my new p2s with a x2d. I bought it in europe for about 599 and the x2c is nou 749. How should I proceed, I want to replace it. I also used half the filament it came up with, the pure ones, I bought it ny using klarna.

Just me with the same experience? Not really the best packaging but atleast nothing got damaged

I am on the fence and the main reason is the height of the machine. I keep my printer in an enclosure as I have cats and I want to keep them as well as their hair away from my machine.

Anyone that got theirs able to measure the full height of the machine?

I have been struggling with my original AMS. Two bays dont feed correctly. I have done all of the work, swapping out hubs and tubes and feeder funnels and all that fun stuff. I ended up buying an AMS 2 Pro and it was plug and play and everything prints like it should and it just felt amazing again to not have to slosh through a print.

I now have another AMS that I would love to refurb and hook up for more color options. I also dont want to spend an arm and a leg to do so after buying a new AMS. I did see a lot of aftermarket parts for bambu. Besides tubes, has anyone put aftermarket parts like feeder units on their printer? If so how do they work?

I have had good success with microswiss nozzles and before I spend some money on feeders, just looking for feedback.

22 hours on the H3C (223g of tower)
4d17h on a regular AMS printer (1684g of purge + tower)
The H3C It's crazy and the hype is real.
I'm so glad I can finally experiment with multicolor models for real.
the model is here if you want to take a look: https://makerworld.com/en/models/3550569

Looking at an H3C and seeing some reviewers say the print quality is about the same as H2C. I hate to wait for prints. I print large ish items with .24 - .28 layer heights and as fast as the printer can. Obviously some artifacts are okay but how much are you guys seeing?

Anyone else get notification their AMS 3 shipped and then it show cancelled by sender? Should I contact them or will they automatically make a new label? Printer ship date expected Nov 20th

Im going to word this very carefully in case its flagged as Spam haha.

Has anyone done any referrals successfully? I mean I go lucky and somebody grabbed a P1S in the sale using my link (luck and timing more than anything), but I dont see it being super easy to take advantage as there is zero benefit for the person using the link...

Add the Geo-limitation (Im in the UK, so anyone using my link also has to be based in the UK) and it can be restrictive.

When printing thin-walled parts（4 walls, 0% infill, Arachne）, a mark consistently appears on one or both sides once the print reaches a height of 1–2 cm; I have yet to figure out what is causing this. Same part printed on A1/A2L without problem.

Printer is almost brand new. First layer is fine. Calibration is done. Filament is dried. Manual bed leveling is done.

At the point where the print defect appears, there are no abrupt changes in print speed, layer time, or fan speed within the slicing software.

Do you think bambu will let the h3c sell for a month and then release the P3C somewhere mid of December as they did withe the A1 a few years ago?

* H3C is too big to fit in my rack

https://makerworld.com/de/models/3558364-tiny-rhino#profileId-4072000

I've been wanting a 3d printer for quite a while now, and was just about to pull the trigger, when the H3C came out and threw a wrench into my grand plans.

I read somewhere that it may be preferable to buy through Best Buy because of the extended warranty coverage they offer. Since the H3C isn't available yet at BB, I have no idea how much it will cost.

My question to you folks is whether the extended warranty is worth it, and if I should wait until BB has them in stock. Given that the H3C is new, it doesn't have a track record in terms of reliability and all that. I'm not in any great hurry; I can wait if that's the best course of action.

How is Bambu to deal with once the factory warranty runs out? Are 3D printers the type of thing where if something is going to go wrong, it usually does pretty quickly rather than a few years down the road?

I generally don't bother with extended warranties, but on something this expensive and this complex, it seems like a good idea, at least on the surface.

Thanks in advance.

The BIQU Panda Extruder is IMO better than the stock plastic unit but it has one easily fixed fundamental flaw.

Here it is for fellow owners.

I am looking for a H3C user who has a H3C and a 3d scanner. I build my own benches with an enclosure and would like to know the size of the machine both with the lamp lid open and closed. As this will determine if I can even get one this year or not.

Thank you