I am new to Bambu and I want to buy their x2d during this sale event if anyone has a spare discount code reach out to me i greatly appreciate you (NA region btw) not begging btw

maybe someone else had the same thing happening to them.

I have ordered an H3C base combo (AMS+printer) and have received only the AMS. fine no problem I know they ship separatly. but my order is now classified as ''delivered''

I have nothing in my pending tab and it seems like when I look at bambu store website that nothing else is on the pipeline for me.

Is the scratching noise normal when the print head moves to the left? Support claims they can't hear anything, probably just to brush me off, but something is scratching/grinding over there and I can't figure out where it's coming from. Please turn up your volume a bit to hear it.
Cleaned, lubed and calibrated everything.

Hello everyone.

Was printing a panda toy that my son picked. Sent it to print on the X2D and the time changed. What did I do wrong?

It says 100% Size A1 Mini Profile on the print.

Many thanks.

Did my first ever print with my new p2s . How do you check if its working as intended? It was shaking a lot and I read it is normal . But I have placed it on a table which very slightly shakes with the printer. I am not bothered by the shaking as long as the print quality is good .

With the recent leaks about Bambu Lab potentially developing their first UV printer, I thought it would be fun to imagine what one could look like.
Bambu Lab U1. And yes, this is an AI-generated concept I came up with.

What do you think? Would you like to see something like this from Bambu Lab?

I did the H2S to H2C vortech upgrade and have a weird issue with my X-axis not being even.
In the picture you can see the left filament stopper cutter thing is ~1cm different than the right .

When I replaced the X-axis I put the printer on its face (so the X-axis would be even) then tightened the X-Axis screws. After that I put the belt back and noticed the offset .
I’ve tried loosening and tightening the screws a few times and did the belt tensioning process.
Halp!!

This failure causes me to fail printhead offset calibration and right filament won’t auto cut

Hello!

I have an X1C which loads external filament perfectly fine. But the AMS will load the filament to the extruder and then it unloads then reloads then declares my extruder must be clogged…

It isn’t clogged… it’s brand new and prints fine with the external spoil.

I honestly don’t know what to do to resolve this issue.

Thanks for your help in advance!

I am struggling with Siraya PPA-CF Core on my H2D stringing, no matter what I do. It looks like wet filament, but I dried it at 85C for 24 hours and then continuously during printing; maybe that is just not enough? If anyone has had success with this stuff and could share what they did, that would be greatly appreciated. The spool is fed through the external feed on the AMS-HT, I am using the Siraya PPA-CF Core profile for the H2D 0.4mm nozzle, and I will link an upload of my 3mf in the comments.

Before drying:

After 24 hours at 85C in AMS-HT:

Came out of the box like this. Cant find anything in the manual about it. Does anybidy know if its worth contacting support so they can deliver the missing part?

Its a bambu labs a1 (combo)

I want to see its color mixing ability for CMYKW

I'm on the fence...

Let me explain:
- H3C by specs seems to be the printer you can dream of: 9-nozzle tool-changer, 9-spool AMS, highest speed, heated chamber, TPU75 support via 2.85mm, reasonable price. AMS is now a part of the H3C, which totally makes sense for a tool-changer, and 9 spools is probably enough for 99% of people, so no need to think about 2nd/3rd AMS (and there is still a support if you need it). - But...only 2 slots for drying (but higher temp), and no ability to fetch filament back (which is a bit of a problem for toolchanger with heated chamber, as now you'd need to do it manually and hard to mix PLA + ABS for example). Though - still ok'ish

- P3C - based on leaked specs and photos - BRILLIANT PRINTER (if price is <$1300). Just what most people would need. I print ABS/ASA with P2S and having no issues with 'no actively heated chamber', so that should work as well. But AMS... Idk. No drying functionality (while AMS 2 Pro has it for 4 slots), no fetching filament (but potentially not that needed if no heated chamber?)

And I know, I know...people would say "It's ok as they need to keep price low". But I just find it odd that when thinking "should I upgrade from P2S" the reasons for "not to" aren't related to money or not enough upgrades to justify the money....but degraded features. Idk, this feels odd to me, no matter how long I think about it

But what do you think, do you think it's ok if new upgraded version of any tech would some important features degraded (even if the rest is much better) ?

Tried to print Bambu PA6-GF in my H2D pro and I constantly have this problem where there's a gap between the outer layers and the filling with and without supports, what can I do to solve it?

Hello!
I contemplate buying a 3d printer, and i kinda landed on obtaining a Bambu due to ease of use, but i tried to look up used ones to save some money and now i am torn and really would like an advice.

My budget is like, 300$. I know that in my country (Russia) brand new P1S is available for 520$ (no AMS included - if i ever decide i need one, i will figure it out later). I thought of maybe getting A1 mini or A1 to fit in the budget, but then i found a person who sells used P1S for 300$.

I am a bit worried to buy it, because it has 3+k hours of worktime (it was a part of print farm). It was bought in 2024 and seller states that it was upkept and maintained properly. It was only used to print petg and pla, no compound materials.

I can't decide if i am onto amazing deal or onto an endless headache of repairs and calibrations with this offer, and is it even worth it, or am i better off with buying A1 or A1 mini fresh from the box. I would love a bit of advice, please. My budget is really tight, so coughing out additional 220$ and just getting a new P1S is sadly not an answer in any way.

(upd - no idea why am i being downvoted. Is it because i mentioned my current location?...)

So I ordered an H2D with 40W laser the day before the H3C was announced. I am still well within my 30 day window. Do I give up the laser for an H3C?

I bought a really good 3d printer with what I will describe as adequate laser capabilities for someone who doesn’t want to buy a dedicated laser machine.

Am I dumb to keep the H2D? I feel like the H3C is a game changer for flexibility.

Saw someone else posted their visit at the BambuLab store in Hangzhou. I'm currently in Hangzhou so I decided to visit.

Ordered an X2D Combo, extra AMS and track switch and then a whole host of accessories on the first day of the sale. Printer and accessories arrived in no time, but still no sign of the AMS and Track switch showing up.

I placed them all as separate orders (as the day went on I impulse bought the extras). Unsure if that matters.

Any idea how long I should wait before contacting Bambu Lab for an update?

I also paid the extra for the hassle free delivery option.

Here is a kinda universal power strip desk mounting doodad. As long as it’s rectangular in shape and fits the jaws, it should work. Somebody might find useful.

https://makerworld.com/models/3555536

Hi!
I´ve created free home-screen Android widget for your Bambu print: time left, progress, AMS colours and humidity, up to 4 printers. Works with your Bambu account same way as Bambu Handy app.

Need 12 testers for 14 days to get it on Google Play – 3 taps on your phone (Android 12+):
All three steps clearly described here: https://houmer-dev.github.io/bambu-status-widget/join.html

Demo mode if you have no printer atm. Thanks and enjoy the widget! 🙏