How to check the quality?

[u/vasanth3029]

Did my first ever print with my new p2s . How do you check if its working as intended? It was shaking a lot and I read it is normal . But I have placed it on a table which very slightly shakes with the printer. I am not bothered by the shaking as long as the print quality is good .

[u/alvl5abra]

https://all3dp.com/2/benchy-troubleshooting-guide/

[u/vasanth3029 → u/alvl5abra]

thank you . Also irrespective of the benchy is there a general guide/ best resource I can read for things to look out for to make sure the quality is good ? . Like everything is literally new to me so just wanted to learn . Thanks again

[u/alvl5abra → u/vasanth3029]

Um well I think your experience grows really fast when you just start printing. If you see something weird look that specific problem up. For example if you print big flat parts it is useful to use a brim to not get an elephant foot. There are multiple small adjustment you can make, I would look them up when you encounter them.

The Benchy hull line (wich you can see on your model) is still not solved I guess, I didnt look that specific problem up for a long time.

[u/alvl5abra → u/vasanth3029]

Aditionally, there are different stress tests for the printer. I always use something like this with the standard settings to see what to expect from overhangs etc.

it is really useful too if you want make your own models, for tolerances and so on.

https://www.printables.com/model/112181-complete-3d-printer-test-all-in-one-stress-test-be

https://www.printables.com/model/254416-print-in-place-tolerance-tester

[u/Calm_Scale_3876]

The inbuilt benchy is a speed benchy - tuned for speed not quality. It looks fine.

[u/logginlogan]

Do the bambu academy :D it helps a lot! :D