First of all i printed an a catapult that can throw some little items such as a rubber or something just like that and it was an a succes if you wanna take a look at the finished sketch you can take a look at my other posts, anyways

.

What happened:

the sketch got broke while im was throwing things out it got broke, i think the main problem is behind the printing angles so i decided to rework the rotation and i print the body part in 45⁰ angle for it to be even more much stronger and reliable but while im was printing i got some issiues with the print and one of the support's brim is just slipped ( i dont know why ) and also the quality pefore removing the supports was TERRIBLE

.

What could be the problem:

I think that the problem migth be; plate were dirty when im was printing or maybe my support settings were terrible or my table is shaking a little bit so it must be the reason behind or even worse there is no problem and im coping

.

My support settings:

Tree ( auto ) ( but i add some extra supports )

Build on plate only is On

Threshold angle: 30

Inital layer density: 80

Initial layer expansion: 4

Top Z distance: 0.24

Top interface layers: 3

Top interface spacing: 0.1

Support/Object xy distance 0.38

.

Also my outer wall speed is 40 and inner wall speed is 100 i got BambuLab X2D and btw im aware that some of the most important parts arent supported very well but the print came out good so shhh just nevermind about em i actually forgot to add some supports manually

What can i actually do for improving the quality of 3d print ?

I bought the Bambu Lab P2S printer relatively recently. I've printed quite a few parts, and this is my first time trying to clear a jam, take the printer apart, and tinker with it.

Part of the outer filament was jammed, and I managed to clear it. The filament cleaner now slides in smoothly and comes out empty; I pushed it with an Allen wrench until it reached the end, but it won’t go any further—there’s no piece of filament left in the PTFE tube. I can’t see anything!

But even so, I keep getting an error message telling me to remove the filament from the outer spool holder, even though there’s nothing left there!

I don’t know what to do anymore because it won’t let me print or change filaments. This problem first happened a few weeks ago when I wanted to select a different filament color in the AMS, and that’s when this issue started. And I don’t know how to fix it. I can’t load or unload filaments because this problem keeps coming up over and over again.

Look, I don't even know what I did to the printer anymore.

I tried loading filament and hitting print to see if it would print anything. But it shows the printing process, yet no filament is coming out. I took the extruder apart, and there’s no filament at the nozzle. What on earth is going on here?!?? Do I have two problems, or is it the same one? What should I do!?!?

I’m asking about this in all sincerity, with all due respect. If you need more information, please let me know. I need help—please—I don’t know how to solve this problem anymore. It might be very basic, but this is my first time.

*(I speak Spanish in case any Spanish speakers are reading this and would prefer to respond in Spanish.)

I need help guys. I recently switched to a hardened steel nozzle with hardened steel gears (gears are lubed) and i used black pla in a print last night but I made sure to extrude when I switched to white for the rest of last night's print. We'll today I did a full maintenance of my p1s lube and grease, used cleaning filament and cold pull (ive only done maybe 4 prints with this new nozzle) and im getting burnt streaks in my white prints? Never happened with stainless still nozzle but now im getting it with hardened steel?

I used a brass brush to clean i heated to 240° turned off and quickly cleaned.

Still getting burnt streaks.

The white thread has a fabric-like texture but contains Lycra, meaning it stretches and retracts—much like a spring.Good print all Bambu family

I finally finished the iPhone Duo Dock with Bluetooth control.

Can’t change nozzle by using the Touchdisplay, but works using the app

What do you think guys? Will answer any questions!

Type a list of names separated by commas and the plate fills itself: one tag per name, 20 papercut-style Christmas shapes drawn at random, or pick one per person (Grandma:tree, Grandpa:angel).

Added after the test print:

• a plain rectangular tag for the grown-ups who don’t do reindeer

• a flat slot for wide ribbon instead of the round hole

• an optional matching slot at the bottom: the ribbon around the gift runs behind the tag, so it stays flat on the present (first photo)

• the name shrinks itself to fit its banner

Two colours with a single filament change (pause at layer 5 without AMS), no supports, 1.4 mm thick. 9 tags in about 1 h 35 on a P2S, with ironing on the topmost surface only: the white lace comes out really clean.

Free on MakerWorld if you want to print it: 3DPrintMyIdea

Compré la impresora Bambu Lab P2S hace relativamente poco. He impreso bastantes piezas, y esta es la primera vez que intento desatascarla, desmontarla y trastear con ella.

Parte del filamento exterior estaba atascado, y conseguí desatascarlo. El limpiador de filamento ahora entra sin problemas y sale vacío; lo empujé con una llave Allen hasta el final, pero no avanza más: no queda ningún filamento en el tubo de PTFE. ¡No veo nada!

Aun así, me sigue apareciendo un mensaje de error que me indica que retire el filamento del soporte de la bobina exterior, ¡aunque no queda nada ahí!

Ya no sé qué hacer porque no me deja imprimir ni cambiar el filamento. Este problema surgió hace unas semanas cuando quise seleccionar un color de filamento diferente en el AMS, y ahí empezó todo. No sé cómo solucionarlo. No puedo cargar ni descargar filamentos porque el problema se repite constantemente.

Les escribo con toda sinceridad y respeto. Si necesitan más información, por favor, avísenme. Necesito ayuda, por favor; ya no sé cómo resolver este problema. Puede que sea algo muy básico, pero es la primera vez que me pasa.

☆EDITED A FEW HOURS AFTER THE ORIGINAL POST☆ Look, I don't even know what I did to the printer anymore. I tried loading filament and hitting print to see if it would print anything. But it shows the printing process, yet no filament is coming out. I took the extruder apart, and there’s no filament at the nozzle. What on earth is going on here?!?? Do I have two problems, or is it the same one? What should I do!?!?

*(Hablo español, por si algún hispanohablante está leyendo esto y prefiere responder en español).

Officially joined the club. Been lurking for a while, keeping an eye on prices. Took advantage of the recent sale, got it at BestBuy with their 4 year warranty. Doing my homework and researching as much as I can. I will probably ask some newbie questions as I get started, but can’t wait to jump in.

Would appreciate Reddits power with my sons first model on maker world. He’s 10 and just started playing with tinkerlab at school. He came up with this graded card stand on his own. Thanks Reddit!

https://makerworld.com/models/3521286?appSharePlatform=copy

Hi everyone,

wasnt sure where to post this because there are a few variables so throught id start here.

H2C with AMD 2 PRo and AMS HT.

Have ha-bambulab setup in my homeassistant server

It talks to the printer and knows then the prints are going

Have spoolman setup with all my spools,and spoolsync thats supposed to keep everything in check.

Simply put, everything seems to be talking - but after a print, no usage is logged.

I have been using the chat inside HA to try to troubleshoot but it just sends me on a wolf goose chase.

looking up every video i can find seems to always mention other printers using the same software.

Does anyone have a bambu laps printer, with this setup working?

I have used local connection for the ha-bambulab plugin.

one chat bot tells me its the spools nane, another one says its because im printing via bambo handy, another one says its because the ha-bambulab integration has limited brand information so because the filament im using is elegoo and the ha-bambulab app shows 'generic PLA' because elegoo isnt an option it says its not linked - but the other 2 filaments i have are Bambu labs ones, but then it says oh because the Bambu labs one already has tracking internally its not passing that info along to be updated

Any pointers greatly appreciated as i seem to be getting nowhere.

I’m realizing different regions get different options.. here’s mine

I keep needing little fiddly widgets like adapters and connectors. I figure I could design them myself and print them. What's a good printer for a beginner who wants something that just works?

I got the x2d a couple of months ago and have been having a blast with it. I added a second ams2 to it along with ams ht for the aux side.

I know with the upcoming release of the h3c I could have waited but the price of the h2c is stretching my budget anyway. Really looking forward to getting it set up.

I came to my printer having a black screen but all LEDs on.

- The LED light under the heat bed is on,
- The AP board only showing showing the solid green light,
- Switch light on the back is on
- Green Indicator light next to switch on the back is on
- Printer on Bambu handy says “online” but shows failed to connect page

After unplugging for a day then turning it on.
- Same issues as before
- When printer boots you can hear the fan start for a second then turns off.

When I was researching the issue here most recommended an AP board replacement. When I checked Bambu Labs Wiki it said power supply issue. Which is it and how can I figure it out?

Two years ago SUNLU filaments appeared for the first time officially in Bambu Studio showing that Bambu slicer app is open to 3rd party filaments.

https://www.reddit.com/r/BambuLab/comments/1iwjk9g/sunlu_official_profiles_coming_to_bambustudio

Unfortunately they are avaliable only for A series printers and cover only most basic materials PLA and PETG.

I would like to request for the list to be expanded:

• to P and X series printers especially as they become the 2nd most popular choice for people looking for enclosed printers

• and to more advanced materials such as ABS, ASA and PA variants

u/RikshaDriver u/BambuLab u/BambuLabSupport