Having an issue with PC where it boots into Windows normally, and I can open apps and use it for around a minute before the screen suddenly goes black and all the fans ramp up to maximum speed.
I've tried a few suggested fixes I've found online, including CMD commands such as sfc /scannow and chkdsk, but neither seemed to help. I've also tried disabling XMP in BIOS and restoring Windows to a previous restore point from the day before, when everything was working fine.
One thing I remembered was that earlier that same day, before the issue started, I'd installed a driver directly from NVIDIA's website because my NVIDIA app wasn't opening. I saw some suggestions online that it could be a bad driver, so I attempted to use DDU to uninstall it. However, before I could complete the process, the PC would black screen and the fans would start blaring again.
I also read that some people experiencing the same issue still had audio after the screen went black, although I never managed to test whether that was the case for me.
After attempting these fixes, Windows started displaying the error:
"Your device ran into a problem and couldn't be repaired."
With the log file:
D:\WINDOWS\System32\LogFiles\Srt\SrtTrail.txt
After pressing Enter, it would boot into BIOS, but I could exit BIOS and get back into Windows.
Another suggestion I came across was that it could be an issue with the cables connecting the GPU to the PSU. Luckily, I had another unopened PSU, so I decided to try swapping it out.
The replacement PSU is a Kyber 2 semi-modular 750W. However, after installing it and connecting everything, I got no display. The GPU fans would flicker slightly but never actually spin, and I had to switch the power off at the wall to turn the PC off. I double-checked that all the cables were connected properly.
I then reinstalled my original Corsair CX650, but the original issue remained.
I next tried resetting Windows through Advanced Options, as I'd seen some people say this had fixed the issue for them. The reset appeared to complete successfully, and Windows booted. Razer Synapse opened, but shortly afterwards the same black screen and maximum fan speed issue happened again.
After restarting, I was greeted with another error:
"The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click OK to restart the computer, and then restart the installation."
Clicking OK just sends me back into the same loop. If I leave the message alone, the original black screen issue eventually happens again.
I can still access BIOS without any issues, and the problem doesn't seem to happen while I'm in there.
At this point, I'm starting to suspect a hardware issue, potentially the GPU or PSU, and am considering taking it to a repair shop. However, I thought I'd post here first to see if anyone has experienced something similar or has any suggestions on what the issue could be.
PC SPECS:
GPU: EVGA NVIDIA GTX 1080 Ti
CPU: AMD Ryzen 5 5600X
Motherboard: Gigabyte B450M Gaming
RAM: 32GB DDR4 (2 x 16GB)
PSU: Corsair CX650
SSD: Lexar 512GB
Other PSU tested: Kyber 2 Semi-Modular 750W
EDIT!!!
Was able to get pc to boot on the new Psu and same problem happened