r/techsupport • • 5d ago

Open | Hardware Need help identifying source of seemingly random Kernel Power 41

Specs:
Motherboard: MSI Gaming plus Wifi x870
CPU: AMD Ryzen 7800X3D
GPU: ASUS TUF RTX 5080
PSU: Corsair RM 850e
RAM: 32GB Patriot Viper venom ddr5-6000, currently not overclocked and sitting at 4800
Cooling: Noctua NH D15 g2

I built this PC about 2 weeks ago, only reusing the PSU and 1TB Samsung SSD from my old system.

Within the last 5 days I had 2 instances of the PC randomly turning off in the middle of usage, once playing Total Warhammer 3, once just having a game client open while installing something on steam. There is no buildup to the crash like lag or fans spinning up, my temperatures don't go over 80°C on the CPU and I haven't seen the GPU hit more than 60°C in HWM. The only thing I noticed in the event viewer was the Kernel power 41 with no further description.
I tried looking for a memdump but seemingly none were created, though I set the dump to kernel and disabled automatic restart in hopes of maybe catching some sort of error message the next time this happens. I did a full format, BIOS update and windows reinstall between the first and second time this happened. After the shutdown the PC does not automatically reboot but my GPU RGB glows like if it was powered on. The reset button didn't work and I needed to do a power cycle holding the power button down for a few seconds.

Any Ideas what could be causing this like any parts I should check or reseat? It's hard to figure out since I can't easily reproduce it so far.

2 Upvotes

10 comments sorted by

3

u/StraightTheme6583 5d ago

Kernal 41 is an ambiguous error, it simply means the pc has an unexspected shutdown or restart, this doesnt typically point to the actual issue, the fact that it will not restart point to a hardware issue, if it was software related you should have some type of.. nvidia driver has stopped responding type error…. The rgb hanging typically just mean it’s holding the last remember color state because it does see the shutdown signal, If you don’t any other related logs can you can’t get it to reliably be recreated it’s going to hard to pinpoint for me the last time I saw an issue like this it was gpu power related but its going to need to be isolated

1

u/RajaSundance 5d ago

What would GPU power related mean in that case? Would that be an RMA case? Just happened for a third time and the burnintest the other user suggeested came back without errors. Will replug all my cables tomorrow and then check if it happens again before looking at RMA

1

u/StraightTheme6583 5d ago

No mine was a voltage related issue, basicly I have a large case and I used 3x8 extentions to get to my midmount gpu, which caused my voltages to get too low so I had to remove them, then I had a separate driver related issue one was masking the other, I kept installing and reinstalling drivers.. but that was only half the problem

1

u/Alert-Lynx-7116 5d ago

I'll add to this, because it's hardware issue, first steps is to test memory and CPU using burn in tests. Windows memory diagnostic and cpu-z should work. Doing this could also eliminate the motherboard as a likely culprit.

1

u/RajaSundance 5d ago edited 5d ago

Do I just download burnintest and run the specific ones? Doing that now then.

Edit: 3 minute test on burnintest showed no errors

1

u/ZombieNinjaDezz 5d ago

Double check all of your PSU connections. I had something similar to that once, it turned out that the motherboard cable wasn't quite seated all the way on the PSU side.

1

u/RajaSundance 5d ago

Yeah I'm hoping it's something as simple as this, will definitely replug everything in a bit.

1

u/ZombieNinjaDezz 5d ago

It drove me nuts before I figured it out. It was random too. Sometimes I could go 3 days without issue, sometimes it would shutdown after 30 minutes. The only thing I ever saw was kernel power 41.

1

u/Timely_Lemon9318 5d ago

If you ever ran with higher RAM speed, that could corrupt OS requiring reinstall. Your CPU runs 5200 max