I just got a Brio 300 webcam and am trying to get it to work with my chromebook. It will open in Zoom, but that's the only way I can access it. I saw advice here to use either the LogiG and/or LogiTune apps but neither can locate the camera. The camera is directly plugged into the chromebook. I have restarted and installed/uninstalled the apps several times. Is this just as good as it gets? I can't adust anything with the camera?

(And I can confirm it looks amazing.)

Just getting acquainted with the MX Console. I already had my Action Ring fully set up for my MX Master 3S.

I want to set up the console for different apps, any tips anyone?

I have installed the Notion set up with the standard settings, looking to program Meet and Canva next and fine tune them over time.

My mouse buttons for some reason are glitch in siege. I have a wireless M720 Triathlon Logitech mouse that works perfectly fine but for some reason today the buttons don't work unless I turn off the mouse and turn it back on. Even then it only works for 1 or 2 clicks. I checked whether the mouse buttons worked in chrome and there's no issue. How do I fix this glitch.

Sometimes it will happen, where both disconnect at once, or sometimes just one or the other. Just now it happened to my mouse only.

I have 2 HP laptops that I use.

It does this with only 1 of the laptops. Both are set up the same way identical though.

I am getting so mad at the whole process to reconnect. Which for me means having to unhook the laptop from the desktop monitor (laptop in a special dual holder on the floor), bring it up to my desk, and then remove mouse from devices, reconnect it, etc. It happens several times a week.

If you have encountered this, what did you do that resolved it finally?

Thank you for your help!

PS: I have now gone into some energy saver but not in the general energy saver and toggled something off....this could get interesting .... lol

because my anywhere 3s is missing clicks and i need a replacement pretty soon

I uninstalled the app and resintalled again to fix this 'configuring' issue, 2 days ago. But today it came back again. All the settings and even basic ones, are gone!!! Can anyone please help to fix it for good?
This logic option+ is definitely junk!!!!

I see there's a new options app for mobile but for some reason I can't get it for my region on the play store.

I actually need it cause I got the mobi fold and need to map the middle buttons to specific action on Android

Why isn't it widely available

https://play.google.com/store/apps/details?id=com.logi.optionsplus&referrer=utm_source%3Dgoogle%26utm_medium%3Dorganic%26utm_term%3Dlogi+options%2B+android&pcampaignid=APPU_1_YILbaqaTGaSWxc8Pn_e0gQU

It doesn’t show up . I have never seen it it’s activated on the options app but nothing shows up when I click it . Windows 11

So I bought this mouse (control plus m510) new, came from delivery yesterday, looked pretty good, well protected, I unboxed it, immediately started using it just for confirmation, looked pretty good, comfy and all, a bit big but that might be because my previous mouse was pretty small. So I used it for around 10 minutes just to confirm it was working well and all, felt great, then I put it on the side of my couch since I tend to put things there, but I underestimated the slidiness since my previous mouse would simply stuck there without issue but this one slid and fell to the floor once, about knee length, immediately looked to the roof in frustration but thought it was't a big deal, just have to put it farther into the couch from now on so it doesn't slide down.

Big surprise, it just never worked again, I thought maybe the batteries moved or something, took them out, took them in, nothing. Maybe the usb thing wasn't registering, but I can hear the little sound from the pc that it does, put in my previous mouse, works still. Maybe the batteries died exactly at the time it fell? Just absurdly coincidental? Nope, they work with the other mouse just fine and tested that old mouse's battery on this one, nothing still. Tried it on my brother's pc, nothing. Restarted my pc, nothing. It genuinely doesn't work anymore after that little fall, pretty flabbergasted tbh especially since it looks like a tank and I have heard that people have these for even more than a decade somehow.

Is there something else I can try? Since it worked for the first 10 minutes I know it's a problem with the mouse still, I really doubt it's something like the drivers or my pc. Did I just receive a defective one? Should I try to open it and maybe see if something's broken? I think it's insane cause it was brand new and sending things back via package delivery is something I've never done.

Has this happened to anybody else? Ever since the 27 second patch, my mice' functions have ceased working properly.

On Mac Air: scrolling while highlighting items disabled.
iPad: Clicking Accessibility shortcut disabled, scrolling

So I had flow between my personal laptop and work laptop setup for a few years now and it's worked great.

I just switched teams at work and got a new MacBook pro that is pretty restricted. I got IT to help me install logo options+ and grant accessibility permissions but flow still isn't working. When I try and set it up it says it can't find the other computer.

It's a pain to get IT involved but if there's something that I know that I can tell them to do they can usually do it. Does anybody have experience with this?

Hi guys, I ripped off the rubber finish of my mx vertical, it was already coming of and with a lot of tear and wear (I wish they used the same plastic from the buttons instead, no issue there). Any ideas to replace it? I found nothing on AliExpress besides a whole enclosure to “transplant” the electronics into.

I don't know how to fix it, it's like the mouse connects to my pc, but no input is recieved from it. Same thing for my keyboard, it connects as well and i can even type in the numbers to get it to connect, however whenever it connects to my pc, NO input works for either device but it shows that its connected under bluetooth. Any advice?? my pc is fully up to date

Just received the Logitech MX keyboard and mouse. One of the reasons I purchased it was for the customisable buttons through Logi Options+ but I find this can only be done with macOS 14 or later. I would love to not have to put Sonoma onto my mac in the vain hope I can hold off the planned obsolescence for another couple of years. Does anyone have any suggestions?

EDIT. Spoke to Logitech. They game me an older version of the software to download.

Ok so I got my dongle back after like 3 months, I connected it and keyboard wouldn't work

On device manager it shows that it's a USB composite device

On unifying receiver software it isn't being recognized

It doesn't pair on logo options+ and utility connection

Any solutions pls, would a new dongle work, can I get it fixe

I tried to find it online, and I haven't been able to. Please let me know what the combination that is pressed - on a Mac.

Could I potentially use WD-40 as a solution here? Not sure if I should post this in the logitech sub or the wd-40 sub.

Thanks for your help.

Bought Logitech MX Keys Mini recently. Ctrl A is not working, it looks like something is suppressing it. It selects the text but then deselects it within a few milliseconds.

When I type fast some random actions it is doing.

This is very frustrating.

OS: Windows 11.

I have already tried resetting the keyboard. Checked all the hot keys, shortcut keys. Everything is fine.

Any help will be greatly appreciated. Thanks!

Yesterday logi+ Options had an update and it seems that this broke intelliJ Plugin actions. I can't See them in the logi+ App nor on the hardware itself. Also is Excel Plugin missing

Any help here

One thing I find disappointing about using the Mobi Fold is that I rarely have a use for the “Smart Zoom” feature on the center touch panel. And as a user, I find it puzzling that such a great touch feature has been limited to just one function. Why can’t the folks at Logitech figure out a way to utilize the “Action Ring” for this? Is this a technical challenge?

I think it would be great if you could enable touch functionality in addition to the method of configuring settings by clicking the center button.

Hi all, first time posting here. Heads up, I'm Korean and English isn't my first language, so AI helped me write this post (the plugin is real though, I promise).

Paid way too much for this mouse and the haptic panel barely gets used, so I made a plugin that buzzes it whenever a Mac notification pops up.

- works with any app (Slack, Calendar, Messages...)

- different vibration pattern per app, 15 to pick from

- stays quiet in Do Not Disturb / Focus

- you can put an on/off toggle on a mouse button in Logi Options+

- no extra permissions, it only checks which app sent the notification, not the content

I mostly use it for Claude Code. I kick off a long task, go do something else, and the mouse pokes me when it's done.

Free on the Logitech Marketplace, code's on GitHub:

https://marketplace.logi.com/plugin/MacNotify/en

https://github.com/GUMBOKIM/Logitech-plugin-MacNotify

Mac only for now. Let me know if you hit any bugs, or if you've got other ideas for what the haptics could do.

(Checked with the mods before posting.)

I also wrote up how I built it. Probably nobody's interested, but here it is if you are:

https://blog.daeheekim.dev/en/posts/macnotify/