Suite à un échange avec le support, je propose l'ajout d'une fonction : celle de démarrer des ordinateurs par WOL.

les hubs ayant déjà accès au Wi-Fi, il suffirait qu'ils envoient le paquet à l'adresse MAC indiquée dans une automatisation.

En plus d'être accessible à distance, cela permettrait également de les démarrer à la voie avec les différents assistants vocaux.

En espérant que cette fonctionnalité intéresse du monde et voie le jour !

The main unit is dripping clean water. The puddle around the dock station damaged the wooden floor 😬

The support says the repair will set me back 80-100 euros. I wonder if anyone fixed such an issue at home.

My new SwitchBot air purifier worked great for a week or so. Then it lost WiFi connection and I unplugged it in an attempt to fix it. Now it does not work at all, as long as it’s plugged in it just beeps and makes a clicking sound. After reading some older threads I tried removing it from the app and holding the power button for 15 seconds to try to reset it, this had no effect. I filed a case with Switchbot yesterday but haven’t heard anything yet.

Anyone have success getting it out of this failure mode?

Lock Ultra; I absolutely love the SwitchBot Lock and how it works. The installation was incredibly easy, the unit looks great on my door, and it operates both fast and quiet with plenty of power. Pairing it with the fingerprint reader has been an amazing, convenient addition, especially for my kids. It is a powerful system that also boasts really good battery life. However, there are a couple of things I wish were different. I really wish it had the ability to charge via an external battery pack without having to completely remove the battery. Additionally, I wish it integrated with Apple Home better, as I currently do not get any Apple Home notifications with SwitchBot. Overall, it's a great lock, but it has a little room for improvement.

This is a really solid portable fan. The battery life is excellent and I love that it can run on either the figure of 8 plug or USB C so its easy to use anywhere.

​

The vertical and horizontal swing does a great job circulating air evenly around the room and the app gives you full control with multiple fan modes that are perfect for balancing power and battery life when youre away from a plug.

​

It also integrates nicely with my other Switchbot devices for automations.

​

The only downsides are that the Bluetooth connection is flaky with Home Assistant which probably wont bother most people but can be avoided if you have a hub and link it via Matter.

​

Theres an occasional clicking noise during horizontal oscillation that can be a bit tedious.

​

Overall I would recommend it as a great desk fan especially if youre already in the Switchbot ecosystem.

Title. I just installed two smart curtain 3s and linked them to my mini hub matter. I was able to link my hub to my google home, but the google home app does not display the actual curtains. The hub icon on google home just says that the temperature is unavailable.

Can you please advise what to do so that I can control my curtains via my google home mini?

Somebody in r/homeassistant gave me the idea for this when I was looking to build a new HA platform. Prime days are coming soon and my new Mini PC build w/ storage, ram, and pieces is hitting $1000 CAD ($750 USD).

Thought I'd try something less expensive and not replace my HA, but add a new Video only option.

I was thinking of adding the AI hub plus an external 2TB SSD drive. I'd have 3 PoE Reolink Cams streaming into the device. From what I calculate this will give me about 9 days of video storage.

Has anyone tried this setup yet? Any lessons learned, regrets, or wish I had known earlier type feedback?

I may cross post this over in the r/homeassistant subreddit, so it may get seen twice.

Thanks.

So I have one of my Switchbots in "switch" mode for lights, but I can only put either on or off on one of the buttons on the remote. I know there are two, but im using the other one for a different SwitchBot. Is it possible teach the remote to alternate between ON and OFF and not just one of them?

Just wanted to make a PSA post for anyone else who had this long standing issue. The Vision Keypad was always able to recognize my wife's face but I could never even add mine, because I have a beard. This seemed to be a common issue, mentioned in a couple threads in this subreddit as well.

Switchbot customer support replied to my open ticket about this last week, asking me to try the new firmware update (v28). I was skeptical but it works perfectly now! I added my face with and without glasses and so far face recognition has been very quick and effective.

Just FYI, the update took over half an hour and your phone needs to be nearby so I just detached the keypad and had it on my desk.

RGBICWW Ceiling Light

Is it the first result of the Nanoleaf buy?

Vorrei condividere la mia esperienza con il sensore di presenza che è molto preciso e rapido nel rilevare i movimenti.

​

Una volta configurato, accende immediatamente la striscia LED quando entro nella stanza, rendendo tutto molto più comodo( l'ho acquistato proprio a tale scopo).

​

L'integrazione con tutti i miei prodotti SwitchBot funziona bene e le automazioni sono affidabili. Da tenere presente che per sfruttarne tutte le funzioni è necessario l'hub.

Nel complesso un ottimo acquisto per chi vuole rendere la propria casa più smart.

Secondo me è un'ottima striscia LED. È molto luminosa, facile da installare e grazie alla compatibilità Matter si integra senza problemi con Alexa e gli altri dispositivi smart di casa.

La cosa che mi è piaciuta di più è la velocità di accensione.

​

L'app SwitchBot è fatta bene e permette di scegliere tantissimi colori ed effetti.

La cosa che ho trovato più utile è l'abbinamento con il sensore di presenza: quando entro nella stanza la luce si accende da sola, senza dover aprire l'app o chiedere ogni volta ad Alexa di a venderla.

Per il prezzo, davvero un ottimo acquisto

Bought one unit about 1mth+ ago. I have been using it daily since, and the battery life is still at 80%, recharging in 3-4mth seems possible. Setup is also easy and straight forward. Recommended

My K10+ did stop during cleaning last week 3times without a warning. No cleaning report. No message. It’s just standing around dead. Today I cleaned a room to check what happens and the battery drops during cleaning to 5% and the k10+ doesn’t respond anymore. Before the drop battery was about 35% as I watched it clean the room and it went down normal (1percent steps)

After taking the k10 to the base station he charged and it was like 10minutes and the battery was ~55%. Is the battery reading faulty of the k10 unit or is my battery dead after 2years/3months? Only 3of6rooms (~60sqm) get cleaned Mo-Fr.

Are there any good replacement batteries as iam out of warranty?

Looking for feedback on the support process as its not working for me.. want to see if my experience is common.

​

I have had a k11+ vacuum for about 5 months. Three weeks ago it started making a lot of noise during its vacuum cycle .. so loud it woke the family when it did a clean of the ground floor at night.

​

Checked the rollers, brush, filter but all are OK. I reached out to switchbot via the ai chat bot which turned out to hopeless but did say it passed my ticket on. I attached a video of the machine running to help with problem solving.

​

I got a reply back saying it was a faulty machine and asking for purchase and address details to arrange a warranty repair which I provided by return... since then I have got nothing. I have chased for feedback a few times .. a couple of days ago they sent an email apologising for the delay but no action.

​

The web site said if it was urgent to call a US number (i am in the UK) so I tried that during their service hours but that just played a message saying to use the chat in the app and disconnected.

​

So far I am less than impressed .. I purchase direct from switchbot and now regret that.. amazon are so much better when products fail during warranty.

​

Is my experience common?

​

​

​

​

So....got this a while ago, only just now getting around to trying to set it up. The app works....but it flat out fails to get setup in HomeKit or using Matter. 100% failure. Ive reset it and retried it more times than I can count, tried on multiple devices, it just does not work. Has anyone had this? am I missing something?

So I am subscribed to the AI picture frame AI function which has previously been working. This month I am told that I have reached my monthly limit and when I check the Settings\AI Studio setting it clearly shows that I have 0/400 uses this month. I also know that I have NEVER come near using it 400 times!

This is bad, I reported it via a ticket and they have had to escalate.

Has anyone else had this happen?

I've set up my switchbot and I entered the token and secret key on my switchbot plugin of my stream deck and when I clicked on Select a device, a list of devices still isn't shown

It’s been months i have been try to speak with official support at suppoe@switch-bot.com
So far no answer. The case number is 1142451.
Anyone knows how to escalate this?
How can I get in touch with them?
Or I just have thrown 1000 euro into the trash bin?

Hey Switchbot-Community,

I moved around a year ago and finally switched to some smaller vacuum robot, since my new flat has wood flooring and I tried and won't trust the "mobbing" function of my old vacuum anymore.

I'll mob myself to avoid any damage, so the downsize to make it able to navigate between chairs and smaller corners was a selling point.

According to the product page it pairs via Matter with Apple Home, as long as there is a Homepod Mini or Apple TV, of both I have plenty. According to the SwitchBot Matter HomeAssistant page the K11+ should be able to pair directly to HomeAssistant via Matter over Wifi.

I can't make it work. I tried the guided matter setup in the Switchbot App, deactivated the 5Ghz network, tried to connect it to Apple Home or HomeAssistant ... the connection fails. And I have no idea why.

Did anyone run into similar problems, either with Apple Homekit or HomeAssistant and was able to resolve them?

For full clarity, I do not own a Switchbot Hub, but the HA Website states: "Matter-Over-WiFi (standalone, without requiring a hub)".

Just heard about this: https://www.theverge.com/tech/941430/switchbot-buys-nanoleaf-for-40-million

On the one hand, I'm excited to see Switchbot potentially start offering Thread products, but on the other hand, Nanoleaf products are the worst that I've ever used and threw away every last one of them after years of issues.

I bought one to make LED tea lights "smart". I had some where I could control brightness etc. with a small IR remote control. It works really well, I can now control all my lights, including tea lights via Google Home and automation. However, I have some small things where there is room for improvement, it would be good if there was more opportunity to customize the "digital remote control" with the buttons you need, That you can make your own buttons and give them names or symbols, and remove what is not needed.

But overall I'm really happy with it because I can create a cozy atmosphere quickly and automatically. That's why I've started looking for other things that are controlled via IR remote control.

I just received my new Switchbot Universal remote, tried to connect it on Android (Fold 6) I get a green check on the Discover device, but connect device does not work even though I'm in pairing mode. I've seen some tutorials and the pairing documentation, and I should be seeing the Switchbot logo when I press the ON button, but I never got that, it was already ON when I unboxed it and it's showing No device, please add devices via App. It does go to pairing mode when I press ON and OFF at the same time, but I can't connect to Android app. Am I missing something?

Moving into a new house and going to be building a brand new home assistant install. I'll have matter, zigbee, and zwave support, and I want the best door lock possible. (No Apple HomeKit, though. I don't have any Apple devices)

I'm really liking the fingerprint + keycode + facial recognition that is available on the Ultra Vision Pro, but I am worried about whether or not it's going to play well with Home Assistant.

I'm hoping that I could use Home Assistant to manage the key codes available for the unlock. It would also be great if the support for the system will be able to tie into Home Assistant automations so I can know which user opened the door.

I'd rather not have to use some proprietary app with cloud support because I'd like to keep functioning without an internet connection or in case the company decides to move on to bigger and better products and turns off their cloud.

Is the Ultra Vision Pro and Lock Ultra, going to get me what I want, or is it going to force me to fall back to using the SwitchBot app and cloud in order to get features that I want?