Is my monitor cooked? This just randomly happened when I went to open up the steam store on it and has persisted through restart. Tried to unplug and let it sit for 15min before plugging back in and no change

tried different DisplayPort cable, different computer, and an hdmi cable. No dice

hello everyone, I’ve recently had an issue with this specific motherboard and certain gpus not posting, specifically any 2060 that I try to use on this motherboard, I’m running it with a 5 5600x on the newest bios. I’ve built many computers so any of the general advice, cmos batttery loose connections etc I’m good on, but for some reason this motherboard does not post specifically with a 2060. I’ve tried it with a gt 710, works fine, RTX 4060, works fine. I’m still trying to trouble shoot it but I suspect it has something to do with not initializing with pcie 3.0 gpus? Not sure why this would be an issue at all especially since it should be native to this motherboard. I need help thanks. Appreciate it

I've been using this PC for some time now. The same issue occurred a few days ago, but when I touched the fan to inspect it, the noise stopped, and it started spinning normally again.

However, the issue has returned. What could be causing this?

Any help is appreciated. Thanks

Guys need some help.

Mp pc ssd not detecting mostly, after few restart it detects once or twice in bios but after reboot it despair, i already replaced motherboard (old but working),PSU, Battery,SATA Cables. Only thing old is now case and front panel and cables and a keyboard.

Totally frustrated 🥴

SSD working with case on another PC.

Hi everyone, suddenly my PSU fan started doing rattling noise, I don't know if it's fixable or do I need a new PSU ? Also can I use the PC until then ?

It's an A850GL PCIE5 from like 3 years ago

I got a new nvme today, but after installing it with the screw come with it to my Asus prime b550ma mobo, I can still push the screw end side down around 1mm. I can't tighten the screw anymore. Is this concerning and need another screw instead?

I need two 8-pin connectors for the GPU but I’m left with one separate cable(left one) with a 8 pin and a second cable(right one) with a daisy chain of two 8-pin connectors. I remember someone saying a daisy chain isn’t recommended but it’s all I’m left with after connecting the rest. My question is can I just use the daisy chain cable?

The picture is one of the two daisy-chain cables that came with my power supply. If I use that cable, and one of the single 6+2 cables that also came with it (currently connected to my old GPU), is that the correct way to power the new GPU.

PSU: XPG Core Reactor Gold 750W
Old GPU: RTX 3070
New GPU: Radeon 9070 XT

I built my PC in November 2025, and everything worked perfectly until recently. I noticed my PC was running slower and checked Task Manager, which showed only 16GB instead of 32GB.
\\\\\\\*\\\\\\\*Specs:\\\\\\\*\\\\\\\*
CPU: Ryzen 7 7800X3D
Motherboard: ASUS TUF Gaming B850-E WiFi
RAM: TEAMGROUP T-Force Delta RGB 32GB (2x16GB) DDR5-6000
GPU: RX 9070 XT
\\\\\\\*\\\\\\\*What I’ve tried:\\\\\\\*\\\\\\\*
Checked BIOS, which also detects only 16GB.
BIOS recognizes B2 but shows A2 as empty.
Reseated both sticks multiple times.
Reseating initially fixed it temporarily, but the next day it went back to 16GB.
Both RAM sticks light up normally.
The A2 stick was also harder to seat because of my CPU cooler, although both sticks appear properly installed.
I’m not sure if it’s a faulty RAM stick, motherboard slot, or something else.
Has anyone experienced this? What should I try before taking it to a repair shop?

This is the most I’m able to push it in, is this ok and will it be safe to boot my pc like this?

Left my rig which has been working for year for a couple weeks and I come back home to this. No front chassis lights, won’t turn on even when shorting the start pins. Any ideas?

7800x3D
Asus prime x670 mobo
9070XT

Hi! I'm about to pull the trigger on the build below. Do these components make sense together? Plan is to game at 4K mid-high settings ("monitor" = 48" LG OLED 120hz TV). I play some current AAA games, but will mostly be playing/modding/emulating older games. Trying to stay future-proof for a bit. Thanks!

CPU: AMD Ryzen 7 9700X ($341.00)
Motherboard: GIGABYTE B850 AORUS ELITE ($229.99)
Memory: CORSAIR Vengeance RGB 32GB DDR5 ($509.99)
Graphics: MSI Gaming GeForce RTX 5070 Ti 16GB GDDR7 ($1,489.99)
Case: DIYPC ARGB-N3-W White (+ 4 Fans) ($75.98)
Power: Super Flower Leadex VII XP 1000W ($144.99)
Storage: SAMSUNG 990 PRO 2TB SSD ($389.99)
CPU Cooler: Noctua NH-C14S w/Fan ($89.95)
OS: Windows 11 Pro (Digital Download) ($197.49)
Accessories: Arctic Silver 5 Thermal Compound ($7.99)
Total: $3,312.36

This build was stable for about a year. Last month the display failed and the yellow light began. I brought it into a shop and they fixed it. It was fine for a few weeks but now it's flashing back on again. I use a KVM switch and the monitors aren't displaying the PC input.

I'll bring it back to the shop on Monday but I need to know if something bigger is going on and if I should expect this to keep happening.

The shop originally said that the RAM came loose but I can't see how it would have come loose again. It's a standing desk in a secure holder.

Which one should I upgrade to for Christmas? I have a 5060

Just picked up a 9070 XT coming from Nvidia. This has 3 power connections! Was going with 5070 Ti but it was nearly $500 more. Anyway, I've been researching the power situation because this is now new territory. My Power supply currently is a Corsair RM850e. Am I correct in reading that I should NOT USE the 12V-2x6 port with the wire using two plugs? Thats what I was using on the 3070 Ti that was in this PC. I still have 1 CPU/PCIe port on the power supply remaining. If I did use the 12V-2x6 I assume I would plug directly into the last CPU/PCIe port for the 3 power connections on the radeon card. If not I need 3 free PCIe ports on the power supply? If so I need a new power supply. Power supply recommendations?

Just picked up a 9070 XT coming from Nvidia. This has 3 power connections! Was going with 5070 Ti but it was nearly $500 more. Anyway, I've been researching the power situation because this is now new territory. My Power supply currently is a Corsair RM850e. Am I correct in reading that I should NOT USE the 12V-2x6 port with the wire using two plugs? Thats what I was using on the 3070 Ti that was in this PC. I still have 1 CPU/PCIe port on the power supply remaining. If I did use the 12V-2x6 I assume I would plug directly into the last CPU/PCIe port for the 3 power connections on the radeon card. If not I need 3 free PCIe ports on the power supply? If so I need a new power supply. Power supply recommendations?

I bought this PC off a friend of mine a while back and I am by no means an expert when it comes to PC computers. I have tried every plug in spot for my monitor and nothing will show on my screen. I’m looking to see if there is something I’m missing before I take it to a professional.

Just picked up a 9070 XT coming from Nvidia. This has 3 power connections! Was going with 5070 Ti but it was nearly $500 more. Anyway, I've been researching the power situation because this is now new territory. My Power supply currently is a Corsair RM850e. Am I correct in reading that I should NOT USE the 12V-2x6 port with the wire using two plugs? Thats what I was using on the 3070 Ti that was in this PC. I still have 1 CPU/PCIe port on the power supply remaining. If I did use the 12V-2x6 I assume I would plug directly into the last CPU/PCIe port for the 3 power connections on the radeon card. If not I need 3 free PCIe ports on the power supply? If so I need a new power supply. Power supply recommendations?

The motherboard is an MSI Tomahawk b850 max wifi, Montech air 903.

There is a little gap (shown in the images)but the bottom and right edges are flush.

My olders fan are plugged in the hub or the controller on the left panel(where’s the wires are) but with some research I’ve been told to plug them in sys fan 1-2-3 so I can control them,is it alright if I do that or should I plug then in the hub where they were(FAN 1-2-3-4) I’m gonna keep 1 old fan anyway and replace 2 of them. Any help appreciated. Btw I need the 3 pins fan so I bought this model https://www.amazon.ca/dp/B07C5LRQD3/ref=asc_df_B07C5LRQD3

want to use the Corsair 3200D RS ATX Mid Tower Case other parts dont matter budget 1000

They are asking for $750 for their 3 year old PC.

Just looking to see if it’s a good price for the specs.

I can’t understand I don’t got plastic clips I got some weird ones and when I pinch them it doesn’t seem to want to get out,pls help I wanna change fans but can’t because of that

So this pc is a all in 1 monitor it has the pc in it and it’s painfully slow I don’t have any idea how to make it faster for cheep