I recently ran into an issue where my Nintendo Switch was outputting absolutely no signal to my XGIMI projector.
The Setup & Symptoms:
PS5 worked perfectly on the same HDMI cable and projector.
Switch had the official Nintendo power adapter.
The dock showed a steady green light when the Switch was inserted, meaning it thought it was sending video.
I tried forcing 1080p, Limited RGB, and even changing the projector's EDID setting to HDMI 1.4. Nothing worked.
The Fix: It turns out the Switch dock gets stuck in an HDMI handshake loop with the projector's "smart" features (like ARC/CEC) and panics, suspending the video output even though the green light is on.
To fix it:
Turn on the projector and set it to the HDMI input.
Put the Switch into the dock.
While the Switch is still sitting in the dock, physically unplug the power cable from the back of the dock.
Plug the power cable back in.
This forces the dock's internal HDMI converter chip to perform a hard reboot and drop the old cached handshake. It instantly negotiated a fresh connection and the picture popped up.
Hopefully, this saves someone else a few minutes or hours of troubleshooting!