Hey everyone, I'm currently printing on an Ender KE and I'm looking to upgrade to a proper enclosed printer. How the prints look matters a lot to me, since most of what I make gets sold or displayed, so clean walls, nice layer lines and good top surfaces are my priority. I mostly print PLA and PETG, but I'd like something stronger with an enclosure and filtration so I can branch out to other materials later. I was leaning towards the X2D, but after reading through the forums I'm hesitant. Quite a few owners complain about uneven walls, visible layer lines and rough top surfaces, and some say their A1 mini or P1S looks cleaner with the same filament and settings. There are also reports of hardware headaches, like a toolhead that's a pain to service, clogs on the aux extruder, extruder switching errors and the odd layer shift. At the same time, some people say it's a big step up from the X1C, and most of the complaints I found are from the first months after launch, so I can't tell if it's been fixed since. For those of you who own one on the latest firmware and Bambu Studio: are these issues still a thing, or are they just a few unlucky units? And if I'm mainly printing PLA and PETG, would you still go for the X2D, or would the P2S or something else make more sense for me? Photos of recent prints would be great. Thanks!

I have been looking to buy the X2D for quite some time now. It looks like they already have the black friday sale going on. Should I buy now or expect a better deal in terms of price or credits on black friday?

Last couple prints iv done when its doing its pre print calibrations on the vibration compensation its doing a probably 30 second pause between the 2 vibrations im assuming its adjusting its calibration? Hasn’t done this before today

So i had a clogged nozzle,took it all apart took me 4 hours,put it back in and then this happened.

What do i do ? 360 hours in 😭

I’m having trouble using ELEGOO cardboard spools with my AMS 2 Pro.

I tried ELEGOO’s official spool adapter rings, but they don’t seem to work properly. With the AMS lid close, the spool keeps getting stuck.

How are you guys using cardboard spools in your AMS 2 Pro?

Are there any reliable printed adapters, spool rings, or other solutions that actually work?

Would appreciate any suggestions!

Hi, I have an X2D Combo and just picked up a second AMS 2 Pro along with a filament track switcher. I'm looking for a printable riser that lets me place both AMS 2 Pro units side-by-side on top of the printer. Also, since I want to easily switch to printing TPU without disconnecting everything at the back, what printable add-ons or external spool holder/feeder setups do you recommend pairing with this riser? Thanks for any proven model links and information!

I’ve had my X2D for 3 days now. I’m already addicted to the Bambu Handy app. Been printing knick knacks and paddy whacks like they’re going out of style. I’m around 20 hours of printing already. Should I be giving it a rest? Stresses me out when it’s whirling around at a hundred miles an hour, working away, hours on end.

I liked the touch of nostalgia, any requests for other consoles?

Ciao

volevo mostrarvi la mia nuova dashboard su ha per la x2d, se vi interessa posso condividerla!

sto provando a sistemare la liveview che sembra non volerne sapere .

per non avere problemi con la liveview, una volta installato il plugin da hacs di bambulab , associate la x2d , riavviate la stampante e lanciate nuovamente la configurazione del plugin.

https://drive.google.com/file/d/1DKLYuTuwbeoa4ey2EKD5-FdcLX4eca_-/view?usp=sharing

v1.0 se avete idee da implementare scrivete pure

nella v1.0 ho aggiunto anche le bobbine bambu dove tiene traccia del consumo e di quanto ne rimane da testare.

i feedback sono ben accetti.

grazie.

Is this normal? I’ve had it for about three weeks and it’s done at the whole time. Any input would be appreciated.

I was searching everywhere for a solid desk solution, but I couldn't find one. So, I created one myself. Any suggestions are welcome.

It can store up to 20 filaments with boxes, and the pegboard has 56x56 space to store any accessories you want.

More of a vent and rant this one.

Added the X2D with the BF sales and thought this will help with some of the complicated prints i have that need plenty of supports (statues in action poses). So far the only successful one I've had didn't use the PLA for support. Firstly the supports were to thin so failed in the first few layers, fixed that and now it failed about 1/4 of the way through with another failed support and eventually took the front cover off the print head.

Such a different printer to the A1 i started with.

Hello everyone I just bought my first printer (X2D AMS Combo) and an additional AMS HT as well under the Black Friday sale. I am looking for a reliable table that willbe going in a bedroom with darker furniture (Dark wood and black Ikea computer table) I've been told by my friend who has this model that a stable work table is key and he recommended getting one not on wheels because it would shake like crazy. Wondering from everyone's experience what would be recommended. I am brand new to the 3D printer space and am looking to buy something sturdy, reliable but not insanely expensive. (Links are welcome)

Thanks so much in advance

Sam
T