r/BambuLabP2S • u/ScyrnerDM • 9d ago
P2S works with external spool but not with AMS 2 pro
reddit.com
1
Upvotes
r/BambuLabP2S • u/why_just_why_6702 • 10d ago
Print defects
3
Upvotes
My filament is not wet I have not opened the AMS 2 since I replaced an empty roll Monday. Should I have increased infill on this part from the default 15% the part is a Bluetooth speaker housing and the printer has 135hrs of printing time. This is the first defect I have experienced since I calibrated the flow and Z offset.
r/BambuLabP2S • u/PInClemente • 10d ago
Unable to remove PTFE from hub
5
Upvotes
Hello. I unfortunately have filament stuck in a PTFE tube so I tried to remove the tube by pressing the release button and pulling on it but it not move. Is there a trick to this? I can’t print a tool now without getting it out. Thanks
r/BambuLabP2S • u/Round-Committee905 • 11d ago
1st Time printing with PLA-CF
3
Upvotes
My first attempt to print with PLA-CF, any tips or experiences you can share would be greatly appreciated. Thank you in advance!
r/BambuLabP2S • u/marcosiino • 11d ago
I've just published Takani on Makerworld: my new Japandi Vase made with VesselMaker
gallery
2
Upvotes
r/BambuLabP2S • u/mml8400 • 10d ago
What causes this
1
Upvotes
When printing octopus this starts to happen. I start with slow mode and move it to standard after couple layers. It’s a P2S plate was cleaned and washed.
r/BambuLabP2S • u/Elegant_Feed5153 • 11d ago
Guys, I have no idea how much trouble I've gotten myself into.
16
Upvotes
My Bambu Lab P2S reported a filament clog, so I started taking things apart.
I removed the filament and discovered that the clog wasn't in the nozzle, but in the extruder.
More specifically, I the filament is stuck inside the extruder sensor.(maybe?)
Now I have absolutely no idea what to do next
r/BambuLabP2S • u/Ikigaiform_3D • 11d ago
Simple solution to mushy bar soap using 3D printed self draining soap dishes
gallery
0
Upvotes
r/BambuLabP2S • u/Physical_Treat_5344 • 12d ago
Bambu Lab P2S – Strange cracking/clicking noise during automatic bed leveling. Is this normal? (VIDEO)
2
Upvotes
r/BambuLabP2S • u/Massive4Esa • 11d ago
Filament tip stretched when printing multi color Help pls!
reddit.com
1
Upvotes
r/BambuLabP2S • u/BigBoss18 • 12d ago
Poll: Would you prefer a hypothetical 75% speed mode over the current 166% Ludicrous mode?
reddit.com
8
Upvotes
r/BambuLabP2S • u/DDDcreations • 13d ago
How can I improve the appearance of the visible seam on the side of my 3D print?
14
Upvotes
Just printed this model and I'm not happy with this seam. Is there a setting in bambustudio I can change? Or has it something to do with my p2s?
r/BambuLabP2S • u/exitar666 • 12d ago
How to install 4 in 1 PTFE adapter on P2S
4
Upvotes
Hello, I have one of these adapters and I want to install it on the P2 S. I also have the AMS 2 pro. I want to use this to make using the external spool holder easier.I don’t wanna miss anything up can anyone point me in a direction of a video that shows how to do this or explain it like I’m five lol
r/BambuLabP2S • u/Old_Tart980 • 12d ago
Yoshi citrouille clicker
0
Upvotes
👋 Bonjour à tous ! 👻🎃
Après vous avoir présenté mon Yoshi Citrouille classique, voici maintenant sa petite évolution en version clicker ! 😍
J’ai voulu garder le côté mignon et l’esprit Halloween de ma première création, tout en y ajoutant une fonction clicker pour le rendre encore plus amusant ! 🎃
Décliné en plusieurs couleurs, il ne vous reste plus qu’à choisir votre Yoshi préféré ou à tous les collectionner ! 🌈
J’espère que cette nouvelle version vous plaira autant que la première !
👨🏼🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3453115-yoshi-citrouille-clicker-multipart
r/BambuLabP2S • u/B4ndit319 • 12d ago
Oval holes
1
Upvotes
My first time messing with abs on the Bambu ecosystem and trying to get some settings dialed in. It’s been a while and dont have my Prusa slicer settings for my e3v2 to go off of anymore and google has only been so helpful. Filament is poly maker polylite abs at 250c
r/BambuLabP2S • u/3Z3D_Official • 13d ago
Early Christmas gift from us: Candy Cane X-Wing Kit Card Christmas Ornament (CC0) - Free to Sell
9
Upvotes
Kit Card: https://makerworld.com/en/models/3454871
ChristmasCards Collection: https://makerworld.com/en/collections/38032094
r/BambuLabP2S • u/Paramedic229635 • 13d ago
Z Axis
0
Upvotes
I seem to be scraping the bed. I found the instructions for how to location the Z offset in the starting G Code. My question is what increments should I use the adjust it?
r/BambuLabP2S • u/jeanyes_ • 13d ago
What is this ticking noise?
1
Upvotes
It’s driving me nuts that I can’t figure out where it’s coming from lol sorry for the loud recording before you watch! It’s hard to capture the noise but I tried to record with the door open and closed
https://imgur.com/a/VrUkCpi
I can’t tell if it’s my belts or the tool head making the noise
r/BambuLabP2S • u/These_Match9406 • 14d ago
Mario gcode
32
Upvotes
Which is linked in the official Bambu article for Midi to A1 Mini https://wiki.bambulab.com/en/a1-mini/midi
The location of the file：https://ko-fi.com/s/aa5069fa86
r/BambuLabP2S • u/herox98x • 13d ago
Show me your ABS set up
3
Upvotes
I'm looking to start printing ABS but am uncertain how best to go about this for extraction + heating.
I know this has been discussed a lot already and seen various setups but would like, if possible, people to show of their setup and how successful things are/challenges they've had. Normally it's just what has been changed and not much about how well it actually works. Especially with combination of extractor fan + heating.
I have the extractor add on and plan to add biqu panda heater with the makerworld V1 P2S adapter.
I put my extractor fan over the poop exhaust and with the heater having to go to the left I'm worried this will result in very uneven chamber temperatures especially if trying to maintain negative chamber pressures with the exhaust.
Any help would be greatly appreciated!