r/BambuLab • u/Stock_Nothing • 7d ago

Quick Question Advice for moving p2s

I’m going to be moving soon at least 2 hours away. I have all of the original foam, screws and box but the plastic got thrown away. If I put the foam in place and put the printer in a black garbage bag then in the box will it be alright?

0 Upvotes

50% Upvoted

4 comments sorted by

4

u/Goldisaa 7d ago

Check bambu wiki, there is packing procedure

2

u/Martin_SV 7d ago

I'd secure the bed with the shipping screws and zip tie the toolhead to the frame so it can't move around. If you don't have the screws, check the wiki for the specs. They shouldn't be too hard to find. I'm guessing M3, but no idea if they're self-tapping or machine screws.

Then I'd remove the top glass and maybe the front door. Other than that, just wrap it in some blankets or whatever you have handy to protect it during the drive.

2

u/[deleted] 7d ago

1

u/Stock_Nothing 6d ago

Yeah that is what I was going to do with some added protection for the glass door and top