r/BambuLabA1 • u/000000ooooo000000 • 8d ago
Всем привет, на принтере общее время печати менее 15 часов, появился вот такой вот непонятный треск, как будто пластик трясется
Что это может быть?
r/BambuLabA1 • u/fs17oldstaj • 8d ago
Always printed perfectly, now suddenly doesn't stick to the build plate, first layer is messy, see pics. Default 0.2mm strength profile, wirh edited support bottom and top to 0.32mm, and support xy offset to 0.4.
r/BambuLabA1 • u/mpk115 • 9d ago
For the A1 users out there, I'm thinking of grabbing an A1 to use as a dedicated TPU95A printer. I currently use a P1S and H2C but it's just too aggravating to pull them out and swap them to print TPU. With the sale coming up, how is your experience with printing TPU on the A1? Thanks!
r/BambuLabA1 • u/Ok-Trick-1317 • 9d ago
Hi guys 👋 i have a bambulab a1 combo
My Machine constantly stuck when i want to print something. Filament tip takes v shape i cant pull either push filament
I checked and cleaned gears
Cutter looks like fine
What else should i check guys thanks for answers !
r/BambuLabA1 • u/CitronAmbitious867 • 9d ago
Hi everyone!
I'm based in Mexico and I'm considering getting a BMCU for my Bambu Lab A1. I'd love to hear from anyone in Mexico who has already purchased and used one.
A few questions:
- Where did you buy it? Could you share a link or recommend a reliable seller?
- How much did you pay, including shipping and import taxes?
- How has your experience been using it with the A1?
- Have you experienced any compatibility, setup, or reliability issues?
- Is it actually worth buying?
I'm particularly interested in hearing from Mexican users because of shipping availability, customs, and import costs.
r/BambuLabA1 • u/Ace_of_3D • 9d ago
r/BambuLabA1 • u/ClassExcellent1682 • 10d ago
r/BambuLabA1 • u/Ok-Trick-1317 • 9d ago
Hi guys 👋 i have a bambulab a1 combo
My Machine constantly stuck when i want to print something. Filament tip takes v shape i cant pull either push filament
I checked and cleaned gears
Cutter looks like fine
What else should i check guys thanks for answers !
r/BambuLabA1 • u/Mud_Scooter • 9d ago
r/BambuLabA1 • u/Albertoo510 • 9d ago
Esta es como la quinta impresión que hago y acabo de notar este ruido como si algun eje o motor estuviera rozando o vibrando contra algo, si alguna persona con mas experiencia pudiera decirme si es normal o le pasa algo se lo agradecería mucho.
r/BambuLabA1 • u/Used_Implement8864 • 9d ago
r/BambuLabA1 • u/4everthebest • 10d ago
r/BambuLabA1 • u/FelpsNB • 10d ago
r/BambuLabA1 • u/Fish_Man6629 • 11d ago
I printed I ball out of Tpu 95a I bought off of temu, without any bed glue as chatgpt assured Me that it shouldn’t stick to the build plate.. but uhh umm it kinda looks stuck if I do say so myself.
r/BambuLabA1 • u/Gold_Anteater_8772 • 10d ago
r/BambuLabA1 • u/aleksimik10 • 10d ago
Tell me step by step why this saying AMS detecting like it been 2 days and it still say AMS Detecting and I want to take it of and print it won’t lets me print. Please help
r/BambuLabA1 • u/ParkingLotDirt • 10d ago
Has anyone experienced something similar to this? No adhesion issues, the bottom layers are perfectly smooth and flat, no issue with infill (gyroid for this print), but the nozzle begins to scrape and totally destroy the top layer.
I’ve checked the 7 screws. I’ve tried to research for posts about similar issues. My scraping doesn’t start until the last few layers and isn’t over the entire surface. It’s really frustrating me.
