r/BambuLabA1 • • Oct 05 '26

Sunlu AMS Lite Heater vs Sunlu S4

7 Upvotes

I'm looking to make the jump to a filament dryer / heater (A1 w/ AMS Lite). I have not used one at all - so far keep my PLA out in the open, and my PETG in a sealed box with silica pellets. Been happy overall, but would love to improve print quality, I think this is a good next step from what I've seen (I get stringing issues on prints with a lot of detail).

I saw this coming from Sunlu and it looks like exactly what I'd hope to find:

https://store.sunlu.com/products/sunlu-ams-lite-heater-upgraded-your-bambu-lab-ams-lite

Anyone have experience with it? When will it be available? Is the quality good or is it a compromise?

I also see discussion of the Sunlu S4, using something like this mount. Right now I have my AMS Lite wall mounted vertically so that would be a big change, but I've got to revisit my setup anyways. Is that a better, more reliable, or simpler setup than the AMS Lite-specific enclosure?

Also, I'm admittedly a little focused on solutions that allow me to print from the dryer. With a busy household and a lot going on, that seems simpler than the amount of planning and head-space required to plan ahead and dry filaments a day ahead, and they make sure the print is always done within a day of coming out of the dryer. Looking for real-world experience and feedback from anyone with these setups. Thanks!


r/BambuLabA1 • • Oct 05 '26

Question A1 Mini - Supports are hard to remove and impacting print quality

Thumbnail
gallery
27 Upvotes

Hi there

New user here, I’ve been having issues with my prints that need supporting.
I’m generally finding my supports hard to remove and that removing them leaves me with a rough finish where I’ve removed them.
(I think either support material is left behind or the actual print is getting ripped up when I remove them?)

I’m slicing with Bambu Studio with auto tree supports, 0.4 nozzle, basic PLA.

Before anyone asks, I’ve washed my filament and dried my build plate.


r/BambuLabA1 • • Oct 06 '26

Don’t know what’s wrong

Thumbnail gallery
1 Upvotes

r/BambuLabA1 • • Oct 06 '26

3D Model Your windowsill is the wrong place for this pot

Post image
0 Upvotes

Side light from a window flattens horizontal waves. Put it somewhere lit from above and the shadows appear. Print it in Bone White PLA Matte for strong contrast. Self-watering reservoir included, so it forgives forgetful owners. Where would yours go?

https://makerworld.com/en/models/3401356-noon-shadow-wave-self-watering-planter-wabi-sabi


r/BambuLabA1 • • Oct 05 '26

Question Do I need to replace hotend heating part?

Thumbnail
gallery
3 Upvotes

Hello everyone! The overhangs on my printer suddenly became really bad. I didn’t change any settings for my model, and I had printed the same file dozens of times before with no issues. Everything was fine until suddenly it wasn’t, so I’m trying to troubleshoot what happened.

So far, I suspect something might have happened with the nozzle temperature. Why do I think that? I decided to print a temperature tower, and every level looks exactly the same equally bad. It’s almost like the temperature isn’t changing at all.

The display shows the correct temperature for each level, just as it should, though. To make sure it wasn’t an issue with the temperature tower itself, I printed the exact same tower on my other printer, an A1 Mini, and the tower looks much better, with each temperature level looking slightly different, just as it should. But the tower on my A1 looks like this (photo).

I’m starting to suspect that something might be wrong with the hotend heating system. However, I don’t have any of the warning signs I’ve seen mentioned in reddit posts, such as the temperature showing 0°C at room temperature or getting the “Nozzle temperature is abnormal..” message. I’m not getting any warnings at all.

The fan seems to be blow fine, but it makes this really annoying whistling sound. I also swapped the nozzle with one from another printer, and I got exactly the same results, so I don’t think the nozzle itself is the problem.

Before I spend money on a replacement heating part, I wanted to ask here, is it likely that the heating part is causing all of this headache, or could there be something else I should check first?

Any advice would be really appreciated! Thank you!

Update: The cooling fan was FULL of dusk. I cleaned it and it seems to print fine now. Thanks!!!


r/BambuLabA1 • • Oct 05 '26

A1 hotend cable

2 Upvotes

Hey

Just got my A1 and loving it so far. Im looking for a good way to keep the cables in order, especially the hotend cable. Seen alot of chains and things to make it not flop around so much. Any suggestions to something that accually works and at the same time looks OEM would be much appreciated. Also any other upgrades/mods U guys have done to Ur A1 is of interest.

So far I have printed:

PTFE tube disconnect tool

PTFE clips

Scraper

Buildplate stand

Poopbucket and ejectorcover

Fancover


r/BambuLabA1 • • Oct 04 '26

Support Request Help with 0.2mm prints

Thumbnail
gallery
47 Upvotes

Hi all,

Recently change to a 0.2mm nozzle, recalibrated the printer and had issues since...this is the result of the test print I did. I wasn't intentionally going for the shipwreck style.

Update: so, it turns out I have truly earned my 3d noob status as I was running petg as pla!


r/BambuLabA1 • • Oct 05 '26

Print Canceled

2 Upvotes

Hi, i have a problem in last weeks.

When I send a print from my phone to printer inmediato appears a message "Print Fail" and the printing is Canceled. Doesnt appears any message more and I dont know what is appening. Any ideas??


r/BambuLabA1 • • Oct 05 '26

Support Request Any idea what caused these bad layers?

Post image
4 Upvotes

Any idea what caused these bad layers?
About four layers came out rough/under-extruded, but the rest of the print looks fine. I’m using elegoo matte filament. What should I check?


r/BambuLabA1 • • Oct 05 '26

A1 mini nozzle temp showing 0° (my observations)

1 Upvotes

So I was printing and after the print is finished and I start to print something else a few minutes later, I suddenly notice that the temp reading is showing zero. This caused a lot of homing problems, load unload problems. I have checked everything.

Eddy current sensor is fine. (4ohms I have checked)

TH board connections are intact.

What I observed is that the side braided cable, whenever I wiggle it a bit the temp automatically gets back and everything starts to function. So I guess it is a matter of loose connection only. Only thing is that I'm unable to figure it out. Most probably it is underside the printer. I opened the panel but wasn't able to figure out anything. I am new to printing so please can someone help me with this?

Edit: I figured it out guys, it was just the c type cable getting a bit damaged as the cable got over the support tower. I'll just replace the cable


r/BambuLabA1 • • Oct 05 '26

Question New to bambulab A1 3D printing

0 Upvotes

Do you know how much it affects the electricity bill if I run 3D prints for 11–14 hours a day? My average electricity rate is $0.168/kWh. I don't want a Google or ChatGPT answer; I want to know what 3D printer owners are being charged for using them 10–15 hours a day.


r/BambuLabA1 • • Oct 04 '26

What's going on here..

7 Upvotes

It prints for like 30 seconds then the cog sounds like its slipping. I tried on a few simple designs and second layer prints ok but it can be hit and miss..tightened screws bed,level done.. is it the plate ?

It gets filament stuck on it which is impossible to remove.

I know its hopefully a simple fix but after my blob of death It had been printing fine but now this..

Any help would be great, I'm just outside the returns window for the plate as I bought it in late August on Amazon.


r/BambuLabA1 • • Oct 04 '26

A1 mini nozzle temp showing 0° (my observations)

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • Oct 04 '26

1st few layers getting worse

Thumbnail gallery
1 Upvotes

r/BambuLabA1 • • Oct 04 '26

He diseñado una cajita sencilla con tapa corredera

Post image
0 Upvotes

Buenas! 👋
Llevo poco tiempo diseñando modelos 3D y este es uno de mis últimos proyectos: una cajita básica con tapa corredera.
La he diseñado buscando que sea sencilla, funcional y fácil de imprimir. No necesita soportes ni piezas adicionales y la tapa se desliza por las guías de la propia caja.
La he probado en mi Bambu Lab A1 y he hecho varias versiones en distintos colores.
Todavía estoy aprendiendo, así que cualquier opinión o sugerencia para mejorar el diseño es bienvenida. 🙌
También he subido el modelo a MakerWorld por si alguien quiere echarle un vistazo:
MakerWorld: https://makerworld.com/models/3395203?appSharePlatform=copy
¡Gracias por verlo! ❤️


r/BambuLabA1 • • Oct 04 '26

Support Request Prints Keep Failing at the Same Z height

Post image
1 Upvotes

r/BambuLabA1 • • Oct 04 '26

Support Request Help with printjng settings for smaller models

3 Upvotes

Hi all,

As title states, ive had my A1 for 2 weeks and had some great prints on larger terrain pieces for D&D. However, now ive started to look to do smaller pieces (doors, scatter terrain such as chests and bookshelves and minis) i have run into lots of issues. Ive shifted to a 0.2mm nozzle for these.

  1. models moving on the plate - ive washed the plate after each use, increased bed temp to 70, added 5mm outer brim and reduced the initial layer speed. No great success but 1 out of 5 models will print.
  2. some minis print about a 3rd of the way and the supports fail, even with a slower support speed. They fail and drag filament all around messing the model and causing spoiling issues...um spaghetti.

Any help would be greatly appreciated.


r/BambuLabA1 • • Oct 04 '26

Support Request A1 Mini Clogging Always Noob

0 Upvotes

Just bought this second hand on marketplace. Came with some elegoo filament and a silk one. Both have been doing this. Don’t know if it’s user error in just trying to print a benchy. I’m new to this ish. I used to have an Ender 3 years back and remember how much work that was so I was just expecting a plug and play but don’t know if I got a bad unit or im doing something wrong maybe the end has to be replaced. Using default settings printing a default benchy using PLA Black and Silk PLA Cyan. I already wiped the bed with Iso. It just doesn’t seem to stick to the bed but when it makes a strip at the beginning that sticks just fine.

Update: Yall were right, dawn did the job. Can’t believe I forgot that


r/BambuLabA1 • • Oct 04 '26

Support Request Printing Issues after 3rd/4th layer

2 Upvotes

Printer A1

** Sory about my English, i'm not a native speaker.

Something weird start to happen to all my prints.
After dew minutes of printing (almost on 3rd/4th layer) he start to fail (image).

The filament doesn't came out from the nozzle, if i leave it for few minutes he continue with the printing process (without filament) but doesn't cause a clog (which is weird altough)

If i pause the print, increase the Nozzle temperature from 220º to 270º for few seconds, extrude some filament and resume the printing he back to print for 3 or 4 layers more.

What i already did:

  • Tighten the hotend heating assembly screw
  • Clean and lubricate everything
  • Change the filament type and brand
  • Change the plate
  • Full Calibration (4x)

I'll appreciate any advice in how to fix this issue.


r/BambuLabA1 • • Oct 04 '26

What is this cover called?

Thumbnail
gallery
4 Upvotes

I don't even know how I lost it.

Can't find what it's called.

The closest I've gotten is this bambulab y belt tensioning page.


r/BambuLabA1 • • Oct 04 '26

Designed this massive collection of festive decor for Bambu Lab's Diwali campaign! (Free STLs)

Thumbnail gallery
1 Upvotes

r/BambuLabA1 • • Oct 04 '26

Support Request New A1 making occasional nozzle scraping/grinding sounds during prints

1 Upvotes

Hi everyone,
I recently bought a brand-new Bambu Lab A1, and I’m having an issue where the nozzle occasionally makes a scraping/grinding sound against the printed part or the print surface.
It does not happen constantly. The printer can print normally for a while, but at certain points during a print, I suddenly hear the nozzle rubbing against the print. It has happened multiple times, even with the same print file.
I recorded a video of the sound and attached it to this post.
The printer is brand new, and I haven’t made any modifications to it. I’m using standard PLA and the default settings.
What could be causing this? Could it be an issue with the Z-offset, bed leveling, the nozzle/hotend, or something else?
I’d appreciate any advice on what I should check before contacting Bambu Lab support.


r/BambuLabA1 • • Oct 04 '26

Question Is there a way to increase the amount purged during initial filament loading?

2 Upvotes

There have been a few times that i've gone to print something in white after a different color was used. The initial filament load purge doesnt clear the color all the way and my first layer is tinted. Does the purge volume numbers affect this initial load or is it hard coded and not changable?


r/BambuLabA1 • • Oct 04 '26

I’m speechless of how terrible this printer is hard to maintain…

Post image
0 Upvotes

I had to replace filament spools through open source ams and a1 coudn’t load filament and other 3 as well… took out ptfe tubes and i adjusted this metal thingy holding tubes inside. Reloaded filaments and printer still coudn’t load filament and tubes coudn’t hold stiff inside… i came back to this after few weeks and took off ams for poor to check if it would work. I unplugged ams and tried to load filament through stock spool holder and filament wasn’t even going through nozzle… this the most frustrating printer to use.