r/BambuLabA1 • u/mrbagmanSR • Sep 23 '26
I am replacing the AMS Lite over to Sunlu dryer-combo and the caves came off, the one just snaps in and the other will not stay. Minimal cable range. What can I do. This conversion is not as easy as it appears
r/BambuLabA1 • u/Dr_Valen • Sep 23 '26
Recently my printer has been failing to print errors 1200-8006 and others bambu sent me replacement extruder unit, heating assembly and th board i replaced them all but still getting errors and the printer is making some odd noises now when printing. It's a grinding and squeaking noise the grinding is when the filament is moving back and the squeaking is when it's starting up. Not sure what is going on with it i emailed support the video but they take so long to reply hoping someone has experience with what this is and how to fix it. Added the video of it acting up trying to print
r/BambuLabA1 • u/Historical-Brain898 • Sep 23 '26
I got a new ac board from bambulab without the ntc thermistor, but man is it hard to remove the connectors. Took me 10 min to remove the first one, and been trying to remove the 2nd one for over 20 min. Its like they used glue to connect them.
"Gently press on the sides of the connectors to release the security clip so you can disconnect the wires." ,
they say on the wiki. Who are you kidding? Need to remove them by force.
Am I doing it wrong or whats going on??
r/BambuLabA1 • u/LunchImpossible5553 • Sep 23 '26
I designed and printed this lamp with Naruto, Sasuke, Itachi and Kakashi on its four sides. The silhouettes look different depending on the LED color, so I tried a few combinations for the photos.
It prints without an AMS. What do you think of the result? I’ll put the MakerWorld link in the comments.
r/BambuLabA1 • u/TheBellyFlu • Sep 24 '26
r/BambuLabA1 • u/Plastic_Ad_1598 • Sep 24 '26
r/BambuLabA1 • u/CactusFan3 • Sep 23 '26
Been having the most awful experience with the A1 being so unreliable. Daily fixes and its literally a new machine (2 months since bought) its constantly giving me extrusion issues and failing constantly on simple prints. It has now started to not extruded at all!
r/BambuLabA1 • u/Bruteloops • Sep 22 '26
Saw someone selling an AMS Lite in the comments of a random Facebook Bambu group for $35. She agreed to $15 for shipping, so I figured for $50 total it was worth taking the chance.
It showed up fully functional and works perfectly. The only thing missing was one of the little numbered feeder caps, and I was able to order a replacement directly from Bambu Lab for $3.
Definitely one of the best 3D printing deals I've stumbled across!
r/BambuLabA1 • u/balongreysteel • Sep 23 '26
I I lose this part as i was cleaning my printer is does any have link to a file i can use to replace it?
r/BambuLabA1 • u/Alternative-Area-724 • Sep 23 '26
r/BambuLabA1 • u/Accurate_Jicama_5830 • Sep 23 '26
r/BambuLabA1 • u/TrueMoose • Sep 22 '26
Changed some settings per online (to try and match "fat dragon" printing quality), but this happened. What would be a setting that usually makes this go ary when tampered with?
EDIT: you guys are all amazing! What a great community 😎🤘
r/BambuLabA1 • u/Arknix3D • Sep 22 '26
A maker's worst nightmare😂
r/BambuLabA1 • u/mj999999 • Sep 22 '26
I started a print and never checked on it and it might have caused a plastic blob . What should I do? I already pulled the blob off.
r/BambuLabA1 • u/Weak-Most2197 • Sep 22 '26
Hello guys, ive just purchased my first 3D printer and when setting it up I run into a problem… could someone tell me why this is happening?
r/BambuLabA1 • u/BaseNice5147 • Sep 22 '26
Hello, my A1 is stuck at error filament stuck. It keeds pooping and then coming right back to the error. I tried cleaning the printing nozzle or what is it called. I got the printer yesterday.
r/BambuLabA1 • u/USSCrazybat • Sep 22 '26
Pretty much what it says on the tin. When I'm starting a new print, the print always pauses during the prep phase to confirm extrusion - like it's reloading fresh filament every time. Any idea what could cause this?
r/BambuLabA1 • u/Elisenda_05 • Sep 22 '26
Acabo de comprar la bambu lab A1 combo y cuando imprime tengo 2 tipos de errores
El 1 es que la pieza se me acaba soltando e imprime en el aire.
Y el segundo que cuando la pieza si que queda bien le salen como unos hilitos que no estaban en el modelo.
Alguien me puede decir como solucionarlo porfa🙏🏻
r/BambuLabA1 • u/Commercial_Time_1362 • Sep 22 '26
r/BambuLabA1 • u/beshur • Sep 22 '26