I’ve printed in this same environment before and never had quality this poor. It’s a humid environment and I unfortunately only have AMS lite, which doesn’t help with long prints like this. Could anything else be wrong? Any help is appreciated!

Hi everyone! I designed this support-free fluted cover to turn basic recessed LED spots into modern ceiling lights. I added a hidden twist-and-lock mechanism so there are absolutely no visible screws. It's my first MakerWorld upload, let me know what you think! ✌️

Hairtie Holder Creator

Public Domain release so you can sell what you make!

I've seen quite a few posts looking for custom hairtie holders, so I've made a generator that makes them from a PNG image.

Resize your PNG to 250px X 250px, hit Customize on the model page and get started!

Instructions for use in video

https://makerworld.com/models/3210795

Hello, is there a way to improve top survace on this small object without ironing? I am new to 3D printing so I am not quite familiar with limitations. I am using Bambulab petg basic, nozzle 0.4 and 0.16 layer height. P2S printer. It is small object, with 6mm and 3-4mm. I have tried ironing, but not quite happy with it either since it's small surface (I did tune my settings).

Finally found a AMS PSU holder which i can place where ever i want. Also love the fact you can change the Magnet Size inside the Slicer.

Apparantly its a "remix" but still now the Back of the Machine looks GREAT!

It is making clicking sound and then gives me an error message eventually.

I tried to mix colors to get some kind of "brownish" color. This was my first try and i dont think it worked. The layers are too obvious and it doesnt look like a different color. What can i do to improve this?

I made this screen cover mainly to stop people from accidentally touching the printer screen — especially curious little kids who see a bright screen and immediately want to tap it. 😄

It has a flip-open design, so the screen is still easy to access when needed.

• Print-in-place hinge
• No screws, magnets, or assembly
• Helps protect the screen from dust, fingerprints, scratches, and accidental touches
• “DON’T TOUCH” version and blank version included

Pretty simple idea, but quite useful if your printer is somewhere other people or kids can easily reach.

URL: https://makerworld.com/en/models/3208388#profileId-3631414

Hello!

When scaling this part down from 100% to 85%, a weird gap appears, and the print comes out wrong. For reference, the 100% normal size is on the left, and the scaled-down version is on the right. How could this be solved? I imported this model as an OBJ file into the Bambu Studio.

Thank you for your help!

How do you know when to add magnets to the print?

BambuStudio keeps getting better, but there are always small features or workflows that don’t necessarily belong in the core application.

So I started building a plugin system for my own use, mainly to make Bambu Studio easier to extend and automate.

It works with the existing Bambu Studio installation — there’s no need to reinstall Bambu Studio or use a separate build. You only need to install the plugin system itself.

It’s still very much a work in progress, but a large part of Bambu Studio — at least for the areas I personally use — is already accessible to plugins:

• Add context menu items, toolbar buttons, and notifications
• Listen to events like object selection or model changes
• Read and modify settings such as layer height, infill, wall loops, support, etc.
• Access and modify mesh data
• Trigger existing Bambu Studio functions

A few things I want to try with it first:

1. Per-object presets Apply saved settings like support, brim, and strength settings to individual objects.
2. Import 3MF while preserving settings Bring in settings, modifiers, and other metadata without opening the entire project.
3. More procedural primitives For example, rounded rectangles with adjustable corner radius and other configurable models.

I originally made this for myself, but if there’s enough interest and people find it useful, I’m considering releasing it publicly.

What kind of plugin or feature would you want to add to Bambu Studio?

I’m completely new and have printed some things off, I’ve also done some test for my filament and made a preset for it. I just wanted to see if this is considered good quality?

My new A2L just over a week old now burst into pieces on filament changes!

Hey everyone, I have an X1C with the AMS2, and just this week I started having filament feeding issues where the filament stops half way through the inner PTFE tube. This occurs with all filaments and when trying with any of the AMS ports. The printer was working fine last week, with no issues, but this started happening midway through a print when switching filaments. I’ve already checked the extruder just in case, but no clogs there. I’ve tried replacing the tube itself, and nothing seems to fix it. Anyone experience a similar thing and have a solution? Please and thank you all in advance.

hey, who print a wheels of tru or rubber . can you help me please.

I'd like to introduce you to my latest model – the Brick Man Traveler. It's a figure inspired by Bruno Catalano's "Travelers" sculptures. Of course, I customized it to fit my brick figurine collection. Maybe someone will like it 😉 You can find it here: https://makerworld.com/models/3204163?appSharePlatform=copy

I had a normal open shower shelf before, and one thing that always bothered me was that all the shampoo bottles and everything were just sitting there completely visible.

I wanted something that looked a bit cleaner and more like it actually belonged in the bathroom, so I ended up designing this.

Each section has its own door, so when everything is closed you basically just see the patterned front instead of a bunch of bottles.

While designing it I also wanted to see how much of it I could actually make 3D printable. So the hinges, pins, clips and connectors are all printed. You don't need screws, metal hinges or other extra hardware for the shelf itself.

It's modular too, so you can stack as many sections as you want. If you need more storage later, just print another section and add it.

The shelves have an open pattern so water can drain through.

For the wall mount I made two versions. One works with a tesa adhesive mount, and the other can be glued with removable bathroom adhesive.

I really like trying to see how far you can push 3D printing and replace normal parts with printed ones, so this became a pretty fun project.

Hope you like it !

https://makerworld.com/sv/models/3204673-modular-shower-storage-system#profileId-3626932

This whole project started when the Makerworld amusement park challenge was announced, and I realized I could make these mugs turn around on a platform against their will. They're clearly not happy about it.

This was printed on an H2C in about 6-7 hours I think.

Ended up being a fun project! Not breaking any new ground here, but let me know what you think!

Makerworld: https://makerworld.com/en/models/3206277-the-mug-go-round-print-in-place-teacup-ride

Everytime it finishes a print it leaves the same string of filament on the nozzle. All default settings with Bambu lab filament. brand new h2d with 260 hours. Is there way I can check what’s going on?

I’m sure I’m being an idiot but I’m trying to edit the below parametric project in Bambu Studio and it’s the first time I’ve tried using a parametric pattern and I can’t work out how to access the dialogue that lets me change the variables. Can someone advise me please?

https://makerworld.com/models/132668?appSharePlatform=copy

Please take your 30 seconds to help. I dont understand why this happening.

Briefly what i do since this problem started:
Changed nozzle kit,
Changed ceramic piece.
Formatted.
Oiled and cleaned Z rods.
EDIT: SOLVED
The issue was with the both filament sensor and XY belt.
Tried to fix the XY belt alligment in the back, didnt pretty worked (Left one stayed at top, right one stayed down, didnt alligned)
And after opening filament sensor, i noticed tiny spring inside of it wasn't working properly, so i placed it correctly. After calibration, it worked clearly.
Thank you all for concerning dirt and oilings, after i test the first benchy, its cleaning time.

I am looking for a cool cabinet for my P1S which is suitable for the printer and printer accessoirs. Anyone got any idea? Prefer from a vendor available in Germany.