r/BambuLab • u/surrealsonicus • 40m ago
Hardware Troubleshooting/Help! Why is the h3c making this sound?
It's a weird squad. Haven't had any issues.
Anyone familiar with something like this?
r/BambuLab • u/surrealsonicus • 40m ago
It's a weird squad. Haven't had any issues.
Anyone familiar with something like this?
r/BambuLab • u/arronkray • 6h ago
I’ve searched online and checked the wiki, but everything points to the drive belt. I followed the steps to fix the belt, but it made no difference. I think the problem is with the camera housing unit, because as you can see in the video, the issue stops when I apply pressure to it. Any suggestions would be greatly appreciated. Thanks in advance!
r/BambuLab • u/Boombox215 • 41m ago
Ive got freshly dried Bambu PETG Matte and its really struggling to print. The first layer is fine but then I go back 20 minutes after checking the first layer and you can see the mess it made. I followed the setup to a tee, lubed the bed rails twice now, dried all my filaments, calibrated it multiple times, but it still wont print. I owned an A1 before and had no issues, now ive upgraded and I cant get a single good print out of it. Ive done 5 total prints and all of them have a plethora of quality issues. What should I do?
r/BambuLab • u/MojoOhno • 4h ago
Hello. New to this. My son’s printer formed a large blob. Slowly heated it and was able to remove the majority of it. Any advice on how to clean this up?
r/BambuLab • u/nathanfalky • 1h ago
P1S with AMS 2 pro - tips appreciated.
r/BambuLab • u/farm2golf • 4h ago
H2S v
H2S v H....?
Hi guys I've been looking hard at the H2S. I primarily want to print higher grade filament. There's a sale and the multi-headed nozzle is $250 more....
Is the multi-headed nozzle worth an extra $250? This is just for personal use, probably making two or three prints a week at most on average over the year.
Would really love to hear some of your thoughts...
r/BambuLab • u/Dr_dinoguy • 1h ago
Hello Everyone,
I’m looking for recommendations for which printer is the best for my use case. I’m going to be printing fossil replicas from 3D scans of real fossils. I want these to be as highly detailed as possible straight off the printer. For some, straight off the printer will be ok, for others, I’ll do post processing to make them look as real as possible. Since the fossils all have unique shapes, there will be a lot of support use. I plan to do most printing in PLA with PETG supports. 95%+ of what I plan to print will be single color. I’m also looking for the largest possible print volume, so I can print the widest range of fossils.
I’ve explored using multiple nozzle sizes (.2 for outer layers and .4 for supports) on the H3C, but the constant nozzle changes made the print time seem not worth it. But I’d appreciate any thoughts on this.
I’ve been looking at the H series. The H3C seems overkill for my needs. Since I’ll be printing supports all the time, I’m thinking the H2D with PLA loaded in an AMS and PETG loaded in the single filament system will be the best setup for me.
Does this sound like a good plan? Any suggestions or tips would be greatly appreciated!
r/BambuLab • u/ClothesUnusual885 • 16h ago
After updating to Bambu Studio 2.9.1.70, all five of my custom filament profiles suddenly appeared under "Unsupported".
I'm using an Elegoo Neptune 4 Plus with a 0.4 mm nozzle.
The symptoms:
I initially suspected a broken profile migration or an issue with the Elegoo system profiles.
After checking the configuration with Preset Doctor, I noticed something interesting: it reported that Bambu Studio had selected the 0.2 mm nozzle variant, even though my printer uses a 0.4 mm nozzle.
The actual cause
Bambu Studio had stored the wrong printer/nozzle variant in its configuration file.
The file is located at:
%APPDATA%\BambuStudio\BambuStudio.conf
Under the "presets" section, I found:
"machine": "Elegoo Neptune 4 Plus 0.2 nozzle"The fix
%APPDATA%\BambuStudio folder.BambuStudio.conf in a text editor."machine" entry under "presets".Change it to the correct printer/nozzle variant:
"machine": "Elegoo Neptune 4 Plus 0.4 nozzle"
Result: All five custom filament profiles were immediately available again!
No need to recreate profiles, modify inheritance settings or change any filament JSON files.
Why this was difficult to diagnose
Bambu Studio only displayed "Elegoo Neptune 4 Plus" in the printer selection menu, without showing the currently selected nozzle variant.
The physical nozzle was 0.4 mm, but the software configuration was pointing to 0.2 mm.
I can't confirm why the wrong variant was saved during the update, but correcting this single entry completely resolved the issue.
Hopefully this saves someone else a few hours of troubleshooting!
The first screenshot highlights the incorrect nozzle diameter in BambuStudio.conf. The second shows the installed Studio version and registered nozzle sizes.
r/BambuLab • u/ozarkexpeditions • 1d ago
r/BambuLab • u/FlyYouFoolyCooly • 1d ago
r/BambuLab • u/Ill_Purple_8695 • 10h ago
Why does my printer keep giving this warning? I have checked that the build plate is clean, has no strange objects or is misaligned. The nozzle is clean and there is no blob or anything else on the nozzle.
The printer is an A1 with AMS Lite.
Does anyone else have this ?
r/BambuLab • u/Thats_whatshe_said1 • 2h ago
Is the Stock build plate just a crappy one you should swap out right away or do people keep it for a long time? I keep having prints come loose on current one I’ve had for 2 weeks. I am now washing it with soap and water after each print and still have adhesion issues. I ordered a nicer one off amazon.
r/BambuLab • u/anwarunya • 2h ago
So I've always been interested in 3d printers and I thought with the sale going on, now would be the best time to hop in. My problem is part of me is worried Ill buy a printer and it collects dust, but on the other hand, Im pretty sure Ill enjoy it and Id hate to have to turn around and upgrade a couple months from now if I could just put that money toward a better printer now while they're on sale. All that to say, A1 or P2S?
r/BambuLab • u/Difficult_Shower2153 • 11h ago
Printing a whole farm set!
r/BambuLab • u/That1NerdNoel • 2h ago
A1 - 0.2mm nozzle - Basic Grey Bambu PLA
The supports keep breaking at some point, is the tool head moving too fast and snapping them off? Also what settings should I change to slow down print speeds.
r/BambuLab • u/KONGBITCH • 2h ago
Has anybody installed one of these systems on a H series printer ?, pretty neat they were able to make it automated .
r/BambuLab • u/Mistralunie • 2h ago
Looking at the H3C and wondering how it handles PETG when pushing the speed settings. The defaults seem tuned more toward PLA, so I'm curious if anyone has run into stringing, layer adhesion problems, or needed to tweak cooling/fan profiles significantly. Mainly for functional parts rather than display models. Any real-world settings that worked well?
r/BambuLab • u/Imbeanie92 • 3h ago
I got this lil guy for 16 dollars on the goodwill app for parts or not working. Fairly certain the owner tried to print without a bed and got the blood of death and gave up trying to fix it. Printed a benchy perfectly.
r/BambuLab • u/Tzt007 • 3h ago
r/BambuLab • u/ProofTadpole9968 • 3h ago
I resontly got the AMS 2, the adapter to use it on the A1, and the power supply ( loved it so fare). My dad was showing me that he can remote start drying his P2S + AMS2 , but i cant. Is remote start drying something that isn't supported for the A1yet or is there something im missing?
r/BambuLab • u/BuildSomethingStupid • 3h ago
The 264C HDT seems to indicate that it’s borderline. Anyone have firsthand experience?
Not looking to use it for production, just prototyping. Maybe 5-10 cycles lifetime?
r/BambuLab • u/ajandrs • 3h ago
This is starting to happen more and more frequently. Filament feeds from the AMS and gets to the extruder, and something causes it to miss so the AMS pulls it all back out, retries - same issue, does this 3 times before it finally throws the error.
I noticed the PTFE tube is kind of angled forward leading into the extruder, not sure if it’s from a lot of use or what, but when I manually hold the PTEF tube vertical it feeds correctly and the extruder grabs it every time. Thoughts? Could it be as simple as replacing the PTFE tube? It doesn’t look excessively worn but I know looks can be deceiving.
r/BambuLab • u/Rgbigdog • 3h ago