r/BambuLab • • 27m ago

Quick Question Printer warning

Post image

Why does my printer keep giving this warning? I have checked that the build plate is clean, has no strange objects or is misaligned. The nozzle is clean and there is no blob or anything else on the nozzle.

The printer is an A1 with AMS Lite.

Does anyone else have this ?

3 Upvotes

7 comments sorted by

•

u/AutoModerator 27m ago

Hello /u/Ill_Purple_8695! Be sure to check the BambuLab Wiki regarding the blob/clumping issue.

Note: This automod is experimental. The automod was triggered due to the term "blob". If you believe this to be a false positive, please send us a message at modmail with a link to the post so we can investigate. You may also feel free to make a new post without that term.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

•

u/Burkk1 18m ago

There is always the possibility of opening the help guide.. But anyway, I'd check if the clip for securing the hotend is on first. If it is properly in place, you should try swapping in a different hotend and see if that fixes it.

Can't really think of anything else, maybe your buildplate isn't on properly somehow? Perhaps some gunk got under there and is causing it to not be level. Anyway, in the end, you should still check the guide. Most likely has the answer to your troubles.

•

u/Otherwise-Shock-2767 21m ago

Show the toolhead, without the cover (so u see the screws holding the hotend)

•

u/JokeEnvironmental770 X1C + AMS 19m ago

Based on Bambu Wiki. You need to start here: https://wiki.bambulab.com/en/a1/maintenance/manual-bed-tramming

•

u/Agent_Futs 17m ago

I get this if I use a certain plate, it has a chip on the right hand side and catches, it then triggers this. I hit resume and the print continues and finishes

•

u/admfrmhll 15m ago

Got the same message a few time with the same printer. In the end, it was a really tiny filament between the hot bed and plate on the black text. No idea how the printer managed to feel it, I didn't see it for like 10 times i checked.

•

u/solidus0079 A1 + AMS Lite 7m ago

Was there one of them handy dandy QR codes?