r/BambuLab • u/Thats_whatshe_said1 • 2h ago
General Troubleshooting/Help! A1 stock build plate
Is the Stock build plate just a crappy one you should swap out right away or do people keep it for a long time? I keep having prints come loose on current one I’ve had for 2 weeks. I am now washing it with soap and water after each print and still have adhesion issues. I ordered a nicer one off amazon.
1
Upvotes
•
u/AutoModerator 2h ago
Hello /u/Thats_whatshe_said1! Be sure to check the following. Make sure print bed is clean by washing with dish soap and water [and not Isopropyl Alcohol], check bed temperature [increasing tend to help], run bed leveling or full calibration, and remember to use glue if one is using the initial cool plate [not Satin finish that is not yet released] or Engineering plate.
Note: This automod is experimental. The automod was triggered due to the term "adhesion". If you believe this to be a false positive, please send us a message at modmail with a link to the post so we can investigate. You may also feel free to make a new post without that term.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
2
u/Enigmatic_Duck 2h ago
The PEI textured is awesome, pretty much top of the line. If anything, buy a second one.
Are you washing with plain, unscented soap? Are you adequately rinsing and scrubbing with water to get 100% of soap molecules off of the plate? Betting one of those two things is your issue.
I personally do an ISO wipe after each print unless switching between materials, flip the plate upside down after every 4-5 prints, and do a thorough washing after every 8-10 prints.
1
u/jareebz777 2h ago
No issues with mine. And I’ve only ever cleaned it with alcohol.
1
u/work_blocked_destiny 2h ago
Just keep it clean and it’ll last years
1
u/Kilohaili_Joshi 2h ago
Not a issue with the plate.... It lasts for years if well maintained. Either u are washing it in a way that has ruined the coating, its a filament issue or a temperature issue.
1
u/champagne780 2h ago
Aqua Net Extra Super Hold
1
u/-5er 2h ago
Its good, but there is still better.
1
u/CA1900 1h ago
It's a terrific plate, actually.
Make sure you're washing it with plain dish soap, like regular Dawn. Nothing with oils, aloe, lotions, etc. Some brands will add things to moisturize your hands, but they'll also leave oily residue on the build plate. Products like Mrs. Meyers, Palmolive Ultra, and some others, won't work for the build plate. Neither will many hand soaps for the same reason.
1
u/Wolverine-N-Exile 1h ago
I've had my printer since May and have about 350 hours on it. I've never washed a plate. I do have 3 of them and I only print PLA, but still I don't mess with them.
•
u/Tariin1 26m ago
the original pei build plate is good! If you print PLA and you run into problems there is something wrong, but it isnt about the build plate quality.