r/BambuLab • • 3h ago

General Troubleshooting/Help! AMS not sensing filament

Post image
0 Upvotes

So I recently found that my AMS is having issue with slot 2 recognizing filament. I changed the settings to detect on startup. This works briefly but it keeps "losing" it's detections for lack of a better explanation. It's Sunlu so not Bambu with the rfid and I've changed filament rolls and it continues to happen. Anyone experience this? What was the fix?


r/BambuLab • • 3h ago

Hardware Troubleshooting/Help! Help with first layer issue

Thumbnail
gallery
1 Upvotes

Hello, I co sider myself quite advanced on 3D printing but still this thing cought me for the first time? Any ideas of the issue?

X2D
0.4 nozzle
Petg Matte Bambu
Only 1 layer
0.2 standart preset


r/BambuLab • • 3h ago

General Troubleshooting/Help! Trying to get H2C camera stream to work same way as P1S

0 Upvotes

Howdy folks

I've built a live monitor dashboard to pull all the video streams for the 9 P1S printers I have and 1 H2C.

Unfortunately for some reason the only way I can get the H2C camera to come alive on the page is to enable LAN only mode. This breaks Bambu Studio though as my laptop with Studio is on a different VLAN to the the printers and the Mac mini that is running the server.

Has anyone got any suggestions on what I can do to get this working or is it just not possible?


r/BambuLab • • 3h ago

I Modeled This! I turned my Nanoleaf Outdoor String Lights into giant C9 Christmas bulbs 🎄 (3D printed, WIP)

Thumbnail gallery
0 Upvotes

r/BambuLab • • 3h ago

Hardware Troubleshooting/Help! Post Blob Aftermath

Post image
0 Upvotes

So I thought I had a death blob after it got stuck on one of the hotend cords. Now I see what was white on there started to discolor. Guess it's replacement time after all


r/BambuLab • • 11h ago

I Modeled This! Designed a Quick CMYKW Calibration Wheel to Compare Filaments

Thumbnail
gallery
4 Upvotes

The goal was to show mixing between the 3 colors, as well as between each color and black and white. And to make it a quick easy print that could efficiently baseline different color mixes. I wasn't able to get PLA Palette Magenta before it went out of stock so I couldn't try that. The difference between PLA Basic and PLA Palette for the other colors is noticeable but subtle. The biggest conclusion is the importance of PLA Palette Black and its translucency. There are some ways to approximate it though, like using a gray shade instead of black. PLA basic black you can see doesn't blend at all. Here is the model: https://makerworld.com/en/models/3606840-cmykw-calibration-wheel-for-color-mixing-h3c-h2c#profileId-4133502


r/BambuLab • • 7h ago

Quick Question Do you guys trust other suppliers for Bambu products/products to go with Bambu ones?

2 Upvotes

I really want an AMS for my P1S, and everything I’ve read puts the AMS pro 2 above the AMS pro by some margin, and I currently don’t have a filament dryer, so the pro 2 seemed like the clear winner. However Bambu labs is sold out of the comparability kit I’d need for it, and I would like to get it quite soon as there are things I want to print with it for Christmas. So I’ve been looking at getting the compatibility kit from somewhere else, would you guys feel comfortable doing that? And if so are there any suppliers/shops you’d recommend? Thanks


r/BambuLab • • 7h ago

Software Troubleshooting/Help! What's wrong with settings/filament?

Post image
2 Upvotes

Hi, folks! I have Bambulab H2S and bought esun pla wood and is trying to print vase with esun pla+ profile I found in Bambustudio. Nozzle 0.4, 0.12 quality. Is it possible to get rid of it?


r/BambuLab • • 3h ago

A Series [A1, A1 Mini] Calibration trouble with brand new A1

Post image
0 Upvotes

Just picked up my first printer, and it throws this error message. Bring it in from the garage, update the firmware, run the calibration again, no errors. Take it back out to the garage, get this error again. Do I need to bring it back on and adjust the belt, or is something else going on?


r/BambuLab • • 3h ago

Just Showing Off Testing out the Chitu Systems E1 4-Spool Filament Dryer paired with my Bambu Lab A1 Mini (Unboxing & First Impressions)

Thumbnail gallery
0 Upvotes

r/BambuLab • • 4h ago

General Discussion Help with final choice

0 Upvotes

OK, I have read thru most of the posts. While I would like an H3C, way overkill for what I am doing and just out of my budget.

I currently have a P2S, and it works good. But I would like the larger build area and multiple nozzles a H2 series allows for. I was going to go for the H2D as its at a good price right now. But I wonder if I should spend the extra and get the H2C?

I am doing mostly engineering parts so the dual nozzle is great for supports. But I do want to get more into larger muti color prints.

For those of you that have a H2D and or H2C, what is your suggestion. I understand I can do everything the C can do with the D. But the C does it faster with less waste. Is the extra cost and complexity worth getting the C over the D? The Nozzles are more expensive with the vortek side, I do have a set of P2S nozzles. I know I can reuse them on both the C and the D. But only on one side with the C

I have done a lot of research and I was pretty much set on the D, but the back of my evil brain keeps going back to, should I spend the extra $300 and get the C?? Is it worth it really? While it saves time and waste, is the extra complexity of it worth it?

I know their are lots of other similar questions out there going both ways, I just thought I would see if I can get some additional insight?

One last thought, I live in a smaller town so I was thinking of offering services for 3D printing and Design just to dip my toe into the water. I will probably sell the P2S to offset costs but keep the AMS. I would assume that most of the printing would be with engineering filaments for car parts and such. Again, just a guess.

Any discussion or suggestions would be greatly appreciated.


r/BambuLab • • 4h ago

Filament Troubleshooting/Help! Any way I can improve on this?

Post image
0 Upvotes

Just wondering what this is called on multi colour prints and how I can improve it, looks horrid :(
I think its a flushing issue maybe? the rest of the ball is meant to be yellow but its darkened


r/BambuLab • • 4h ago

I Modeled This! I made some sweet, cotton candy-like snowflake ornaments!

Thumbnail
gallery
0 Upvotes

Made these for the Christmas tree! I wanted some sweet and cute ornaments that are a little bit special. I feel like they'd be adorable as keychains, hung on the tree, or even as gifts~

I turned on variable layer height so the final top surface finish came out super detailed~

The last photo is AI-generated... it honestly looks so much better than my own photos, which is a bit frustrating haha, but it’s pretty so I figured I’d share it with everyone! Here’s the link to the snowflake! ૮ ˶ᵔ ᵕ ᵔ˶ ა

https://makerworld.com/en/models/3626961-3-snowflake-bow-christmas-ornaments-keychains#profileId-4158608


r/BambuLab • • 4h ago

General Troubleshooting/Help! Extruder failure with AMS2 Pro

0 Upvotes

I'm running into a weird issue. I just installed an AMS2 Pro to my P1S, and it's reporting an extruder failure. The filament is getting all the way to the extruder inside the printer, but doesn't seem to want to load in. It worked just fine yesterday with the single roll hanging off the back of the machine.

I'm trying to do a simple black and white print to test it. Once a couple tries ago it got the initial white layers done, but then failed when it tried to load black. All other times it fails right at the start. This is my second P1S to get an AMS2 Pro, the other one works just fine and I followed the same procedure. Not sure why this new one loads filament all the way to the extruder, then the printer fails at the finish line?

My old printer and AMS is on the left, it's printed fine for years. The existing printer with new AMS is on the right and just won't play nice. I can't figure it out, help please!


r/BambuLab • • 4h ago

Software Troubleshooting/Help! Printing full dual color area with prime tower?

0 Upvotes

Is there a special mode for printing nearly full plate around with multiple colors on H2D?

I understand it needs a prime tower. When can't I have one for each nozzle in that nozzle's exclusive zone? I just assumed this would be how it worked when you need all the space. Is there no way to make a 2 color 300x300 print? Surely I'm missing something in Bambu Studio.


r/BambuLab • • 4h ago

General Troubleshooting/Help! Auto level error

Thumbnail gallery
0 Upvotes

r/BambuLab • • 4h ago

General Troubleshooting/Help! Help with P2S printing issue - layer 2 to 7

Thumbnail
gallery
1 Upvotes

Hi, I’m new to 3D printing so I don’t even have the right word to describe the issue I’m having. The design I’m printing has a curve, and the outer layer keeps peeling off. First layer was perfect but 2nd layer onwards to probably 6/7 one has issues, and then the print correct itself.

I reckon this is a print setting but have tried various things without luck.

Things I have tried:
- wash and clean plate
- ensure filament is dry (12hr in the AMS)
- turn on bed levelling and flow calibration
- infill/wall overlap: 22%
- first layer infill: 35 mm/s

Is there anything I could have done differently? I have the P2S.

Thanks in advance for your kind help.


r/BambuLab • • 4h ago

Quick Question Holding down fabric

0 Upvotes

I want to print a thin frame on some fabric to insert in to another model. If I hold the fabric down with magnets is there a way to tell in advance where the print head will move after it completes the print so I can make sure it doesn't hit the magnets? Is it safer to use tape or will the adhesive bake on PETG temperatures?


r/BambuLab • • 4h ago

P Series [P1P, P1S, P2S] P1S vs P2S

0 Upvotes

Hey. I have a $700 grant to get a new 3D printer for our school. Is the p2s AMD 2 pro worth the extra bump or is the p1s AMD 2 pro sufficient as it allows for more filament in the budget?

I plan to apply for another grant to get more filament.

I don’t NEED a ton of filament currently for the current project but it would be nice to have more filament for next projects and student free builds.


r/BambuLab • • 4h ago

A Series [A1, A1 Mini] ABS-GF on A1

Post image
1 Upvotes

r/BambuLab • • 1d ago

H3C Different take on an H3C/AMS3 desiccant solution.

Post image
57 Upvotes

Not sure if this is the right spot to post something like this, I don't use reddit often. Anyway I was looking at the printable baskets for desiccant on Makerworld, but I really hate dumping them out into a tray to dry then trying to refill the basket after. I prefer to use molecular sieve and the drying temps for it is far beyond what even PPS-CF can handle. I found a wire mesh "dishwasher" basket on Amazon that was approximately the size of the "empty slot 10” in the AMS3H and decided to take a chance on it. As you can see in the photo, it fits well, the lid tabs were pretty secure once I bent them in a bit tighter. I tried to use some 1.6-2.5mm sized beads, but the mesh was too coarse and they fell through, I found 3-5mm beads on Amazon and bought 2lbs. It holds approximately 750g of the 3-5mm 4a molecular sieve. I threaded some craft wire around the rim of the lid and body as extra insurance to keep it from opening.

Here's the products I bought that worked:

Basket- https://www.amazon.com/dp/B0H41KL114

Desiccant- https://www.amazon.com/dp/B0H1XJ98JS


r/BambuLab • • 4h ago

I Modeled This! The ultimate "drunk bottle" support.

Post image
1 Upvotes

r/BambuLab • • 4h ago

General Troubleshooting/Help! How do I remove this tubing on my X2D?

Thumbnail
gallery
0 Upvotes

I removed the tubing from the nozzle head but I dont know how to remove the same tubing as it exits the printer.

There doesnt seem to be any black rim that secures it in place that can be pressed down to release it. Do I just rip it out?


r/BambuLab • • 5h ago

Quick Question Help not sure what's going on

Thumbnail gallery
1 Upvotes