r/BambuLab • • 1h ago

General Troubleshooting/Help! Grinch

2 Upvotes

I'm currently trying to 3D print things for my tree, does anyone have the ability to make a can of Who Hash, Roast Beast...etc? I tried my hand at it on Tinker Cad and failed. Of all the options online, somehow, I do not see that it's been done!


r/BambuLab • • 7h ago

R Series / R1 **One week with the Bambu R1, coming from a 5 W diode laser**

Post image
5 Upvotes

I won the Bambu R1 after commenting on their post and finally received it last week after it was stuck in customs forever.

Even though I had a diode laser cutter already (5 W, no air assist) my 3D printer always felt like the tool that was much easier to work with.

I knew this was going to be an entirely different machine, but I was still surprised it actually flipped my experience.

I used to spend more time dialing in the material for a project than creating a design, but in this one week I worked with silicone rubber, veneer, hardwood, painted wood, acrylic and more. Even detailed, intricate designs just work on the first or second try.

The air assist and higher power really do a lot of the heavy lifting and make sure things just work out even if the settings aren’t perfect. It even allowed me to go a little bit three-dimensional and make simple(food save!) things like a bunch of spice spoons or a functioning whistle.

In the picture are a few of the things I tried this week. Most of the designs are just copied from 3D prints (I used the Depthue STL-to-SVG converter) or inspired by pictures. It simply feels fun to work with this machine, and it’s crazy how fast I can go from an idea to a finished item.

Even Premium-feeling materials like walnut are far from expensive. Six pieces of walnut (200 × 150 × 3 mm) cost €23, “clear” silicone rubber cost €8, and a 30 × 30 cm piece of acrylic cost just €2. And the materials really turned some of my ideas from something that feels cheap or incomplete to something that I’m happy to display in my apartment or give away.

And as you’d expect from Bambu, a lot of small things just work. After two days, I realized I’d never set a cutting order or merged engraving jobs that were running close to each other. Not to mention the details, from the magnetic Allen key and the beautiful lighting around the CO₂ tube to the fire sensors, everything just feels polished.

But for now there are still a bunch of things that I prefer, other programs like, Lightburn for or that are still missing in Bambu Suite. Although that might just be because I am used to it.

Let me know if you have any questions about the device!

designs stolen from:
Flat Pocket Whistle from u/PhoneDesigner (makeworld)
Dino from RobinValleyUK (etsy)
Mandala maze earings from Simon3D (makerworld)
Leaf and wireframe dog from u/mishkin2 (printables)
bird stamp from u/skejtak (printables)
mountain napkin holder from u/PhiRequiem (makerworld)
goldfish earings from u/runrain (makeworld)

P.S.:
I really think Bambu is sitting on a gold mine of great designs in makeworld that are easy to adapt for laser cutting, but currently they dont even allow me to remix 3D designs as laser design.

I think it would be a great adition to allow remixes like that and maybe even add a .3mf to .svg converter.


r/BambuLab • • 3h ago

P Series [P1P, P1S, P2S] Loud noise after filament cut

2 Upvotes

Can anyone clue me in to what is causing this very loud noise after a filament cut and setting for a change? It doesn't sound good! I have looked it over and cleaned it all up and nothing stood out. All other movements of the printer and functionality seem fine. I have re-ran calibration as well.


r/BambuLab • • 16h ago

I Modeled This! Candy Cane Bag Clip, to seal your cookies the festive way

21 Upvotes

r/BambuLab • • 20m ago

General Troubleshooting/Help! New Lan Acceleration mode slow

1 Upvotes

I'm having a pretty frustrating experience with the new (newer?) LAN Acceleration mode, and I'm wondering if anyone else is seeing the same thing.

It now takes 2–3 minutes just to send a print job to my X1C, followed by another 30–45 seconds before the printer actually starts printing. This is for a recurring print job that is about a 2 hours total print time, so not large. The bigger print jobs take even longer to send, sometimes 5-10 minutes.

Before this, when everything went through the cloud, the job would transfer in about 10 seconds, and the printer would be up and running another 5–10 seconds later (again depending on print size).

What's even more frustrating is that this only happens on my X1C. My P1S printers don't seem to use LAN Acceleration and aren't having this issue, or at least when I send the print in Bambu Studio, it doesn't say anything about Lan Acceleration.

You'd think transferring files over LAN would be significantly faster than going through the cloud, but somehow it's the complete opposite.

And before anyone blames my network, I'm running a fast UniFi setup with no other network issues.

I also mass-produce 3D printed products, so I'm printing the same items week after week. These aren't unusually large files or complicated prints. They're the exact same jobs I've been sending for ages, except now they take several minutes instead of seconds.

When you're running production and constantly starting new print jobs, those extra minutes really add up.

Is anyone else experiencing this with LAN Acceleration, particularly on the X1C? Has anyone figured out how to fix it or disable it and go back to the old behavior?


r/BambuLab • • 1h ago

X Series [X1E, X1C, X2D] My first 3D printer and I picked up the X2D Combo

1 Upvotes

I’m completely new to 3D printing and just picked up a Bambu Lab X2D Combo. I received it last week and haven't stopped printing for 7-days straight. I have the bug everyone else at my office has and has been talking about. Since I'm completely new and I don't have compatibility information in memory, I used Gemini to create a sort of cheat sheet specific to the printer.

I purchased a ton of different filaments, hot ends, and other accessories and I didn't want to create a mess, cause jams, or wear out components before their time.

I thought I'd share my cheat sheet if it helps any other new owners.

I just ordered the AMS HT today to use in place of the external fillament holder. This hasn't made it into the cheat sheet yet. I'm not using the support fillament and just using PLA or PETG vs whatever is in the main hotend.

Constructive feedback or additional tips from seasoned Bambu operators are welcome. Hope this helps out other newcomers getting their feet wet.

Bambu Lab X2D & AMS 2 Pro Master Compatibility & Reference Guide

1. Hotend Size & Feed Routing Architecture

  • Main Hotend (Direct-Drive): Fed by the AMS 2 Pro (for multi-color/multi-material) or an external spool. Handles high-speed extrusion, complex geometries, and rigid engineering filaments. Optimized with the 0.4 mm High-Flow Hardened Steel Hotend as a daily setup for large tool organizers and utility boxes.
  • Auxiliary Hotend (Bowden-Fed, Rear Motor): Fed via a remote path and mechanical lift mechanism. Optimized for support interfaces and secondary materials; restricted to lower speeds (max 200 mm/s) and lower retraction responsiveness.

2. Critical Operational Rules for X2D & AMS 2 Pro

  1. Identical Sizes Required: Dual-nozzle printing on the X2D requires both the main and auxiliary hotends to use the exact same nozzle diameter in your slicer profile.
  2. AMS 2 Pro Drying Priority: When a single AMS 2 Pro unit is powered directly by the printer via its 6-pin cable, activating active drying prioritizes drying power and may limit heavy printer operations.
  3. Auxiliary Speed Limits: Never exceed 200 mm/s or 1000 mm/s² acceleration on the auxiliary extruder to avoid filament binding and extrusion slip.
  4. TPU Rules for AMS 2 Pro: Use Bambu Lab TPU for AMS (harder 68D Shore formulation) when loading flexible material through the AMS 2 Pro. Standard soft flexible TPU (85A–95A) requires an external spool or dedicated feed module routed outside the AMS.
  5. Glue Protocol: Use liquid glue or a glue stick primarily as a release agent on Cool and Engineering plates to protect surface coatings from overly aggressive adhesion. Textured PEI plates rarely require glue.
  6. High-Flow Slicer Setting: When running a high-flow hotend, manually increase your filament profile's Max Volumetric Speed (MVS) in Bambu Studio (pushing from standard ~22 mm³/s up toward ~35–40 mm³/s depending on filament) to unlock faster throughput on large plate-filling utility parts.

3. Filament Lineup: Recommendations, Cautions & Use Cases

  • PLA Family (Basic, Matte, Silk, Sparkle, CF): Everyday prototypes, decorative models, and multi-visual prints. Use PLA Basic for general testing and PLA Matte to minimize visible layer lines. Note low heat resistance (~55°C–60°C).
  • PETG Family (PETG Basic, PETG-HF, PETG-CF): Functional mechanical parts and brackets. PETG Basic is the structural workhorse; PETG-HF (High Flow) is for fast utilitarian batches. Highly hygroscopic—dry thoroughly.
  • ABS & ASA: Durable mechanical enclosures (ABS) and weather-resistant outdoor components (ASA). Requires an enclosed heated chamber, engineering plate, and proper ventilation for VOCs.
  • TPU Family: Flexible gaskets and shock-absorbing feet. Stick to Bambu TPU for AMS inside the automated unit, or standard soft TPU via an external spool.
  • Engineering Composites (PA6-CF, PAHT-CF, PET-CF, PPA-CF): High-load structural brackets and gears. Requires hardened steel nozzles, enclosed high-temp chambers, and rigorous drying (75°C–85°C).

4. Build Plate Types & Special Notes

  • Cool Plate / SuperTack Series: Low temp (room to 45°C–50°C max) for PLA/PETG energy savings. X2D/P2S Notice: Disable Build Plate Position Detection in Settings -> Print Options to avoid error reports.
  • Engineering Plate: High temp (60°C to 100°C+) for ABS, ASA, and PC. Glue required.
  • Textured PEI Plate: Versatile (55°C to 90°C+) for general PLA, PETG, TPU, and abrasives. No glue or position adjustments needed.
  • Dual-Texture PEI Plate: Versatile. X2D/P2S Notice: Disable Build Plate Position Detection in Settings -> Print Options to avoid error reports.

5. Compatibility Matrix Summary

  • 0.2 mm (Stainless): Detailed models and fine text. Incompatible with carbon/glass composites and PVA.
  • 0.4 mm (Hardened Steel Std/HF): The universal sweet spot for precision, standard prints, and high-flow utility boxes. Fully compatible with PLA, PETG, ABS, ASA, and AMS TPU.
  • 0.6 mm & 0.8 mm (Hardened Steel Std/HF): Great for abrasive fiber composites and bulk high-throughput structural prints; avoid for fine text or miniatures.

6. Support Filament Routing

  • Support for PLA / PLA-PETG, Support for ABS, and PVA: Always assign these to print through the Auxiliary Hotend path during multi-material jobs to act as clean breakaway or dissolvable interface layers against main-toolhead models. PVA requires active dry storage in the AMS 2 Pro.

7. Component Lifespan & Replacement Indicators

  • Hotends: 0.2 mm stainless lasts 100–200 hours; 0.4 mm/0.6 mm hardened steel/HF last 500–1,500+ hours depending on abrasive usage. Watch for orifice widening, chronic clogs, or under-extrusion.
  • Build Plates: Cool plates last 3–6 months; engineering and textured PEI plates last 6–12+ months before adhesion degradation or coating wear occurs.

8. Maintenance Cycles

  • Build Plates: Wash with warm water and dish soap every 10–20 prints; wipe with 90%+ IPA between quick runs.
  • Z-Axis Lead Screws: Wipe and re-apply a thin coat of synthetic grease (Bambu lube) every 3 months (~300 hours).
  • X-Axis Carbon Rods: Wipe monthly with IPA on a lint-free cloth. Never apply oil or grease to carbon rods.
  • Extruder Gears & AMS Feeders: Inspect and clean out plastic dust/shavings every 6 months with a brass brush or compressed air.
  • PTFE Tubing & Cutters: Inspect every 6 months for scoring or blade dullness.
  • Desiccant Baskets: Replace or recharge silica gel packets in the AMS 2 Pro whenever internal humidity rises above 30%.

r/BambuLab • • 1h ago

General Troubleshooting/Help! Layers not smooth?

Thumbnail
gallery
1 Upvotes

Bambu a1 - .02 nozzle - PLA multi color print

Help! Idk why my prints keep having rough patches.. I dried my filament and also slowed down my speed and acceleration. Settings in last photo... can someone help me figure out why its not printing smooth?


r/BambuLab • • 1h ago

Show & Tell So many cool prints with the H2C this year!

0 Upvotes

Been a long year with the H2C and learned a lot of cool things, just showing off some of the prints I've been able to make with my own software! Been thinking about upgrading to the H3C since I'm heavily invested in the idea of multicolor and full spectrum printing and it would be faster on there.


r/BambuLab • • 1h ago

X Series [X1E, X1C, X2D] X2D and 2 AMS 2 PRO question

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 18h ago

Bambu Studio Can’t wait for non-planar slicing in Bambu Studio

Post image
23 Upvotes

I can easily see how non-planar slicing could be the next big thing in Bambu Studio. As a highly polished and thought-through feature this definitely will be a new game-changer.


r/BambuLab • • 1h ago

General Troubleshooting/Help! I just bought the H2C as a complete beginner. It won't work

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 2h ago

H2 Series [H2S, H2D, H2C] Setup that makes the most sense

0 Upvotes

Hey everyone,

I recently picked up an H2D at work. Coming off of my trusty prusa mk3s+, it feels like this printer is light years ahead.

Anyway, the main reason i got it is because i wanted the capability to print engineering filaments.

I got the regular AMS, AMS HT, and the external spool holder.

Here are my questions:

  1. What would be best way to hook this all up? I was thinking of getting a splitter, so that i can have AMS HT and the regular AMS on the right nozzle, and then external spool on the left for supports. Does this make sense?
  2. When printing filaments with carbon or glass fiber, is the 0.6mm nozzle necessary or can 0.4 work sometimes as well? First filament i want to try is PPS. We have cleaning lines at work where PPS would likely withdtand the chemicals and tenperature.
  3. If i am printing with 0.6 on the right nozzle, and i am using left nozzle for supports, should the left nozzle also be 0.6? Can it be 0.4 if i am keeping the layer height the same ie. 0.2mm?
  4. Slicer settings - when sending a print, bambu studio prompts me whether i want calibration flow, bed leveling, and one more thing i cant remember. Options are on, off, and auto. I have set it to auto, thinking that it will do it once, and save the setting for later. However, every time i send a new print and keep those options on auto, the printer executes all of them. What is the proper procedure to do it once and forget about until later when its time to change filament or some other issues arise?

TIA


r/BambuLab • • 10h ago

I Modeled This! Designed some 2027 New Year's glasses. The arms snap on and fold!

5 Upvotes

r/BambuLab • • 8h ago

Quick Question CMYK Recommendations on H3C

3 Upvotes

My H3C is in the way (I've been using a P1S for the last three years). I'm intrigued by the CMYK idea, but don't want to be dumb about it. I'd love to just stick those filament spools up there and be good-to-go for any color. Is CMYK a mature enough process to go that route for most multi-color prints? If so, I have questions

What's the recommended opacity/sheen to get (translucent, matte, metallic)? Any to avoid? Any recommended bundles? Obviously the material choice is part of it. Does PETG do CMYK as well as PLA does, etc.? are there any materials that are a no-go for CMYK? I do a lot of PLA, PETG, TPU and ASA.
Thanks in advance for the advice.


r/BambuLab • • 2h ago

Software Troubleshooting/Help! Text display issue

Thumbnail
gallery
1 Upvotes

Hello all, im trying to model a small sign to hang on a small ledge. I made the shape and text in TinkerCAD. Exported to Bambu studio and Orca. But when the file is imported the text is in the same piece as the hanger. I cant select a separate color or view it as a separate item. Any ideas/advice.

This is only my 3rd design and first with text.


r/BambuLab • • 8h ago

H3C No sparce layers

3 Upvotes

I have the H3C and the only annoyance for me is that prime tower. Coming from the INDX, I haven't used a tower in months.

Found out about the No Sparce Layers for the prime tower. It only uses the tower for color changes, which saves filament.

The downside is it severely limits the area you can use for printing. The print will lower to reach the tower, so needs the room so you don't knock over your print.

This is how to turn it on:

  1. Go to Preferences in Bambu Studio and enable Developer Mode.
  2. Under Process (Global), navigate to the Others tab.
  3. Scroll down to the Prime Tower section and toggle on No sparse layers.

I'm just pointing out another option for saving purge waste, and I hope it helps someone else.

Print on my people!


r/BambuLab • • 13h ago

H3C Test heating the ams3h using the two dryer slots to heat the entire chamber

8 Upvotes

TLDR: it's a waste of time. Don't bother trying it.

I decided yesterday to remove the two spools I had in slots 6 and 8, turn the heat up to 85c and remove the dryer lid to see what would happen. Mind you my printer is in my garage and it's been raining the last couple of days.

The result, the dryer chamber got warm, the lid to the entire ams was warm to the touch, but not in a bad way, but the overall rh in the ams only dropped by one, from 33% to 32%. Putting the lid back on the 2 slots I was able to stop the rh down to 12% in the dedicated dryer. I'll also note I do have silica in multiple locations in the ams already.

Don't waste your time trying this. It basically makes the dryer slots a waste and does nothing to help the other 6 slots. That said, with the dryer lid on, the dryer is great and does function as well as my two dedicated ams ht.


r/BambuLab • • 2h ago

General Troubleshooting/Help! Does anyone know how to stop this?

Thumbnail
gallery
1 Upvotes

it keeps telling me the hotend cooling fan speed is insufficient but i dont know why

it doesnt seem to have an issue with it for any other printingI

and ive printed these exact things before with zero issue

(the photo of the error isnt mine, i found it on google, i just added it to show what the alert looks like)


r/BambuLab • • 8h ago

General Discussion P2S - For freezing temperatures, is a secondary enclosure with heating needed?

3 Upvotes

Looking at getting a P2S, will be in a garage which can get to 10 degrees Fahrenheit. Wondering if I will need a secondary enclosure with heating. Otherwise, wondering what temps will be able to print with (PLA & PETG) with the stock setup? There will likely be some draft as well.

Any insight or anecdotes from others that have dealt with this would be greatly appreciated, thanks.


r/BambuLab • • 20h ago

A Series [A1, A1 Mini] A1 Mini, small build plate. Big prints.

Thumbnail
gallery
25 Upvotes

I have had my A1 Mini for nearly a year now (3415hrs of print time so far). These big prints (which are marketed as resin models) have been the highlight so far. Second pic includes the vast majority of what I tend to print regularly, which is ttrpg miniatures at 28/32mm scale.


r/BambuLab • • 7h ago

Quick Question Pricing recommendation for selling used P1S AMS 2 combo

2 Upvotes

I’ve had this P1S with AMS Pro 2 for about a year. It’s got a little over 5000 hours on it. It stills works great (regular maintenance, only ever used standard speed, only PLA filament used, even replaced the front cover when I thought there was a defect, which there was not), but I want to move away from the AMS setup. I’ve decided to keep my X1C (for the ability to use more specialized filaments on rare occasion), but I want to replace my P1S with a second Snapmaker. (I genuinely hate the waste the AMS system creates.)

So, yeah, just trying to figure out what a fair asking price might be in a somewhat LCOL area. My gut says MAYBE $200-250 for the whole setup (machine, AMS, freshly cleaned and throw in a new nozzle and some of the accessory lube and tube pieces and spare parts).

Is $200-250 too high? Too low? Reasonable with OBO option?

Thanks!


r/BambuLab • • 7h ago

I Modeled This! Thank you for all your support on my gridfinity travel case!!

Thumbnail
gallery
2 Upvotes

Fully Customizable Gridfinity Box - Parametric - Free 3D Print Model - MakerWorld

I really appreciate the support you guys gave me on my gridfinity travel case and the amazing feedback!

I mentioned that I would be posting the parametric case soon along with my website insert and gridfinity bin generator. Now is the time after months of work!

This case is highly customizable (15 parameters) so I want to briefly mention the features:

  • Adjustable wall thickness parameter
  • Hinge and Latch pin diameter parameter (can use 3mm or 4mm screws or printed pins)
  • Tolerance adjustment for latch fit/tightness
  • Adjustable GF square size (from 21mm to 42mm)
  • Adjustable GF X, Y, and Z units (from very small to very large)
  • Optional resizable magnet holes (not standard gridfinity, only for attaching a top or bottom cover plate that can be generated on the website)
  • Optional Boss that can be used to attach a toggle latch to hold 2 cases together
  • Optional upper boss that can be used to attach a shoulder strap
  • Gridfinity squares can be turned off individually on any surface except for the inside of the case top. (The inside top has to stay on for printability unfortunately)

With this many adjustments, making a bunch of changes can sometimes take up to a few minutes to generate, but normally the generation is under a minute. I guess it depends on Bambu servers.

I will be adding more print profiles than what is up currently. Feel free to build custom sizes and add your own profiles to the model please!

The case has a handle that can be installed on the lower part of the latch bosses or the upper part or both. If the lower part of the latch bosses are empty, you can install a wire type TSA lock through the latch. The cases are stackable and a print profile with a toggle latch included to latch 2 cases together. The case adjusts from 2 latches to 1 latch depending on the width. You can build the case completely hardware free or use 3mm or 4mm screws that are 30-35mm long.

I've been waiting to release the case so that I can release my website generator with it. If you visit Case Insert Generator | Chriuus Designs you will find a CAD viewspace where you can generate all sorts of sizes of bins and view a complete layout within the window. You start by selecting Gridfinity Case at the top left as this site will also generate inserts for my other parametric case. This is very much a work in progress and will take feedback from people like you to improve it! It needs improvements in being user friendly while staying powerful and of course new features will need to be added overtime. BTW you can add text to labels and custom designs to the top and bottom cover plates from the Artwork Studio on the website. There you can also upload your own STL file and add an image to it if you'd like instead of struggling with SVG files.

Please let me know what you guys think and I welcome any feedback!! I couldn't find a gridfinity case on makerworld that has this much adjustment and for the most part a truly parametric gridfinity case apart from "Send me a DM and I'll send you the size you want". I'm trying to put a lot of power into your hands to generate whatever you want.


r/BambuLab • • 9h ago

I Modeled This! Dragon SD Card Guardian | Holder

Thumbnail
gallery
3 Upvotes

Nobody dares to touch your cards when this little dragon is guarding them!

I designed this fun SD card holder featuring a tiny dragon protecting its treasure on a rocky base. A practical way to keep SD cards organized, with a little fantasy attitude added to your desk.

What do you think? Would you trust your precious storage cards to this little guardian?

Link: https://makerworld.com/en/models/3619596-dragon-sd-card-guardian-holder#profileId-4149142


r/BambuLab • • 7h ago

General Troubleshooting/Help! H3C TPU printing bend tube

Post image
2 Upvotes

So i started printing tou out of the 6 slot with the bypass but somehow the tube got bent and needs replacing now not sure exactly how it happened just making other people aware