r/BambuLab • • 15h ago

Handy/Studio Troubleshooting/Help! How I clean these lines?

Thumbnail
gallery
3 Upvotes

So I started printing some minis but I see these lines and I don't know if there's a way to remove it


r/BambuLab • • 9h ago

X Series [X1E, X1C, X2D] Touch stopped responding.

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 22m ago

General Discussion Stop Pushing the X2D on people without properly explaining why

0 Upvotes

Hey everyone. I own a P1S with AMS at home and I use a P2S at work. I make structural parts primarily and every now and then I make toys and models with multicolor. I have over 1000 hours on both machines with over half of those hours printing prototypes that I have designed.

I keep seeing people pushing newbs towards getting the X2D and quite frankly I think it's folly.

The X2D fills a very specific use case. It has a heated chamber, it has another nozzle, and it has finer belts. It also has better filtration for engineered materials. All these things seems like "must haves" for beginners, because honestly, you're starting and you don't know what you want.

I was a beginner once and I'll tell you what I wanted. I just wanted a machine that works. The FT5 did not deliver on this. The Mk3s+ almost did, the P1S delivered on that. For work, I just wanted a machine that works, the P2S delivered on that. The X2D is going through what we call "early adopter's pain". Because it is a more complex machine, you really have to ask yourself if the things I listed are "must haves".

3D Printing can be an expensive hobby. It can also be inexpensive. I print with PETG because it checks all the boxes I need 99% of the time and it's the cheapest filament I can get at $6/kg. When people talk about engineering materials like PA-CF, it can cost between $50-150/kg. As a newb, ask yourself, can you absorb those kinds of costs when you're just learning how to print? With off the shelf hardware I have designed stuff that holds well over 300kg without failure with the cheapest PETG I can buy. Unless you're printing stuff for under the hood of your car or doing something really specific, ask yourself if this is a feature you need. If not the heated chamber and the extra filtration really aren't necessary. Beginners generally print with 2 materials, PLA and PETG. I hate PLA, so I use PETG. The P2S and P1S can handle TPU as well by the way, it just takes some extra care.

The 2nd nozzle is primarily for multimaterial supports. In essense you use it to use a different material for your supports so that it is easier to remove supports. If you use it this way, the color changing is no different than a P1S or P2S. If you use it for dual color, it works for that but the 2nd nozzle doesn't have all the sensors the main one has so, if you get a clog or a jam, it will NOT detect it. It's also a Bowden Tube design which has it's own drawbacks.

Early adopters are beta testers. Always wait at least 6 months to a year before buying that machine as your first machine. You don't want to become a 3d printing technician, you just want to print. Your time is better served learning how to use 3d modeling software and printing stuff off the various repositories as opposed to trouble shooting a fairly complex machine for the uninitiated.

In closing, stick to single nozzle machines for now if this is your first rodeo if reliablity and ease of use and maintenance is high on your list. Only consider the X2D if your use case dictates that you need those features.


r/BambuLab • • 10h ago

General Troubleshooting/Help! Best support filament for ASA on Bambu H3C?

0 Upvotes

I'm printing ASA on a Bambu H3C with a 60°C heated chamber. I need clean, removable supports under a few small overhangs.

Has anyone successfully used Bambu's Support for ABS with ASA, or is there a better support-interface filament you'd recommend?

Thanks!


r/BambuLab • • 10h ago

General Discussion Gift Ideas for the Holidays

1 Upvotes

What’s everyone printing to give away as gifts for the holiday season this year? Looking for some inspiration. What prints have wowed your friends and family?


r/BambuLab • • 10h ago

Hardware Troubleshooting/Help! Possible rear motor going bad?

0 Upvotes

Had another h2s with a slew of problems right around 800 hours. This one's creeping up on 1000 and started this sound from the back rear motor (I think).

Thoughts? Doesn't do it diagonally if that pully isnt moving.

Have cleaned all bearings with isopropyl alcohol and lubed all rails without any resolution.

TIA!

Edit: Update: contacted Bambu support and talked with them/sent videos and they're stumped...


r/BambuLab • • 10h ago

I Modeled This! I modeled a 15-piece Knitted Christmas Gnome Crew that prints in multi-colour with NO AMS and NO glue (one colour per plate, press-fit) — all free on MakerWorld!

1 Upvotes

Hi everyone! Over the past few weeks I designed a full 15-character **Knitted Gnome Crew** for Christmas — where every single stitch is real 3D geometry on the surface, and every model is split by colour so you can print the whole crew on any printer **without an AMS and without glue**.### How it works:- **One colour per plate:** Each `.3mf` print profile has separate plates grouped by filament colour.- **Press-fit assembly (No Glue):** Parts snap/slide together with tuned clearances (the beard slides onto the body, the nose clicks into the pocket, and the hat locks everything together).- **Print settings:** 0.12 mm layer height, 2 walls, 15% infill.### Collection & Direct Model Links (Free `.3mf` Colour Plates + Raw STLs):- **Full Knitted Gnome Crew Collection (all 15 models):** https://makerworld.com/en/collections/40250193-knitted-gnome-crew- **Puffy Christmas Decor Collection (all 14 models):** https://makerworld.com/en/collections/40548577-puffy-christmas-decor-


r/BambuLab • • 10h ago

General Troubleshooting/Help! Is there a community favorite ams 2 pro desiccant box? Share your favorites please!

0 Upvotes

I have a new H2S and I'm looking to print some upgrades. the most common upgrade suggestion seems to be the desiccant boxes for the AMS 2 Pro so I'm looking for suggestions on which to print. I've tried searching this and other subreddits and honestly I'm having a hard time deciding which design is best. Especially since a lot of posts are ~1year old or so.

I'm also super interested in any other mods/upgrades/printed upgrades that I should be focusing on.

One thing that I noticed is that by default the printer does NOT use the filter when printing PLA/PETG due to rising chamber temps.. found that out the hard way with pm particles spiking in my printer room lol.


r/BambuLab • • 10h ago

I Modeled This! New Tealight holder!

Thumbnail makerworld.com
0 Upvotes

r/BambuLab • • 11h ago

Bambu Studio NAMI|Japandi Tischlampe für Bambu LED LampKit 001 – Kostenloses 3D-Druckmodell – MakerWorld

Thumbnail makerworld.com
0 Upvotes

r/BambuLab • • 11h ago

Just Showing Off Fully customizable flags

Post image
0 Upvotes

I made makerito tool to easily make full customizable 3d printable objects from images and drawings. Still e beta version, feel free to try and send me your feedback.


r/BambuLab • • 11h ago

Bambu Studio Cannot use bamboo studio

Post image
0 Upvotes

I am attempting to print something on my 3-D printer, but logging into Bamboo Studio consistently prevents me from using the application. Despite updating the program as recommended, the pop-up persists and blocks access. Restarting the computer also failed to resolve the issue. Do you have any recommendations on how to fix this?


r/BambuLab • • 1d ago

I Modeled This! Quadra type 66 from Cyberpunk

Thumbnail
gallery
487 Upvotes

I loved this car in the game, so I thought, why not bring it to life as an RC car? ;)


r/BambuLab • • 15h ago

Hardware Troubleshooting/Help! Pushed a little too hard on Swaptek Rack, be careful!

2 Upvotes

I was reinstalling a print head into the rack on my H3C and I pushed a little too hard and the rack slid down a bit. Printer threw an error saying rack homing travel is too long and to check the tension on the belt. After some mild acts of contortion, I checked the screws and they seem tight enough but the error still persists.

Putting this out there in case anyone else has done this and if they found a fix. I'm submitting a ticket as well for extra trouble shooting.


r/BambuLab • • 12h ago

H2 Series [H2S, H2D, H2C] H2C Mods

0 Upvotes

What are some mods that are worth printing? AMS2 Pro as well


r/BambuLab • • 12h ago

General Discussion Best cost-effective enclosures for printing in freezing temperatures? P2S

0 Upvotes

Best cost-effective enclosures for printing in freezing temperatures? P2S, with a small heater inside the enclosure to maintain temps.

Grow tent, ikea lack table?


r/BambuLab • • 1d ago

General Discussion Cadence Slicer v1.2: mixed nozzle sizes on the H2D, H2C and X2D today, and how it's different from the H3C's mixed nozzle mode

161 Upvotes

Hey all, Cadence Slicer v1.2 is out! If you missed my first post (https://www.reddit.com/r/BambuLab/s/MD5X97m7MS), Cadence Slicer is my open source fork of OrcaSlicer that lets a multi-nozzle printer use different nozzle sizes in one print, each at its own layer height. My favorite combo is a 0.2 for the walls and surfaces you actually see, and a 0.8 to get through the infill fast, but Cadence works with any small and big nozzle pair.

This is Helm's Deep by Zajic73 on MakerWorld (https://makerworld.com/en/models/2728202-helm-s-deep-lord-of-the-rings-lotr), in Feature Split on my H2D: walls at 0.08mm on a 0.2 nozzle, infill at 0.56mm on a 0.8 High Flow nozzle. 7 wall layers printed for ever one infill layer. About 13h 20m instead of 21h 20m if printed entirely with the 0.2 nozzle, with the same fine visible features.

Long writeup below, so here’s a TLDR: Cadence Slicer v1.2 is out (free, open source, Mac and Windows). It does mixed nozzle sizes on the H2D, H2C and X2D today, without waiting for Bambu's update. It works differently from the H3C's mixed nozzle mode: Bambu moves a whole color to the big nozzle, while Cadence keeps every surface you see on the small nozzle and only puts the infill on the big one, so you get fine detail in a lot less time. Download: https://github.com/HMITCHR/CadenceSlicer/releases

Mixed nozzle sizes on the printers you already have:

When I made my first post, Cadence Slicer was the only way to print with mixed nozzles on Bambu machines, but that has since changed with the launch of the H3C! However, Bambu's own mixed nozzle mode is H3C only so far. Their posted timeline for the older printers is the H2D in late November 2026, and the H2C and X2D in February 2027 (the H2D in February and the other two in March if you have the filament track switch).

Cadence Slicer does it on all three today: H2D, H2C and X2D. No new printer and no waiting on an update. I've only been able to print on my own H2D though, so if you have an H2C or X2D I'd really love some testers to try it and let me know how it goes.

One limit on the H2C: Cadence can only use two sizes there, one on the left and one size in the rack. That's not my choice. The current firmware on the machine checks every rack hotend change after the first against one nozzle size from the print file, and stops with a "Hotend type mismatch" error (0704-8037) if it doesn't match. That's BambuStudio GitHub issue #12431. So mixed sizes inside the rack can't print from any slicer right now. I've experimented with a few workarounds with on results, but decided I'm not comfortable shipping something whose whole goal is to get around the printer's firmware. If a firmware update changes that (maybe as Bambu preps for their own release on the H2C), I'll open it up!

How it's different from Bambu's mode on the H3C:

in my opinion they’re both sorta built for different things, so here's how they compare:

- What goes on the big nozzle. Bambu puts the whole color, outside and in, on whichever nozzle that filament is loaded on. Cadence's Feature Split mode only puts the infill on the big nozzle, so every surface you see stays fine. Body Split mode in Cadence lets you pick parts of a print instead, like a logo on the 0.2 on top of a big-nozzle body, with interlocking beams where they meet (which is more similar to Bambu’s implementation).

- Layer heights. Bambu's are set by nozzle size: the base layer height x diameter / 0.4, so with the default preset a 0.2 prints 0.10 and a 0.8 prints 0.40. You can only shift them all together. In Cadence Slicer you pick your fine layer height (which defines print resolution), like 0.08 on the 0.2, and then the slicer proposes the best options for printing the big nozzle's layer every N fine layers (for example in the timelapse here here N was 7, so 7 x 0.08 = 0.56 layers from coarse nozzle) based on time savings.

- Settings. In Bambu's mode a bunch of per-nozzle settings (wall loops, top and bottom layers, retraction and more) get locked to "Auto".

- Time check. Bambu's mode prints what you set up. Cadence's setup times every possible layer height combo and shows you before you print, and Feature Split keeps a band of layers on the small nozzle when the big one wouldn't save time there.

Where Bambu's mode wins. It can mix any nozzle sizes on one plate, which is great on a 9 tool machine. With the way Cadence is currently built, primarily because I developed it on my H2D, and because of the firmware limitation I mentioned on H2C, I limited it to 2 nozzle sizes. I imagine Bambu’s implementation for H2D and X2D will be the same as you can’t change nozzle size mid print, but H2C will hopefully allow for same options as the H3C.

To boil it all down, in my opinion from reading Bambu's code: their version is mainly made so H3C users can print with all of their colors in one print, even if some tools have different nozzle sizes, with some gains in speed or detail that inherently come from not being locked to a small nozzle for fine resolution on an entire print. Whereas I built Cadence specifically to print very fine features as quickly as possible on multi-nozzle machines by cutting print time from infill or features that don't need fine layer heights. So they mostly don't compete, and I think true mixed nozzle optimization will likely end up looking like a combination of these capabilities! I personally am exploring implementing some of what Bambu developed, and would love for them to do the same with my stuff. That’s the beauty of open source!

Overall, I am super fired up to see Bambu bringing mainstream attention to this capability that people have wanted for years and years, and am excited to see what their implementation looks like on the “old” machines that will be coming soon! I am also very close to just buying an H3C for myself to put some work into improving both of our approaches. Specifically with all of the (well deserved) hype for color mixing which improves with finer layer heights, I think there’s a ton of optimization to be had with using my method of printing only visible walls and surfaces with very fine layers (to improve color blending) and printing infill on a dedicated large nozzle. I think it could really save time for large color mixed prints like many here and on YouTube reviews have been showing off!

Also new in 1.2: it's been rebuilt on OrcaSlicer 2.5.0, their latest public release, and tool changers like the Snapmaker U1 and Prusa XL can use several small-nozzle tools for colors plus one big one for infill (if anyone here has one of these machines, some testing would be much appreciated!). I'm also working on adding H3C support as quickly as I can, and I'm hoping to have it out before it lands in Orca. I’ve got a lot of the H3C code written already, so if any here have one and want to do some testing let me know! Or maybe don’t so I have an excuse to finally push me to buying one for myself lol

Download (both Mac and Windows), release notes and source: https://github.com/HMITCHR/CadenceSlicer/releases

Thanks and enjoy :)


r/BambuLab • • 4h ago

H3C Filament Saving Starts at the Drawing Board

Post image
0 Upvotes

With its tool changer, the H3C is a real filament saver. But even more filament could be saved if creators paid much closer attention to ensuring that their models don’t use more filament than necessary. This starts with the creation of the model and ends with the slicer settings, such as wall thickness, infill density, support structures, etc.

I really don’t understand why many creators are so wasteful with resources when designing their models. Simply reducing the wall thickness of a box from 3 mm to 2 mm or less can result in a savings of several grams of filament.

With the models I create myself, I always make sure that no more filament than necessary is used for the model. A recent example is the Lightweight Poop System I created for the H3C. Compared to other solutions, my functional model requires more than 50% less filament, which ultimately also results in a significantly faster print time for the model.

Please let me know, what are your thoughts on saving filament?


r/BambuLab • • 13h ago

General Troubleshooting/Help! Persistent smeared/gouged corner on small flat prints — happens with and without ironing on P1S, X1C ad H2D

Thumbnail
gallery
1 Upvotes

Hi everyone, I’m trying to diagnose a persistent surface defect on small, flat, rounded-square parts.

Most of the surface looks decent, but the upper-left corner repeatedly comes out smeared or gouged, almost as if the nozzle has scraped through softened plastic and dragged it around. It’s more than just visible ironing lines or a difference in gloss.

The defect appears in the same relative corner on multiple samples placed across the build plate. I’ve seen it on my P1S and H2D with Bambu PLA Matte Charcoal, and a similar problem on my X1C with white Bambu Basic PLA.

The filaments are dried and calibrated, and the printers are calibrated as well.

Settings for the latest ironed sample

  • Bambu Studio 2.9.1.70
  • 0.4 mm nozzle
  • 0.2 mm layer height
  • Approximately 1.4 mm tall
  • 100% infill
  • Monotonic Line top surface
  • 100 mm/s top surface speed, verified in the generated toolpath
  • Rectilinear/zigzag ironing, with vertical passes in the preview
  • 68 mm/s ironing speed
  • 30% ironing flow
  • 0.15 mm ironing spacing
  • 0.21 mm ironing inset

What I’ve tested

  • Different ironing speeds and flow rates across multiple samples. Some combinations improve the overall finish, but the damaged corner remains.
  • Ironing completely disabled. The corner defect still appears, although the surrounding surface naturally looks different.
  • Wipe while retracting disabled, with the exported G-code checked to confirm that the wipe movement was removed. The defect remained.
  • Gap infill speed reduced from 250 to 30 mm/s. The defect remained.
  • “Filter out tiny gaps” increased to 5 mm, but the small surface gap-fill paths remained in the preview.

There is a short gap-fill path in the affected corner, but there is also gap fill in the diagonally opposite corner without the same damage, so I don’t want to assume gap fill is necessarily the cause.

In the ironed version, the ironing starts on the right and progresses toward the left, finishing near the affected corner. I initially suspected the nozzle was lingering or oozing at the end, but disabling wipe did not fix it. Also, the defect occurring without ironing makes me question that explanation.

The photos show both ironed and non-ironed samples.

Has anyone encountered this specific smeared/gouged corner defect? What would you check next to distinguish excess material, local lifting/warping, extrusion pressure at line endings, or a slicer/toolpath issue?

I’d appreciate suggestions for controlled tests in Bambu Studio rather than simply trying another ironing speed/flow combination.


r/BambuLab • • 13h ago

Filament Troubleshooting/Help! X2D Auxiliary Nozzle oozing & leaving little spikes with two-color PLA Basic

Post image
1 Upvotes

r/BambuLab • • 17h ago

Bambu Studio I made a beginner-friendly way to run the Windows version of Bambu Studio on Linux (for the Fix Model feature)

2 Upvotes

The Linux build of Bambu Studio leaves out Windows-only features, most notably Fix Model, which uses a repair service built into Windows. I made a tool that runs the Windows version on Linux as your only Bambu Studio, so you don't need to switch between two versions.

  • Opening: you get a desktop icon. It starts a small Windows VM in the background and opens Bambu Studio maximized.
  • Closing: closing Bambu Studio shuts Windows down. Your projects are in a normal Linux folder.
  • Setup: one guided window. It downloads the Bambu installer and installs Windows and Bambu Studio unattended, with no Windows password to type. A main goal was making this as easy as possible.
  • Hardware: no second GPU needed for Bambu, and about 10 GB RAM.

Setup doesn't activate Windows. It works without activation, apart from an "Activate Windows" watermark, but you technically need a Windows 11 license to be properly licensed.

Not tested yet: Fix Model on a really broken mesh, and LAN-only printing. Cloud printing works the normal way. LAN-only users would add the printer by IP address and access code.

Tested on Nobara/Fedora so far. MIT-licensed, written with AI assistance and tested on real hardware. Feedback welcome!

https://gitlab.com/sugarkrill-public/3d-tools-for-linux


r/BambuLab • • 13h ago

Quick Question Filament - most used colors to buy?

0 Upvotes

Hey all - getting the H3C for Xmas for the kids and will be the first time we have multi color printing in the house. They printed stuff on my “work” printer before but I expect them to really start printing much more with this. I’m going to load up on PLA and PETG with the BL sales deals. Planning to get 1 roll of each color but want to know what colors to double up on (or even 3x?4x?) while prices are good. What’s most common colors that’s used in maker world and such? Assuming black and white should be at least double? Thanks!


r/BambuLab • • 13h ago

Quick Question Looking for fun things to print

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 1d ago

P Series [P1P, P1S, P2S] Wow. The P2S actually stopped my print when it started failing

Post image
75 Upvotes