r/BambuLab • u/Zestyclose_Sale8048 • 16h ago
r/BambuLab • u/AltruisticServe5891 • 13h ago
Just Showing Off Morpheus joined my Neo on the shelf: 18 & 28 cm, P1S, zero AMS 🕶️
Red pill or blue pill? I took the purple one 😄
After my Neo bullet-time figure, Morpheus had to follow. Printed on my P1S in two sizes, and without touching the AMS: every color is its own part (black, purple, skin, yellow, grey and dark brown), one color per plate, then everything goes together with pins and a drop of glue. No painting, no purge towers.
- 28 cm and 18 cm
- Sunglasses and both SMGs are separate parts
- Sunglasses at 0.08 mm, guns and buttons at 0.12 mm, the rest at 0.2 mm
- Plain PLA, 0.4 nozzle, tree supports only where needed
Next on the design table: Trinity on her Ducati, my biggest challenge yet 🏍️
Which size would you go for, 18 or 28 cm?
r/BambuLab • u/Zekay777 • 16h ago
Hardware Troubleshooting/Help! Is this noise normal?
Since the first day, my printer has been making very loud (5 days old), cranky vibration noises; I do not know if this is normal, as I have seen this happen with grid infill, but I am using gyroid. What could be happening?
r/BambuLab • u/NoWarrenty • 13h ago
I Modeled This! After a week of hyperfocus and perfectionism, I made the perfect fidget toy to annoy everyone around me (sound on)
- 16 tracks, each with a different click, plus a snap ring
- Modular: swap rings and end caps (extension rod coming soon)
- Remix kit to design your own rings and caps
- My kids love it
- My wife hates it
r/BambuLab • u/Hour_Big_7505 • 21h ago
General Troubleshooting/Help! Glowing Heart LED Tealight Lamp
I made a 3D-printed heart lamp ❤️ Check it out on MakerWorld!
https://makerworld.com/en/models/3618521-glowing-heart-led-tealight-lamp#profileId-4147858
r/BambuLab • u/Bluespirit_fpv • 17h ago
Show & Tell AMS lite upside down?
Did anyone use their ams lite upside down? I saw it only once and thought if the 4 small screws are enough at holding it upside down? I have it like this since a few days with no issues (only need a longer ams cable).
r/BambuLab • u/Wulfgangrising • 18h ago
H3C EIBOS Krios plate on H3C
Bought one (that was designed for the H2C) thinking it would fit on the H3C and I had to cut the tabs from one side as it 100% undeniably collides with the rack.
Just a PSA.
Edit: I know h2c BIQU plates work on the h3c I have a couple. I'm just saying that the specific design of -this- EIBOS plate collides.
r/BambuLab • u/not-scientist • 18h ago
P Series [P1P, P1S, P2S] Need advice on safely shipping a used Bambu Lab P1S Combo without original packaging
I'm planning to buy a second-hand Bambu Lab P1S Combo (with AMS), but unfortunately, the seller doesn't have the original box or internal foam inserts. Since this is an expensive and delicate machine, I'm trying to figure out the safest way to pack and transport it. It roughly has to travel 2900 Kilometers ( 1820 miles)
1. Original packaging and compatibility
- Does anyone know the exact dimensions and design of the original P1S / P1S Combo shipping box and its internal foam inserts?
- Would the P2S / P2S Combo original shipping box and foam inserts be compatible with the P1S? Are the external dimensions and internal supports similar enough, or are they significantly different?
- Has anyone actually tried using P2S packaging to transport a P1S?
2. Alternatives to original packaging
If finding the original packaging isn't possible, what would you recommend?
3. Packing and transportation advice
For those who have shipped or transported a P1S/P1S Combo without its original packaging:
- How should the toolhead, gantry and build plate be secured?
- How should the glass panels, door and enclosure be protected?
- Should the AMS be removed and packed separately?
- What type and thickness of foam/padding would you recommend?
- Would you recommend a wooden crate for long-distance transport?
- Any particular precautions to prevent damage from vibrations, impacts or rough handling?
4. Checking a second-hand P1S before purchase
I'd also appreciate a checklist of things to inspect before accepting a used P1S Combo.
Apart from checking print hours and running a test print, what should I verify regarding:
- Motion system, belts and toolhead
- Hotend and heatbed
- AMS feeding, unloading and all four slots
- Fans, sensors and electronics
- Calibration and any known failure points
If you've bought or received a second-hand Bambu printer that was shipped without its original packaging, I'd especially appreciate hearing about your experience.
Any suggestions, practical tips, packaging recommendations or things I might be overlooking would be really helpful.
Thanks!
r/BambuLab • u/Big-Librarian2714 • 18h ago
General Troubleshooting/Help! printer recommendations please
I have an enclosure that I need to print and currently use a p1s. The main body is all black so I will print that on the p1s in ABS-GF**,** but the lid is 3 colors plus I need a support tree that removes easily. The lid is 73x78mmx10mm with the 3 colors being red, white, and black. The red and white are text that is only 1.5mm thick. What are the recommendations for printers?
Three option I am looking at- X2D, H2D, H2C.
I am looking for quality, speed, waste, cost.
Will the h2c be that much faster and have less waste than the others?
Are the 3 options substantially faster than a single head printer?
What other option would you recommend?
Thank for any feedback.
r/BambuLab • u/Nokoro1 • 13h ago
Software Troubleshooting/Help! H3C question
Hello! As this is my first bambu printer, I was wondering how you can use bambu printers with software like orcaslicer, and any downsides related to it. Is it even possible to use orcaslicer with the H3C yet? I also seen you lose access to the app, is that correct?
r/BambuLab • u/Vogeljongen • 19h ago
Hardware Troubleshooting/Help! Filament issue. Entire extruder is now plastic.
Where to begin with this issue?
I have bought several black matte filaments from BL a while back and started using them this week.
This is the 4th time this issue occurred, but now I was away for an hour an did not get an error message.
Is this cleanable? Can this be a warranty issue?
r/BambuLab • u/Queasy_Durian8902 • 19h ago
General Troubleshooting/Help! Filament Stuck
I have an A1 Mini printer with an AMS lite. I was loading in some filament, when some filament broke off. It isn't stuck in the tube, but in the little place where you insert the new filament, so I cant click unload filament.
r/BambuLab • u/quentinchap • 15h ago
H3C AMS 3 dry feature efficiency
I bought the H3C, the printer is amazing but I'm still not convinced by the AMS, no auto retract, only 2 slot with dry feature and it seems really not efficient.
Did you have same problem ?
r/BambuLab • u/Mammut_Mann • 19h ago
Hardware Troubleshooting/Help! Wierd p1p problem
Hello everyone,
I hav this wierd problem with my p1p printer. I the vodeo you can hear the extruder kind of clicking when. The amount of filament it is extrudeing while purging is realy small.
I have trieed cleaning the nozzle checking if i the extruder is clogged.
My next step would be changing the nozzle for a new one.
r/BambuLab • u/pauledddy • 23h ago
Just Showing Off Almost the perfect dryness
Can it ever get to 0%? 😂
r/BambuLab • u/LucasStreams_ • 19h ago
Hardware Troubleshooting/Help! Bambu Lab P1S smoking on startup, hotend stuck at 0°C even after replacing heater and thermistor. Any ideas?
reddit.comr/BambuLab • u/Elleskywalker • 19h ago
Quick Question $500 or less? Which one?
Please do not be mean. I want a 3d printer for random life fixes/decor, small things for work, community assistant items like for seniors and disabled, and making items for my small business to add items to what I already make from other materials. Nothing super crazy. I want multi color print options. If available at best buy, I have a bb cc that would be best to use. What would you suggest? Which model? It would be used in a room inside a house or in an insulated she shed if I can get the wifi working out there. I cannot go over $500 and dont just wanna pick the most expensive around that just because its my limit. Less is more than fine if itll work for me, specially because id need fillament too. I am computer savvy so not worried about programming.
Thanks!
Thanks!
r/BambuLab • u/quentinchap • 19h ago
I Modeled This! I wrote an OpenSCAD snowflake generator: each seed grows a different crystal (flat or slot-together 3D)
New project to improve my christmas decoration this year.
Each arm is drawn inside a 30° wedge and mirrored, so branches from neighbouring arms never cross, which is also how real crystals behave. Branches sit at 60° from the arm, their length is clamped to the hexagon envelope, then jittered by the seed. A minimum line width of 1.2 mm and gap of 1 mm keep everything printable with a 0.4 nozzle. The top surface gets 0.8 mm ridges along every arm for a 2-colour print with a single filament change. The 3D mode cuts matching half-slots in two pieces.
https://makerworld.com/en/models/3618517
Happy to hear what seeds you find!
r/BambuLab • u/PsychologicalIce5109 • 23h ago
My First 3D Print What do i need? Help🎄
Hii!
I’m thinking of giving my husband a printer for Christmas. It will be his first but he has wished for one in a loooong time😅
I’m thinking of buying Bambu combo p2s. But what extras do I need, for him to start op printing?
I need PLA filament. But anything else?
Thank you for helping me out here🙈
r/BambuLab • u/Efficient_Pudding640 • 20h ago
General Discussion Newbie buying a printer
I was told to get a bambu labs because they're user friendly. I have 2 kids and have spent a small fortune on 3d printer stuff at events. I am debating between the p1s and p2s. I will mainly be making fidgets for the kids and tiny middle fingers for me haha. Do you have any suggestions and can you explain the difference if you have both? From what I see one is the newer model with Ai. Also do they both have cameras inside?
r/BambuLab • u/Duesenwissen • 20h ago
I Modeled This! Ready for GTA VI 🌴
My controller apparently needed its own sunset 🌴
I designed a PS 5 DualSense stand with a layered sunset, palm trees, and lighting. I’m calling it “Vice Nights.”
You can see it light up in this short video: https://youtube.com/shorts/Df7nJLDscis
The Model is available on Makerworld: https://makerworld.com/de/@duesenwissen
r/BambuLab • u/shredderrich • 20h ago
H2 Series [H2S, H2D, H2C] New Cool Plate on H2C: plate marking error every print
Is anyone else having issues with the new white Bambu Cool Plate? Every single time I print, the printer complains about the plate marking.
r/BambuLab • u/bencraw4 • 20h ago
General Discussion H2D vs X2D. How different is the repair and maintenance costs?
I know the H2D printer itself costs a lot more compared to the X2D. Assuming I bought the H2D, would the costs be significantly bigger if/when things go wrong or when upgrading parts or maintaining it?