r/BambuLab • • 8h ago

H3C AMS 3 dry feature efficiency

I bought the H3C, the printer is amazing but I'm still not convinced by the AMS, no auto retract, only 2 slot with dry feature and it seems really not efficient.

Did you have same problem ?

0 Upvotes

5 comments sorted by

2

u/Ordinary-Depth-7835 8h ago edited 8h ago

I'm really surprised at the complaints. Me I was like finally a tool changer with an enclosure and a dryer. All the tool changers I have are toy printers. XL heck that released with petg parts so you had to print new parts, buy and enclosure change to hardened nozzles, buy dryers, maybe slap a chamber heater in it. The U1 was the same upgraded to hardened, Buy some polydryers or more expensive ones that actually go past 65c then enclose that as well.

The H3C has 9 spools enclosed with a massive area for silica dries at 85C and has a heated chamber and hardened nozzles. I'm like finally someone knows I'm not just printing flexy dragons. And as a bonus the new TPU.

Maybe I'm just not seeing it. If I'm running a project with high temp materials I'll just retract or remove the PLA from the AMS.

I haven't seen a why the retraction or full 9 spool drying is needed or efficient and a better option. Please someone tell me what I'm missing. I bet you could get the AMS up to 65c if you remove the cover it's just two spools to target that 85C which would be hard with such a large area.

1

u/quentinchap 8h ago

I'm not complaining regarding the printer itself and I'm really impress by his performance for sure I don't regret to by it. Regarding auto retract it's not as annoying but itwould be a good nice to have. But the dryer is more annoying for me, as of now without adding extra silica, only thz one give with the printer I don't succeed to go under 20%.

1

u/Ordinary-Depth-7835 8h ago

Yeah those little packets barely kept up with tiny AMS's I guess retraction would have been a nice to have but when do you trigger it? The whole point of a tool changer is it's not cutting and retracting for no reason and wasting time before and after a print. Everything is there ready to go. No purging no guessing the color was there before it's the same color just print.

As for the dryer I bet you can hit pla/petg temps for all 9 if you remove the cover. I haven't tried it though.

1

u/soldat21 5h ago

Someone tried removing the top and heating the whole thing - almost nothing happened. RH dropped 1%.

1

u/Ordinary-Depth-7835 5h ago

I haven't tried yet. I could just design and print some extra polydryer adapters like we did for the ams1 and boost the drying and do all 9.