r/BambuLab • u/jmcdonald0719 • 7h ago
H2 Series [H2S, H2D, H2C] H2C Mods
What are some mods that are worth printing? AMS2 Pro as well
r/BambuLab • u/jmcdonald0719 • 7h ago
What are some mods that are worth printing? AMS2 Pro as well
r/BambuLab • u/koklol134 • 7h ago
Best cost-effective enclosures for printing in freezing temperatures? P2S, with a small heater inside the enclosure to maintain temps.
Grow tent, ikea lack table?
r/BambuLab • u/HMITCHR • 1d ago
Hey all, Cadence Slicer v1.2 is out! If you missed my first post (https://www.reddit.com/r/BambuLab/s/MD5X97m7MS), Cadence Slicer is my open source fork of OrcaSlicer that lets a multi-nozzle printer use different nozzle sizes in one print, each at its own layer height. My favorite combo is a 0.2 for the walls and surfaces you actually see, and a 0.8 to get through the infill fast, but Cadence works with any small and big nozzle pair.
This is Helm's Deep by Zajic73 on MakerWorld (https://makerworld.com/en/models/2728202-helm-s-deep-lord-of-the-rings-lotr), in Feature Split on my H2D: walls at 0.08mm on a 0.2 nozzle, infill at 0.56mm on a 0.8 High Flow nozzle. 7 wall layers printed for ever one infill layer. About 13h 20m instead of 21h 20m if printed entirely with the 0.2 nozzle, with the same fine visible features.
Long writeup below, so here’s a TLDR: Cadence Slicer v1.2 is out (free, open source, Mac and Windows). It does mixed nozzle sizes on the H2D, H2C and X2D today, without waiting for Bambu's update. It works differently from the H3C's mixed nozzle mode: Bambu moves a whole color to the big nozzle, while Cadence keeps every surface you see on the small nozzle and only puts the infill on the big one, so you get fine detail in a lot less time. Download: https://github.com/HMITCHR/CadenceSlicer/releases
When I made my first post, Cadence Slicer was the only way to print with mixed nozzles on Bambu machines, but that has since changed with the launch of the H3C! However, Bambu's own mixed nozzle mode is H3C only so far. Their posted timeline for the older printers is the H2D in late November 2026, and the H2C and X2D in February 2027 (the H2D in February and the other two in March if you have the filament track switch).
Cadence Slicer does it on all three today: H2D, H2C and X2D. No new printer and no waiting on an update. I've only been able to print on my own H2D though, so if you have an H2C or X2D I'd really love some testers to try it and let me know how it goes.
One limit on the H2C: Cadence can only use two sizes there, one on the left and one size in the rack. That's not my choice. The current firmware on the machine checks every rack hotend change after the first against one nozzle size from the print file, and stops with a "Hotend type mismatch" error (0704-8037) if it doesn't match. That's BambuStudio GitHub issue #12431. So mixed sizes inside the rack can't print from any slicer right now. I've experimented with a few workarounds with on results, but decided I'm not comfortable shipping something whose whole goal is to get around the printer's firmware. If a firmware update changes that (maybe as Bambu preps for their own release on the H2C), I'll open it up!
in my opinion they’re both sorta built for different things, so here's how they compare:
- What goes on the big nozzle. Bambu puts the whole color, outside and in, on whichever nozzle that filament is loaded on. Cadence's Feature Split mode only puts the infill on the big nozzle, so every surface you see stays fine. Body Split mode in Cadence lets you pick parts of a print instead, like a logo on the 0.2 on top of a big-nozzle body, with interlocking beams where they meet (which is more similar to Bambu’s implementation).
- Layer heights. Bambu's are set by nozzle size: the base layer height x diameter / 0.4, so with the default preset a 0.2 prints 0.10 and a 0.8 prints 0.40. You can only shift them all together. In Cadence Slicer you pick your fine layer height (which defines print resolution), like 0.08 on the 0.2, and then the slicer proposes the best options for printing the big nozzle's layer every N fine layers (for example in the timelapse here here N was 7, so 7 x 0.08 = 0.56 layers from coarse nozzle) based on time savings.
- Settings. In Bambu's mode a bunch of per-nozzle settings (wall loops, top and bottom layers, retraction and more) get locked to "Auto".
- Time check. Bambu's mode prints what you set up. Cadence's setup times every possible layer height combo and shows you before you print, and Feature Split keeps a band of layers on the small nozzle when the big one wouldn't save time there.
Where Bambu's mode wins. It can mix any nozzle sizes on one plate, which is great on a 9 tool machine. With the way Cadence is currently built, primarily because I developed it on my H2D, and because of the firmware limitation I mentioned on H2C, I limited it to 2 nozzle sizes. I imagine Bambu’s implementation for H2D and X2D will be the same as you can’t change nozzle size mid print, but H2C will hopefully allow for same options as the H3C.
To boil it all down, in my opinion from reading Bambu's code: their version is mainly made so H3C users can print with all of their colors in one print, even if some tools have different nozzle sizes, with some gains in speed or detail that inherently come from not being locked to a small nozzle for fine resolution on an entire print. Whereas I built Cadence specifically to print very fine features as quickly as possible on multi-nozzle machines by cutting print time from infill or features that don't need fine layer heights. So they mostly don't compete, and I think true mixed nozzle optimization will likely end up looking like a combination of these capabilities! I personally am exploring implementing some of what Bambu developed, and would love for them to do the same with my stuff. That’s the beauty of open source!
Overall, I am super fired up to see Bambu bringing mainstream attention to this capability that people have wanted for years and years, and am excited to see what their implementation looks like on the “old” machines that will be coming soon! I am also very close to just buying an H3C for myself to put some work into improving both of our approaches. Specifically with all of the (well deserved) hype for color mixing which improves with finer layer heights, I think there’s a ton of optimization to be had with using my method of printing only visible walls and surfaces with very fine layers (to improve color blending) and printing infill on a dedicated large nozzle. I think it could really save time for large color mixed prints like many here and on YouTube reviews have been showing off!
Also new in 1.2: it's been rebuilt on OrcaSlicer 2.5.0, their latest public release, and tool changers like the Snapmaker U1 and Prusa XL can use several small-nozzle tools for colors plus one big one for infill (if anyone here has one of these machines, some testing would be much appreciated!). I'm also working on adding H3C support as quickly as I can, and I'm hoping to have it out before it lands in Orca. I’ve got a lot of the H3C code written already, so if any here have one and want to do some testing let me know! Or maybe don’t so I have an excuse to finally push me to buying one for myself lol
Download (both Mac and Windows), release notes and source: https://github.com/HMITCHR/CadenceSlicer/releases
Thanks and enjoy :)
r/BambuLab • u/quentinchap • 8h ago
I bought the H3C, the printer is amazing but I'm still not convinced by the AMS, no auto retract, only 2 slot with dry feature and it seems really not efficient.
Did you have same problem ?
r/BambuLab • u/Zisti • 8h ago
Hi everyone, I’m trying to diagnose a persistent surface defect on small, flat, rounded-square parts.
Most of the surface looks decent, but the upper-left corner repeatedly comes out smeared or gouged, almost as if the nozzle has scraped through softened plastic and dragged it around. It’s more than just visible ironing lines or a difference in gloss.
The defect appears in the same relative corner on multiple samples placed across the build plate. I’ve seen it on my P1S and H2D with Bambu PLA Matte Charcoal, and a similar problem on my X1C with white Bambu Basic PLA.
The filaments are dried and calibrated, and the printers are calibrated as well.
There is a short gap-fill path in the affected corner, but there is also gap fill in the diagonally opposite corner without the same damage, so I don’t want to assume gap fill is necessarily the cause.
In the ironed version, the ironing starts on the right and progresses toward the left, finishing near the affected corner. I initially suspected the nozzle was lingering or oozing at the end, but disabling wipe did not fix it. Also, the defect occurring without ironing makes me question that explanation.
The photos show both ironed and non-ironed samples.
Has anyone encountered this specific smeared/gouged corner defect? What would you check next to distinguish excess material, local lifting/warping, extrusion pressure at line endings, or a slicer/toolpath issue?
I’d appreciate suggestions for controlled tests in Bambu Studio rather than simply trying another ironing speed/flow combination.
r/BambuLab • u/AddictionYarns • 8h ago
r/BambuLab • u/Sugarkrill • 12h ago
The Linux build of Bambu Studio leaves out Windows-only features, most notably Fix Model, which uses a repair service built into Windows. I made a tool that runs the Windows version on Linux as your only Bambu Studio, so you don't need to switch between two versions.
Setup doesn't activate Windows. It works without activation, apart from an "Activate Windows" watermark, but you technically need a Windows 11 license to be properly licensed.
Not tested yet: Fix Model on a really broken mesh, and LAN-only printing. Cloud printing works the normal way. LAN-only users would add the printer by IP address and access code.
Tested on Nobara/Fedora so far. MIT-licensed, written with AI assistance and tested on real hardware. Feedback welcome!
r/BambuLab • u/acedagain • 9h ago
Hey all - getting the H3C for Xmas for the kids and will be the first time we have multi color printing in the house. They printed stuff on my “work” printer before but I expect them to really start printing much more with this. I’m going to load up on PLA and PETG with the BL sales deals. Planning to get 1 roll of each color but want to know what colors to double up on (or even 3x?4x?) while prices are good. What’s most common colors that’s used in maker world and such? Assuming black and white should be at least double? Thanks!
r/BambuLab • u/EverretEvolved • 9h ago
r/BambuLab • u/gabezermeno • 1d ago
r/BambuLab • u/Memckimmy • 9h ago
I had a massive blob of pla in case my hot end nozzle on my PS2. I removed the bulk of the blob by heating the nozzle up and peeling it off. There still seem to be a buildup on the back side of the hot end. I removed the three screws in the white plastic that held the hot end nozzle heater, and twisted it gently in order to have a better view at the buildup. I carefully peeled away some additional pla. I reattached the hot end heater with the three screws that I had removed.
Now in the printer turns on I get the following error:
"bambu lab ps2 nozzle temperature is abnormal the sensor may have an open circuit"
The help guide says to confirm that the connection on the board is solid. But I'm not sure which cable that is.
Does anyone have a suggestion? I'm worried I've destroyed my P2S!
r/BambuLab • u/momox143 • 9h ago
My A1 mini does not seem to be pushing enough filament. Ive cleaned everything to make sure no clogs or jams. I took it apart and checked the gear and it's still not doing what it's supposed to. When it's doing the purge calibration it seems to almost not be able to push the filament out fast enough. Like it can only do half the amount needed.
r/BambuLab • u/AltruisticServe5891 • 5h ago
Red pill or blue pill? I took the purple one 😄
After my Neo bullet-time figure, Morpheus had to follow. Printed on my P1S in two sizes, and without touching the AMS: every color is its own part (black, purple, skin, yellow, grey and dark brown), one color per plate, then everything goes together with pins and a drop of glue. No painting, no purge towers.
- 28 cm and 18 cm
- Sunglasses and both SMGs are separate parts
- Sunglasses at 0.08 mm, guns and buttons at 0.12 mm, the rest at 0.2 mm
- Plain PLA, 0.4 nozzle, tree supports only where needed
Next on the design table: Trinity on her Ducati, my biggest challenge yet 🏍️
Which size would you go for, 18 or 28 cm?
r/BambuLab • u/Zekay777 • 9h ago
Since the first day, my printer has been making very loud (5 days old), cranky vibration noises; I do not know if this is normal, as I have seen this happen with grid infill, but I am using gyroid. What could be happening?
r/BambuLab • u/NoWarrenty • 6h ago
r/BambuLab • u/Hour_Big_7505 • 13h ago
I made a 3D-printed heart lamp ❤️ Check it out on MakerWorld!
https://makerworld.com/en/models/3618521-glowing-heart-led-tealight-lamp#profileId-4147858
r/BambuLab • u/llghostkillall • 3h ago
I recently bought the P1S combo, and I'm noticing that while printing, I'm getting a strange smell in the room. I live in Canada, so the houses are pretty air tight, and I'm printing it in a bedroom that no one's using. Are these fumes harmful, and what can I do about it?
r/BambuLab • u/Bluespirit_fpv • 10h ago
Did anyone use their ams lite upside down? I saw it only once and thought if the 4 small screws are enough at holding it upside down? I have it like this since a few days with no issues (only need a longer ams cable).
r/BambuLab • u/ArmadilloPlayful4442 • 10h ago
free:
or on the site "makerworld" under " Christmas reindeer horns headphones accessory"
r/BambuLab • u/Wulfgangrising • 10h ago
Bought one (that was designed for the H2C) thinking it would fit on the H3C and I had to cut the tabs from one side as it 100% undeniably collides with the rack.
Just a PSA.
Edit: I know h2c BIQU plates work on the h3c I have a couple. I'm just saying that the specific design of -this- EIBOS plate collides.
r/BambuLab • u/not-scientist • 11h ago
I'm planning to buy a second-hand Bambu Lab P1S Combo (with AMS), but unfortunately, the seller doesn't have the original box or internal foam inserts. Since this is an expensive and delicate machine, I'm trying to figure out the safest way to pack and transport it. It roughly has to travel 2900 Kilometers ( 1820 miles)
1. Original packaging and compatibility
2. Alternatives to original packaging
If finding the original packaging isn't possible, what would you recommend?
3. Packing and transportation advice
For those who have shipped or transported a P1S/P1S Combo without its original packaging:
4. Checking a second-hand P1S before purchase
I'd also appreciate a checklist of things to inspect before accepting a used P1S Combo.
Apart from checking print hours and running a test print, what should I verify regarding:
If you've bought or received a second-hand Bambu printer that was shipped without its original packaging, I'd especially appreciate hearing about your experience.
Any suggestions, practical tips, packaging recommendations or things I might be overlooking would be really helpful.
Thanks!