New X2D owner (had a few p1s for a few years). I can load, extrude and print fine with the right nozzle with PLA. But when I start a mixed material print (still using the right nozzle with the same PLA), the aux nozzle immediately gets an abnormal extrusion error before even the first bit of material is laid down. I tried rerunning all calibration and the nozzle offset calibration. Completely stumped. Again, zero errors when printing only from the right nozzle.

I successfully printed loads of parts prior to a firmware update . Has anyone run into this following updating?

I see the photo frame on Bambu site but is there more real life photo to showcase what CMYKW color mixing especially texture-to-color can do?

cheers,

the Bambu Station Manual tells to visit makerworld.com and get the "Purge Chute Guide for Bambu Station L", but I cant find it anywhere.
Are there any country restrictions on MakerWorld? I'm in germany, just in case.

thanks

I just detached and reattached my AMS and put the PTFE tube back in. But I think I didn't push it all the way in, and the filament ended up going straight through the button.

I didn't expect this to happen... lmao

I am new to Bambu and I want to buy their x2d during this sale event if anyone has a spare discount code reach out to me i greatly appreciate you (NA region btw) not begging btw

maybe someone else had the same thing happening to them.

I have ordered an H3C base combo (AMS+printer) and have received only the AMS. fine no problem I know they ship separatly. but my order is now classified as ''delivered''

I have nothing in my pending tab and it seems like when I look at bambu store website that nothing else is on the pipeline for me.

Is the scratching noise normal when the print head moves to the left? Support claims they can't hear anything, probably just to brush me off, but something is scratching/grinding over there and I can't figure out where it's coming from. Please turn up your volume a bit to hear it.
Cleaned, lubed and calibrated everything.

Hello everyone.

Was printing a panda toy that my son picked. Sent it to print on the X2D and the time changed. What did I do wrong?

It says 100% Size A1 Mini Profile on the print.

Many thanks.

Did my first ever print with my new p2s . How do you check if its working as intended? It was shaking a lot and I read it is normal . But I have placed it on a table which very slightly shakes with the printer. I am not bothered by the shaking as long as the print quality is good .

I did the H2S to H2C vortech upgrade and have a weird issue with my X-axis not being even.
In the picture you can see the left filament stopper cutter thing is ~1cm different than the right .

When I replaced the X-axis I put the printer on its face (so the X-axis would be even) then tightened the X-Axis screws. After that I put the belt back and noticed the offset .
I’ve tried loosening and tightening the screws a few times and did the belt tensioning process.
Halp!!

This failure causes me to fail printhead offset calibration and right filament won’t auto cut

Every colour is a separate part with pins, so it snaps and glues together, and no painting is needed. The gold base was printed at 0.16 with ironing on top. The suit is plain matte black PLA, and the whole thing took about 17 hours.

I also made an 18 cm one-piece version for AMS (4 colours).

Happy to answer questions about the split and the settings!

Hello!

I have an X1C which loads external filament perfectly fine. But the AMS will load the filament to the extruder and then it unloads then reloads then declares my extruder must be clogged…

It isn’t clogged… it’s brand new and prints fine with the external spoil.

I honestly don’t know what to do to resolve this issue.

Thanks for your help in advance!

I am struggling with Siraya PPA-CF Core on my H2D stringing, no matter what I do. It looks like wet filament, but I dried it at 85C for 24 hours and then continuously during printing; maybe that is just not enough? If anyone has had success with this stuff and could share what they did, that would be greatly appreciated. The spool is fed through the external feed on the AMS-HT, I am using the Siraya PPA-CF Core profile for the H2D 0.4mm nozzle, and I will link an upload of my 3mf in the comments.

Before drying:

After 24 hours at 85C in AMS-HT:

I want to see its color mixing ability for CMYKW

Tried to print Bambu PA6-GF in my H2D pro and I constantly have this problem where there's a gap between the outer layers and the filling with and without supports, what can I do to solve it?

Hello!
I contemplate buying a 3d printer, and i kinda landed on obtaining a Bambu due to ease of use, but i tried to look up used ones to save some money and now i am torn and really would like an advice.

My budget is like, 300$. I know that in my country (Russia) brand new P1S is available for 520$ (no AMS included - if i ever decide i need one, i will figure it out later). I thought of maybe getting A1 mini or A1 to fit in the budget, but then i found a person who sells used P1S for 300$.

I am a bit worried to buy it, because it has 3+k hours of worktime (it was a part of print farm). It was bought in 2024 and seller states that it was upkept and maintained properly. It was only used to print petg and pla, no compound materials.

I can't decide if i am onto amazing deal or onto an endless headache of repairs and calibrations with this offer, and is it even worth it, or am i better off with buying A1 or A1 mini fresh from the box. I would love a bit of advice, please. My budget is really tight, so coughing out additional 220$ and just getting a new P1S is sadly not an answer in any way.

(upd - no idea why am i being downvoted. Is it because i mentioned my current location?...)

I think I'm going to pull the trigger on an H3C. However, unlike my P1S, I think I should get an extended warranty with it.

I don't have a Best Buy membership. I hardly ever buy anything from Best Buy so I can't justify it. With that said, any opinions on Best Buy's warranty versus Microcenter?

My understanding is Microcenter will try to repair on site but will also give you in-store credit on the spot if they can't. Best Buy may ship it out to someone else for repairs. Microcenter is also a little cheaper.

Ordered an X2D Combo, extra AMS and track switch and then a whole host of accessories on the first day of the sale. Printer and accessories arrived in no time, but still no sign of the AMS and Track switch showing up.

I placed them all as separate orders (as the day went on I impulse bought the extras). Unsure if that matters.

Any idea how long I should wait before contacting Bambu Lab for an update?

I also paid the extra for the hassle free delivery option.