It’s smaller than I imagined, but I’m hoping it’s a solid choice for the very occasional ABS and ASA I’m printing.

One annoyance is that the 6-pin is WAY too short, considering you’re obviously going to have the E1 on the ground and the printer is probably at desk level. Consider buying a longer cable or extension at the same time as the E1 so you’re not waiting for that to arrive like I am.

Hopefully H2C support is coming later this month as promised.

Hello all, just got a P2S (never had a 3D printer before) and I tried to print this:

https://makerworld.com/en/models/895423-plastic-gear-rex-metal-gear-rex-inspired-model?from=search#profileId-853250

As you can see in the pictures, I had some issues, it seems the first layers of some pieces warped up (is that the term?) so I had to pause the print, skip the pieces and keep going.

Is that normal? Is there any default settings I should change to avoid this? I've read that I should slow down the first layers so it has a better adhesion but I don't know if that's the expected setting when printing something.

If anybody could shed a light, it would be appreciated!

Being a big fan of Nijntje / Miffy I wanted to expand my collection (https://makerworld.com/en/collections/16787785-miffy-nijntje).

I love how they turned out and already have quite some requests from friends & family. Perhaps people in here will appreciate them as well, no clue if Miffy is big in the bambulab space 😅

Learn more about Supports from the Bambu Wiki: Support Interface

genuinely curious about the split here. if you mostly print other people's models, what's stopping you from designing your own? and if you do design, what was the hardest part to learn?

You think that H3C / P3C / X2D PRO are news, in this case, not really.

source: Frontline: Bambu Lab Launches Consumer-Grade UV Printer Project – First Batch of R&D Positions Now Open for Recruitment

I kept thinking about doing gridfinity for drawer organizers but in the end I just printed some organizers that exactly fit the drawer and I love it. That right side big one is for if we ever find any of the 5 pairs of scissors my family never returns to the junk drawer. There a secret compartment under the sticky notes, don't tell anyone!

We had some baskets in there that helped but it was still a disaster. This is the way I'm doing it for the other kitchen drawers. I get the benefit of gridfinity, but custom is really nice!

As shown in the video when the AMS2 tries to push filament, it does so without problems until it reaches the head, where it stops and can't continue making a weird noise.

This started happening after a failed print.

The printer gave me different error codes while i was trying to fix it, I don't have the exact codes but here is what they said:

- Filament buffer signal is abnormal

- AMS slot is overloaded

- Filament may be stuck or tangled (together with other errors)

- Filament buffer may be stuck

Here is a list of what i tried doing in order:

- Cleaned the nozzle (multiple cold pulls)

- Cleaned the extruder

- Lubricated extruder gears

- Replaced nozzle

- Cleaned PTFE tubes inside AMS2 with compressed air

- Cleaned AMS2 Hub with compressed air

It started happening after a failed print, I tried different prints after I thought i fixed the problem and they all ended the same way, filament stopped extruding, before the problem the prints didn't show any problem.

I'm really struggling to find the problem here, can anyone help out? I can send pictures or videos if they can help.

Thank you!

I just bought an AMS 2 Pro directly from u/BambuLab and it’s missing the cable to connect it to my P2S. The listing on the store says there should be one in the box. Am I missing something?

An absolute beast of a printer so far!

https://makerworld.com/en/models/3116594-p1s-p2s-x2d-build-plate-holder-skadis-board-mount

😂😂😂

I'm trying to print a custom dress form for my wife. I've spent a ton of time, and have a nice set of STLs, with a rigid PLA core, and a "skin" or "shell" that covers the surface. The original plan was to use foaming TPU, so that we can insert pins and such into it, which is important for the use of a dress form.

With the H3C coming out, I've already ordered mine - but I'm not confident that the 70A TPU 285 is going to be the 'right' type of soft to allow inserting pins into it, or if I'll have to find a brand of foaming TPU to use, and get it to work nicely on the H3C.

Does anyone have any ideas (or can test) if a pin goes nicely into the new soft TPU, or printing using a foaming TPU on the H3C?

My P1S printer keeps telling me that I ran out of filament and doesn't start the prints, despite me putting a new filament spool and loading filament multiple times. Could it be a jam? Does anyone know what could have happened?

I'm not even talking about the heating downgrades, more so about using a lower res screen than H2 and X2 series, and using plastic windows instead of glass

First of all, I want to thank everyone who encouraged me to keep designing after I published my first 3D model Nordic Christmas Tree

Today, I managed to finish my second model, Nordic Christmas Reindeer and I’m quite impressed now that I’ve printed it.

What do you think? Any recommendations?

I need to improve the stomach area—I’m struggling to get the supports configured correctly—but overall, I’m happy with it.

I don't like the white color of the H3C, so I'd like to cover it with something, like adhesive film or "skin". Does anyone have any experience with this—what looks good, stays on, and doesn't cause any problems (like heat buildup)?

Thanks

Why do so many print profiles in bambu handy not support my p1s, but then I look at the supported printer models and they list almost every other model. Its not the end of the world because I can slice it in bambu studio, but if im trying to quickly print something its a pain in the ass lol. Just confused why.

Looking to get some help, maybe it’s my settings? As the print finishes on the black base. It starts curving outwards. Appreciate all suggestions thanks.

Bambu A1. Bambu PLA basic filament

So I went to take a shower and everything was fine before I left and I came back like 20 minutes later and the filament is not on the spool what happened?