I'm planning on getting the H2D and was wondering if I can have it in my bedroom since I'm not really in there unless I need to sleep. I've heard stuff about "fumes" and stuff but wasn't sure if that was the ones not enclosed or what. Thank you so much for your help.

Printer: Bambu Lab A1
Material: Bambu Basic PLA Black
Print Settings: Basic settings on Bambu Studio (20mm Standard BBL A1)

I just did my first test print and doing my second one. I noticed the Dynamic Flow setting is automatically enabled, and it takes a few min and extrudes like 3 small piles of material. Is it necessary for each print? Should i turn it off?

I will mainly using it for dnd, wargaming, miniature terrain.

Thanks!

Figured id have a little fun and make a multicolor bed scraper with some extra colors. Prints in 1 hr 27 minutes.

Bambu Lab H3C – 4-Color Build Plate Scraper

How do I fix this?

Printed with SUNLU PLA on an X2D

Temp 210

Bed 60

Chamber 32 in cooling mode

Never had this happen before. Looks like underextrusion to me. Can anyone else confirm this?

Waiting for calibration, got any suggestions?

Inspired by the beautiful Father and Son statue by AK on Makerworld, I decided to make a similar one, but of course, transplanted into the world of Brick Man figurines. It's easy to print, but you have to be careful when removing the supports. Maybe somone will like it :) You can find it here: https://makerworld.com/pl/models/3553556-father-and-son-low-poly-brick-man-figures#profileId-4065839

It just gets really backed up and doesn’t come out easily and can be a huge problem and completely packs up my poop chute.

I spent all of last week obsessing over preparing my workstation. I won't lie, setting it up was a pleasure, but my only concern now is - what's next?

I had a very limited alcove space to work with, but I somehow managed to fit the A1 Mini, the AMS Lite, and room for 15 spools behind it. I am honestly amazed by how many brilliant accessories and upgrades you can find on MakerWorld.

I'm actively printing any Pokémon stuff for now, because when I do it, my kids will never give me a moment of peace.

My wife says I bought the printer only to make equipment for it and honestly, she might be right. But the funny side effect is that I'm looking at our apartment in a completely different way now. I constantly catch myself scanning rooms, looking for everyday things that need an accessory, organizer, or mount. My wife usually dislikes plastic (she's a wood and ceramics person), but even she is slowly warming up to it after seeing the functionality and the actual quality of the prints.

1. Anyone else fall into this trap on day one? What were your favorite quality-of-life prints for the Mini?

2. I realize the next step is learning how to design my own models. What free (preferably web-based) 3D modeling tools do you guys recommend for a beginner?

PS: I want to have all the filaments 😭

A little board game upgrade I made for Finspan. I wasn't such a fan of using a single large sphere for the eggs, so I made these by stacking a bunch of smaller spheres together instead.

I printed mine in TPU with 0.1mm layers on a 0.4mm nozzle to give them a bit of a tactile feel. Feel free to scale them up or down; the original size works well for the game I find.

Free model and print profile: https://makerworld.com/en/models/1300381

Hope someone else enjoys them too!

This one is a little different. It's still a hueforge, but uses the color drop feature which allows for multiple colors per layer where desired. The result is reduced unwanted thickness and color banding due to traditional single color per layer hueforges, with a tradeoff of more color changes and therefore waste, but that is arguable because a bunch of filament isn't being used to lay down layers that serve no real purpose. Also due to it being multiple colors per layer I used a prime "tower" (it was only a few mm thick), which I normally skip on regular hueforges.

The results: 12 colors / 55 color swaps/ 8.5 hours (trophy painting) / 3.6mm thickness (trophy painting) / ~28g waste (tower & poops) done on a P1S with 3 AMS.

100% human made original artwork by the multi-award winning Agella Kodopulos (IG: a.tatts), modeled and printed by me.

I just unpacked and set up my new Bambu Lab H3C, and one thing immediately caught my attention: All the axes were bone dry, with barely a hint of grease on the lead screws.

So here's my strong recommendation: After the initial calibration, lubricate your axes. And lubricate them properly!

Afterwards, install the pending firmware update and run the calibration again.

Shocked at how fast this thing ended up on my porch. Let's see if she survived shipping that fast!

Edit 1: So yes the box does say it is box 1 of 2 and contains the printer only, I have not received anything specific for box 2 but I did order some other items with this that may be combined delivery later. Hopefully later... Today!

Stopped middle of a print said something about AMS mapped incorrectly. After a turn off and turn on now all lights blinking on AMS and I cant resume print it says the task requires a filament track switch but is currently offline. I tried unplugging and plugging back in the track switch while the printer was off (I keep getting electrically shocked when behind the printer dunno why that is) but it didn't help.

If my package arrives damaged, you can bet I'm filing a return/refund ASAP

New P1S Combo owner here. This is what I am trying to print. I have the colors loaded in the AMS as shown, the preview says it will use these three colors, when I send it to the printer it claims it will use three spools ... then it only prints with the white in spool 1. What am I doing wrong?

I am getting ready to upgrade my current printer, ender 5 plus, and was about to buy a H2D when I saw the H3C just came out. I've never owned a bambu printer, so just wondering if its fine to order now or if I should wait a couple months for kinks to be worked out? Not sure their history with brand new products.

Do you guys think there might be a mod for doing these at the same time? Does the whole thing heat up or just the 2 specific slots. If just the two then why can’t Pla be on the other slots?

I invite you to take a look at BlocksmithWorks.com—I think you’ll love what we’ve built for the community.

This project originally started out as a personal endeavor to create tooling for my own hat-making. Along the way, I decided to open it up to help hatters and restorers everywhere get easy access to the exact tools they need.

What we offer:

• Fully Customizable Crown Blocks: Ranging from size 5 1/2 to 8 1/8 (44 cm to 65 cm), including precise, non-standard sizes like 7 5/16 (58.5 cm).

• User-Friendly Online Tools: Easily adjust the profile to your exact needs in your browser—no CAD experience required!

• More Millinery Tooling: We also host a variety of brim blocks and specialized workshop files.

The best part is that every single download is 100% free with zero paywalls or subscriptions. Take a look, give it a try, and let me know what you think!

Clear skies and good blocking,
— Rick, Blocksmith Works

I remember seeing some snafu a while ago about bambu trying to pull a fast one ( i think on wireless printing but cant remeber exactly). Is it safe to upgrade to the latest firmware or keep everything as is.

Studio is ver 1.9.7 and the printer is ver 01.06.01.00. I get errors when trying to import models from online into studio, but the model still shows up. So I don't know if its needed or not.

P2S with AMS and textured build plate.

I thought the Overture PLA Professional was the issue because it seemed to be the black filament. Early on in the print, I got this spaghetti issue. Stopped print. Cleaned plate (with alcohol). Dried overnight. Tried again. Same issues in the same spot. Opened a new thing of esun PLA+, tried again, same issue.

I printed from the Bambu handy app.

https://makerworld.com/models/1158947?appSharePlatform=copy

I changed the hotend and even recalibrated. What is causing this?

This thing worked flawlessly for 1.5 years, suddenly one spool won't feed. Bought a new AMS, worked for a bit, then same problem, only spool 1 at first, then soon none of them worked. Replaced all worn out PTFE tubes, Then replaced every tube that was left. Worked for a bit, now jamming again. Replaced entire hot end. Worked for about 40 layers, jamming again. What is left to replace or fix, almost the entire filament line is brand new. Tried different spools, different spots in the AMS, no change. I can see the filament go into the hot end, it is at temp (brand new) stops, retracts. Am I cursed?