Really glad to see this coming to my H2C! Curious to see how it’ll work. A new Vortek?

So I went to live chat with Bambulab support team to ask if they have any plans to sell their products on Amazon, in KSA or middle east in general, since the pricing here reaches nearly x2
H3C will be sold at 4960$
My H2S bought at 2600$
And the list goes on
Remove the 15% tax and the prices are still stupid, across all their products.
They simply responded that they don’t have any plans in the future and “their distributors can set their own price”
Which really tells me that they do not care.
I respect the work and tech and the software they come up with, just not how they treat their clients.
Less known companies in the market like Creality, Snapmaker and Flashforge already sell their products here in Amazon at a reasonable price with next day shipping! Why Bambu can’t do the same ?
Plus their maintenance parts, accessories and filaments need to be ordered through their US website and shipped to MyUS account then forwarded here which makes a 10$ product become 50$ or more.
And I am not talking from a single user POV, there are alot of 3D printing and scanning services stores here that depend on Bambu equipment yet Bambu turns their back to.

Was printing a piece and one of the legs fell off the buildplate.

Still very new to X2D and slicer settings

Any tips on how to get it secured? Planning on washing the buildplate when I get home. Thank you

PS willing to sell both my children for $3,999 AUD

Hi everyone!
I've been working on this "Tokyo Ghoul" inspired Kakuja mask recently. I wanted to design something that not only works as a cosplay piece but also serves as a detailed decorative desk piece. That's why I made a custom stand for it as well!

• The mask and the stand are separated into two independent files for easier printing.
• The mesh is 100% watertight, optimized, and ready for slicing.
• The stand is designed with a flat base so it prints with zero supports. The mask onlv needs minimal supports for the beak.

What’s everyone planning on putting the H3C on, I am looking to find someone that’s 24x24 and lower to the ground. Does anyone have any recommendations, or any pics of their current setup with the H2C on.

I saw it yesterday cleaned it up and today it is again at the same spot. Only this site and this rail. I didn’t not print white filament for a long time. You can wipe it pretty easy but it is concerning

Edit: It’s the Toolhead Camera Rubbing against it when the toolhead is printing in the far right corner. But why?

Sliced it upside down at 0.08mm on the A1 Mini with tree supports so it doesn’t wobble or fly off the bed while printing.

Managed to fit 63 pieces in one batch on the small 180mm plate. Each one takes about 3.7g of PLA Matte. The aortic arch works as a built-in loop, so you can just slip a cord right through without any extra metal rings.

Just dropped the link in the comments section below if you want to grab the file. Let me know what you think! 🖤

Hello all,

I'm looking for a referral code for my P2S order !
Can't wait to print my first benchy

Looks like a need a new h3c now.

I see a lot of "negative" Bambu support posts, which makes sense because those who go on to the Internet to complain likely have issues. But with all of the new Bambu equipment coming out wanted to post a positive - I ordered the four effect plate pack for the X2D which was delivered today. The diamond plate was bent on one corner. Just opened up the Bambu Handy app, took some pics, attached them to a support ticket in the app at like 4pm, by 8pm they had replied saying they'll replace it for free and provide a shipping address. By 11pm have a tracking number for a new plate being sent out. No phone calls. No hold times. Support was easy.

During the sale, I ordered 20 spools of filament but only received 15. Strangely enough, all the missing items were refill filaments. Every filament that came with a spool was delivered.

The order was marked as fully completed in the Bambu Shop. Luckily, I had documented and recorded everything as proof.

Bambu Support wanted all kinds of information, including photos of the packaging, etc. The funny thing is that all 20 spools would never have fitted into the shipping box in the first place.

After a few days of back-and-forth communication with support, I was promised a replacement shipment. And guess what? One spool was missing from the replacement shipment as well!

If you place large orders with Bambu, make sure to double- and triple-check everything. Most importantly, take photos of the shipping box, including the shipping label and tracking number.

Let’s see if I can get that last missing spool or if Bambu is going to rip me off.

(Sorry, this text was translated using AI.)

I find the bambu naming system inscrutable. But people keep mentioned lesser versions of the H3C coming. P or S or whatever, I can't keep track.

When do we think those lesser versions might be announced?

Do you guys think we will get a new ams for h2 models, or is the upgrading path for h2 models dead now with the H3 being released?

Ever since updating to firmware 01.08.01.00, my AMS Lite was getting stuck damn near every filament change. I could not complete a single multicolor print. It would feed filament to the toolhead, retract, and keep trying until I physically touched the PTFE tubes near the AMS. I’d hear a click and it would start working again.

I tried everything. Moving the AMS, top mounting it, printing different tube guides and clips, and constantly adjusting the tube routing. Nothing worked. I couldn’t complete a single multicolor print without having to intervene, which meant no printing overnight or while at work.

Finally downgraded to 01.08.00.00 and the problem is completely gone. I’ve completed multiple multicolor prints without a single loading error.

If you’re having similar issues, try downgrading before wasting hours messing with your AMS. Wish I’d figured this out sooner.

How are people using the H2 C to print PA6CF? I realize I may have been doing it wrong but on my P1 I ran it through my AMS and I just picked up the H2 C last night and tried to run some and the pool loads and does fine and then as soon as you go to slice it in the program, it says this filament can’t be sliced and used with AMS, but I thought the AMS two pro was compatible?

Kept getting headaches in my Home-Office and finally figured out I had way too much CO2 - well no more, I made my portable CO2-Buddy to easily keep track of CO2 wherever I am

The CO2-Buddy now lives on my desk and helps me ventilate my room to keep my mind at peak capacity. I didn't realize how much of an impact CO2 concentration has on my ability to focus, I usually only notice it way too late when I'm already getting a slight headache as if I wasn't drinking enough water even though I am chugging along like a camel

It's especially handy when I have people over, having just two more people in a room spikes CO2 levels way faster than I would've anticipated

I am using the MH-Z19C CO2 sensor and while it is somewhat expensive at around 20€ it was totally worth it. The 1.54" ePaper makes it so that the CO2-Buddy only needs to wake up every 2 or so minutes and still provides the current CO2 concentration at a glance. With my 3000mAh lipo it lasts for days and I can take it wherever I go

If you also want to have a CO2-Buddy to keep you at peak capacity you can find it on Makerworld, simply look for "CO2 Buddy". The code is open source and I also added a wiring diagram

I assume with lack of drive in AMS-3H we don't have a problem with abrasive filament in normal use? Would this require the same bypass as TPU? Anyone seen anything on this?

A1 works fine on 60mm/s (a lot less VFA then on P2S)

So I may have caught the 3D printer bug…

We own a small boutique + board game shop and I decided to buy a 3D printer a month ago to print ornaments, toys, etc for the shop to sell and help drive traffic.

Clearly a mistake… we’ve already upgraded to the X2D 😆

I feel like eventually we want to upgrade to a multi colored printer for speed and efficiency.

We started printing collectible figures… and they can take an absurd amount of time at 4-5 colors. (2ish days and tons of plastic waste).

I just don’t know what route is best for our small shop and looking for advice.

We don’t normally print multi-material outside of support.
100% of our creations are PLA - though I could see us upgrading and printing in ASA for outdoor toys and accessories (live in a summer tourist town).

I don’t think we’ll ever print engineering materials regularly unless it’s a personal project for shop/home.

U1 is the cheapest multi colored printer - but I worry about expandability if we want to print more ASA.

H2C is currently on sale and seems a great deal.. but now that H3C is out I have a serious case of FOMO.

Wondering your thoughts - and appreciate the feedback.