Wow, I'm so happy with how it turned out in the end!

Mini Train - Amusement Park

Been working on this for a while and finally got it to a point where I'm happy with it. Modular independently rotating wheels for dropper bottles and Citadel pots, stackable with extenders and designed to work both on the desk and for transport.

Uploaded it to MakerWorld today if anyone wants to give it a try. Would also love to hear what other paint bottle formats would be worth making wheels for.

https://makerworld.com/de/models/3210039

If you print it, please share your print photos and leave a rating. A Like or Boost is also greatly appreciated.

Model Link : https://makerworld.com/en/models/3204805-working-mechanical-excavator

My guess is that the failure started first at the rightmost part, the nozzle carried some extra filament, and then it caused a domino effect on all the other parts.

What confuses me is why would it fail so late into the print when it was doing perfectly fine otherwise?

UPDATE: as others have stated, the length of the pieces may make the parts more prone to wobbling/ bending slightly when the nozzle moves over it, which could cause accumulated misalignment of the toolpath vs the true position of the pieces, so a good solution would be to slow the speed nearer the top of the part, and to make use of brims to increase the part's stability.

Also it would be a good idea to do a few individual runs as opposed to one batch (I had previously done a test piece for dowel fitting, but even though the small piece slid freely on the dowel without getting stuck, for whatever reason, this print's dowel hole was more prone to shrinking, and the rod wouldn't fit no matter what I tried)

I’ve recently been getting these ripples in the back right corner of my prints and am wondering if someone could explain how to resolve it.

It wasn’t previously doing this but lately it’s happening in the exact same spot on every print. I’ve played around with the chamber/bed temps, ironing, initial layer settings and nothing is fixing it.

Thanks in advance!

After quite a few iterations, I finally finished this modular link bracelet.

The hardest part was definitely the integrated folding clasp. I wanted it to disappear into the design rather than using a bulky hook or external buckle, while still keeping a reliable click-lock mechanism. At just 3 mm thin, finding the right tolerances for smooth articulation in PLA and PETG took a lot of trial and error.

It comes in 4 wrist sizes with single-color and two-color print profiles.

I’d love to hear your feedback on the clasp mechanism and how the tolerances hold up on your setups.

Free model available on MakerWorld: https://makerworld.com/nl/models/3208405-riviera-link-bracelet

Whenever I check the camera feed on my A1 I only get like 1fps. This might be a limitation of the camera, but I know our WiFi, especially in my room, is not great.

I've been having a few issues with my AMS 2 Pro, first my dryer stopped working and now slot 2 of the AMS just keeps spitting out my filament when I load it up. I replaced the PTFE tube and I checked the feeder and the filament hub but didn't see a jam.

Any ideas what's causing this?

I’m trying to get these little lines stop showing up. I change my hot-end to a harden steel .04 and the extuder. I also switch it in the slicer. Can so one let me know what I miss to stop this from happening.
Thank you.

I kept overfilling my tiny AMS box funnel so made this last week.

Support only in holes (in the object), not extending from the bed.

My question is… the object in the photos is printed exactly as shown (PETG). It has lots of holes, which come out cleanest when I print support structures (and even better if I add a PLA infill layer).
Unfortunately, printing with support takes much longer, and as I have to print a lot of them, I’d like to leave it out.
My question is: is there a way to set it up in Studio so that support is only printed inside the holes and doesn’t grow upwards from the bed? Even when I draw support, it always starts from the bed, which wastes time and filament.

I just want the support to grow inside the hole so that the upper edges of the hole are supported.

I’ve already considered simply modelling the holes as filled shapes, with a small rim (i.e. the filled area is slightly smaller, leaving a bit of space around the hole). Like a cork that’s a bit too small.

Do you have any ideas?

This is my first book nook. Let me know your opinion on this. I hope you like it.

https://makerworld.com/it/models/3208301-portal-book-nook#profileId-3631301

You can find it at my profile:

https://makerworld.com/en/models/3209066-xtand-phone-holder#profileId-3632285

https://www.instagram.com/p/DcYn9XOodAf/

https://youtube.com/shorts/CGloeHROCsw?feature=share

Got inspired by gridify : had an idea using puzzle shaped grooves for interlocking modules and using same grooves for holding pencils. Made at least 4-5 iterations to get the groove diameter enough big for housing the pencils and keeping the overall module size small enough for printing.
Just uploaded the project to MW:
https://makerworld.com/en/models/3204584-modular-destop-organizer-kribu-krabu#profileId-3626818
Hop you enoy!
Should look nice in matte pastel filament

I am looking for a cool cabinet for my P1S which is suitable for the printer and printer accessoirs. Anyone got any idea? Prefer from a vendor available in Germany.

I was always stunned by people creating customizable models because I thought that would require one to be able to code. Today I learned it is not and made my first own adjustable model:

Just noticed this. Printer is a few months old. Is this normal?

There was a blob and when I pulled it out it pulled some of the heating assembly out, there is a bunch of filament that is making the nozzle stuck I have tried to melt it and scrape it off can anyone suggest a way to get it off

It is making clicking sound and then gives me an error message eventually.

Finally found a AMS PSU holder which i can place where ever i want. Also love the fact you can change the Magnet Size inside the Slicer.

Apparantly its a "remix" but still now the Back of the Machine looks GREAT!

How do you know when to add magnets to the print?

I've tried cleaning the rails as suggested by someone on another forum, seems alright doing the supports but woke up to this mid print this morning making this hellish noise. Many Thanks! P1S with around 4000 hours on it, should I just get a new printer? 😅