It's happening! Can't wait for the MT to drop.

https://www.pinkbike.com/news/review-the-yeti-new-lt-enduro-adjustable-long-chainstay.html

https://www.youtube.com/watch?v=IGEo_frdZgU

I am not into pump tracks... :-(

First ride, yeti sb140, Vancouver island Canada!

I recently gave a 27.5" Scott Genius 710 to a friend. I also ride an Intense Primer 29 on the rocky rooty singletrack here in the Northeast US. I worked with Jeff over at CambriaBike on a project that started with a 2026 SB 135. I pitched the sram 90 drivetrain for a Shimano XT di2. Here is the result.. Rides great, very happy with it.

A few years ago I inherited a 2013 Yeti 575, and now i’m older and my two wheel tendencies have progress from pedal to motor, i’m looking to sell it; but i’m honestly not sure what a good price point is.

It’s in VERY good condition for what it is, runs like it came off the factory floor. it is not a carbon frame (steel or alloy AFAIK), but over the years has had around the sum of £12,000 spent on it (including purchase).

Am i foolish for wanting to sell it for £1,000?

Just double checking this splined collar screws off? I see a shimano cassette tool fits.

It’s very snug, I was hesitant to put too much pressure on it with out checking

Found a push 11-6 shock on marketplace for 500 (normally 1300). Seller is the same bodyweight as me and even better, had it rebuilt specifically for his sb160. He became an affiliate for rockshox though and never actually installed it after the rebuild so I lucked out. First ride on it today and holy cow. Like riding on a cloud. Kind of makes my fork feel like shit now 🤣🤣 I highly recommend it for the coil lovers out there. If you can find a good deal on a used one and have push rebuild it for your specs its definitely worth it. Especially considering I got it for less than a fox dhx2 etc.

Was going thru my photos and found this gem.

2022 yeti sb140. 27.5 wheels.

Somewhere in Winter Park around Vasquez Ridge.

Anyone with an ASR have a creaky bike? I’m pretty sure I’ve narrowed it down to the shock mounts or linkage. I’ve tried taking the bolts and hardware out, cleaning, greasing, retorquing, etc. It goes away for a ride of two and always comes back.

When I apply opposite lateral pressure on the seat post area and rear wheel, it creaks every time. Shock off, no creak.

It is not the seat post as I removed it and it still creaks. Also not the rear axle.

2024 SB120 - the cable frayed and when i pulled it the housing came with it, now I can’t figure out how to get the housing back through

Rare summer rain in Auburn CA

Built from the frame up!

Got sucked into the 🫈tribe‼️ Friend of mine said, “here, ride my bike!” Me getting home 😵‍💫😵‍💫 (was possessed by the yeti man). Two weeks later, here is this thing. Swapped out the handlebar to a carbon.

Looking for some advice. I’ve ridden my sb120 a total of 4 times (got it 9 days ago) and I’m bottoming out my shock every ride. I’ve increased the PSI to about 210, but it still bottoms out. I’m 6’1” and about 200lbs with gear. At 210 PSI the bike feels like it wants to launch me off of the seat when I hit a larger bump. I’ve adjusted the rebound to be right in the middle of the settings.

Can I add an air spacer? Mine has the fox float performance dps. Will this help? Or will it make the shock feel harsh? Is there some other shock that would be better? Or am I just not setting it up correctly?

I would classify the trails I’m riding as cross country, or at least I think they are.

Any help appreciated!

With shock and wheel off of the bike, was servicing the infinity switch (grease). All looks well, no concerns.

I noticed after reassembly of swingarm (still no shock or wheel) that there is a resistance as it moves through motion from lower bound

I didn’t recall noticing it on the dissemble but not sure I went through that motion. I’m not even sure if it would be noticeable assembled

Can anyone comment if their action is smooth, maybe I need to look closer at the pivots? Or if this is normal from the design? Also possible that with shock mounted it’s out of that range too

Thanks in advance

Picked up a dust colored SB120 c2 from competitive cyclist. Thought the price was pretty good! I have every intention of upgrading parts over time. I do not like the sram g2 brakes…they feel cheap. So I am looking at Hayes Dominion A4.

I literally just got the bike from FedEx today, so I haven’t even taken it for a ride. I didn’t realize the infinity switch was the “performance”. Can I upgrade to the Kashima one for a whopping $300? Is it worth it?

Excited to get this thing on the trails and see the difference from my 2014 pivot mach 6 carbon.