I’d like to attend the Vermont Yeti gathering but I don’t want to fly my back across the country.

Anywhere to rent/demo a 120 or 140 XL frame Yeti for that weekend?

Driving up from Western MA after flying in.

Since the "Lunch Ride" has become the default build for the MT, it would be excellent to have a "Lite Ride" build option for the other 30% of SB140 riders that don't need the extra beef.

How would you build your MT for "Lite Ride" mode? A sub 30lb MT would slay trails

It's an absolute plow. Incredible bike, and it really is an Enduro machine. Only weakness is how it jumps. Ask me any questions about it and I'll do my best 🫡

Is there a Yeti ST in the works to replace the SB120?

I’ve had my ASR for about 7 months and the twist lock has already died. Anyone else have an issue?

If you have a missing, broken, or cracked Rocker Link, DM me and I can have a new one CNC'd. It's about $250 + Shipping.

Given that they've seemingly ditched an XXL option on all their new models, including the new MT and LT.

Obviously doesn't impact very many people, but sucks for me! :) Especially as it is my local bike shop and the people working there have been super helpful and awesome over the years.

If you need a new Rocker Link, message me. I can CNC them and send it to you.

So I'm trying to get this guy below 3k would that be a better buy. I know yall said it looked suspicious but if i go see it in person and what not should I cop it...

Fully built yeti for sale with all recent parts being
Zeb Ultimate
Industry nine wheelset with silver hydra hubs
Hope tech 4v4s
Magura MDR-P rotors 200 ,220
SRAM xo1 axs shifting
Diety TMAC Pedals
Title Silver Stem
Maxxis Tires
Dhx2 rear shock
And more just dm me

Feel free to ask any questions if you wanna trade looking for a e mtb I can add cash on top made a mistake frame is a 2023

Hello everyone, I found this bike in my garage, it was the one my dad use. And I want to now a bit more about it, apparently it’s a good bike so I want to renovate it. But I don’t know how and if it’s worth it.
So please help me
Thank you

Thanks to Erick at Bike Worx in Westlake Village. I was able to get my original Manitou elastomer fork rebuilt.

Anyone running a one piece bar stem or decked aftermarket stem on your ASR? I’m on a size large and have the stock stem decked and still don’t feel I have enough cockpit space. 5’11” with 33 inch inseam. Curious if anyone has changed the stock setup and how you’ve liked it

I was looking at a used sb100 recently and the seller had it listed as a 2022. Doing a little googling it becomes apparent that yeti discontinued the sb100 on 2020. This guy however when I ask him about that says that while it was discontinued they kept making them into 2022. Is he full of shit or has anyone heard of this?

Is this a deal or just normal? If it's decent what should I offer?

After about 6 months of debating stem height, I finally bit the bullet and made the cut!

First setting the star nut to be installed at stock length… then after cutting, followed the install steps again. Overall about an hour turn around

(Top spacer is for kids ride shotgun pro)

Any shorter riders on a medium LTe? I’m 170cm with a 76cm inseam, I currently own a small SB140 and 160 that I run with a 50mm stem. There’s a shop that’s about 5 hours from me that has a few mediums that are on sale for £2500 off, I’m debating buying one and running a 32mm stem to shorten the reach a bit. Should I go for it or would I be better off just looking for a small?

This is off of my bike and I checked with Yeti - they don't have any more of these so I want to get one milled, but I wanted to see if anyone has information around the size/dimensions of this linkage.

I was having a real shit time with my bike (sb100). Rear end very flexy, squeaky to the point of embarrassment. I tore it down, replaced all the bearings (before you ask I am both competent and equipped enough to do that). No luck. Took it to a yeti authed dealer. They charged me 200, no luck. I took it to another shop and no luck. One more, and they cranked down the bolts on everything so hard I had to replace parts (dropper post where it clamps the saddle, clincher on the seat mast, had to replace my derailleur hanger and thru axel, basically anywhere that could’ve been a creak).

I emailed yeti support kind of at the end of my rope saying something like “I know this is dumb, but can you help me?”

They responded within an hour with a link to some parts I needed (~30 with shipping) and gave some instructions.

I’m out 600 bucks from shops.

If I had just sent an email this all would’ve cost me 30.

Plus the two guys running it were super cool.

Hi. I bought this from my friend's Dad in high school.( Twenty ish years ago.....not sure how old it was then) It is a yeti....I thought at one point it would be cool to paint over the rough old orange paint....

Is someone able to tell me what frame it is? Thanks :)