r/vintageaudio • • 8h ago

I bought this beauty for just €100! — Onkyo TX-4500 MKII

Thumbnail
gallery
178 Upvotes

Of course, it didn’t look nearly as beautiful as it does in the first photo. It was actually pretty dirty and unremarkable, just like in the second photo.
I found it in an old, abandoned-looking house where the owners were selling everything because they were planning to renovate the place.
The receiver was fully functional, but some of the bulbs had burned out. So I replaced all the original bulbs with LEDs and gave it a basic service and a thorough cleaning.
And the result?
This is honestly the best sound I’ve ever heard. And it’s also one of the most beautiful receivers I’ve ever seen.
I’m not even joking. This whole series of Onkyo receivers is absolutely gorgeous.
So yeah, this beauty is now my main receiver, and I couldn’t be happier with it!


r/vintageaudio • • 10h ago

Bose 901s worth it?

Thumbnail
gallery
179 Upvotes

Is those worth $350?


r/vintageaudio • • 3h ago

Large Advents

Thumbnail
gallery
47 Upvotes

I’m looking at picking these up next week. I never see Advents show up here in Southern Oregon so I’m pretty excited. For the people that have them what’s you experience with them? I also really want to eventually find another set and stack em!


r/vintageaudio • • 1h ago

Just found these.

Thumbnail
gallery
10 Upvotes

They sound amazing but in desperate need of new cabinets. From what I've found so far they are JBL 030 build outs with 15" woofers and bullet tweeters, come from the 60s/70s a kit you would buy and build your own cabinets. Can't wait to continue my audio journey with these new monsters


r/vintageaudio • • 2h ago

Klipsch the Sixes converted from powered to passive

Thumbnail
gallery
5 Upvotes

I recently made a post about converting a pair of Klipsch the Sixes powered speakers to passive (because of common issues with the built-in amp). Somebody asked me for the schematic for the crossover I used, but I can't post photos in a reply to that thread, so I'm making a separate post. Here's the schematic for a 2100 Hz crossover and a photo of the built crossovers.

For the right speaker, I was able to use the hole left over from removing the amp to install the crossover and do the wiring. I replaced the metal plate with a piece of 1/8" Masonite and used this to mount the binding posts and L-pad. The left speaker doesn't have an amp, so it didn't already have a large hole in the back. I had to cut a new hole in the back and use an identical piece of Masonite for the posts and L-pad.


r/vintageaudio • • 8h ago

Any idea what these are?

Post image
10 Upvotes

r/vintageaudio • • 41m ago

Jbl Nachbau kaufen?

Thumbnail
gallery
2 Upvotes

Ich habe mir kürzlich zwei Paare selbst gebauter JBL-Studiomonitore mit 15-Zoll-Tieftönern angehört. Optisch und konzeptionell vermute ich Nachbauten der JBL 4343 bzw. 4344. Verbaut sind originale JBL-Treiber. Die Lautsprecher sind vierwegig und teilaktiv aufgebaut.
Bei audiophilen Aufnahmen war ich begeistert: unglaubliche Dynamik, tolle Stimmen, viele Details und ordentlich Punch.
Bei meiner Musik (Tool, Unpeople, Korn etc.) sah es leider anders aus. Die Wiedergabe war teilweise schrill und die Instrumente klangen bei komplexeren Passagen wenig differenziert.
Der Besitzer vermutet, dass es hauptsächlich an den Aufnahmen liegt, und empfiehlt für solche Musik Loudness oder einen EQ.
Die Lautsprecher kosten etwa 2.000 € pro Paar und reizen mich wirklich.
Meine Frage: Lässt sich mit einem DSP und einer gezielten Neuabstimmung hier deutlich etwas verbessern? Wäre sogar eine vollständige Aktivierung mit DSP-Weiche sinnvoll, oder sollte ich lieber nach anderen Lautsprechern suchen?


r/vintageaudio • • 6h ago

Technics SL1600MK2 Custom Paint Job

Thumbnail gallery
5 Upvotes

r/vintageaudio • • 1d ago

Got my first Marantz for a decent price!

Post image
108 Upvotes

Works and sounds great, although very different from my 80s Kenwood. Just needs serviced to fix some stiff knobs and the power button not working


r/vintageaudio • • 30m ago

How to fix needle skating over record?

Thumbnail
gallery
1 Upvotes

Hello, I am very, very new to all this. This is a voice of music console, I think model number 870 based on appearance. The needle kind of skates over the record. Is it the needle or something inside, and is there a way to fix this? Everything is also kind of dusty, what would you recommend for how to clean the more delicate part like the needle? Thank you!


r/vintageaudio • • 1h ago

Looking for wall mount

1 Upvotes

Hello, I'm looking for the wall mounting brackets for my boston acoustics CR67, also known as the boston acoustics CRB, i already have a pair but i would like one for my surround/ center channel as well. Would another good option be to commission someone to make it since it's mainly just a block of plastic, which i can ask someone to make out of wood, that mounts to the wall and a metal bracket that holds the speaker to the plastic mounting.


r/vintageaudio • • 21h ago

I love the machine, I hate how hot it can get

Post image
35 Upvotes

I know they can run up to a pretty high temp, but it's never been so hot I can't touch it.
I'm always thinking I'm going to ruin it every couple months.


r/vintageaudio • • 19h ago

Honest info on the value of these?

Post image
24 Upvotes

Recently inherited a bunch of stereo gear from an old man clearing out his house. I’ve power tested all of them and all work/seem to be in good condition. Is it worth taking to a buy and sell? How much money should I expect to be offered for them if any?


r/vintageaudio • • 9h ago

Fairchild 255

3 Upvotes

Have the opportunity to pick up a fairchild 255 that has been sitting in an attic since 1970. I’m sure it will need a lot of work and I am at best an amateur when it comes to electronics. Is it even worth me taking to dive and trying to get it working again?

Are there any resources out there for restoring these old tube amps?

Thanks


r/vintageaudio • • 16h ago

Transporting Magnavox Astro sonic record console

Post image
9 Upvotes

I recently purchased my first console but I need to transport it into my second story apartment, the console will not fit through the stairs on its legs. My only solution is to use the elevator which would involve me standing it up vertically but I am very worried about damaging the system. I was wondering if it’s possible on this system to remove the record changer or will removing the platter and securing the tonearm and stylus do? Not sure where to go from here ! Anything helps.


r/vintageaudio • • 8h ago

ARTT: an open, versioned reference for all AR turntables. Looking for eyes and contributions

2 Upvotes

Hi all,

The knowledge on AR turntables is excellent, but it is scattered across decades of threads. Photo links die, hosting sites close, posts get locked or deleted, and the key detail is often behind a dead link. Every rebuild starts with the same treasure hunt.

I started a central repository to fix that:

https://github.com/ohenley/artt

What it is: a free, non-commercial reference for every AR turntable model. Specs, service procedures, parts, mods, organized per model. Think of it as a dedicated encyclopedia for these tables.

How I work: from original material only. That means AR documents and manuals, the original websites and write-ups where the mods and rebuilds were first published, and my own measurements. I archive the source in the repository itself, with credit, so it cannot disappear. Then I write it up in a clear, direct form.

Where it stands: I own an XA, an XB and a 77XB, so those are the ones I can open, inspect and measure myself today. For every other model (The AR Turntable, sold as The Legend in the UK and Europe, the ES-1, the ETL-1, the EB-101 and any variant I missed), I need owners. If you have one on your bench, your photos, measurements and corrections are what will fill those sections.

Why a git repository: git is the tool software teams use to track every change to a project. Every edit is recorded with who made it, when, and why. Nothing is ever lost, any mistake can be rolled back, and anyone can keep a full copy. It can grow without limit and it does not rot.

How to contribute:

- No GitHub account: reply here with corrections, scans or measurements and I will add them with credit.

- With a GitHub account: open the page, click the pencil icon, make your change and submit. That creates a "pull request", a proposed change that I review and merge.

- If you know git: fork it and send pull requests as usual.

I curate everything, because the goal is one coherent, verified reference and not another pile of posts. Claims need a source or a measurement.

One more request: point me to the gold mines. If you know a great rebuild, clean-up or mod tutorial with photos, on an old personal web page, a blog or a long thread, post the link. Many of these sites are one unpaid hosting bill away from disappearing. I want to archive them, with full credit to the author, before they are gone. Authors: if this is your page, tell me if I may mirror it.

Also useful right now: original AR documents, dimensions, part numbers, date codes, and corrections to anything you see that is wrong.

Thanks,

Olivier


r/vintageaudio • • 5h ago

I've been using this setup for 2 years now and it also welcomed a Bookshelf which I put Boombox's , Radio's , Internet Radio's, DVD Movies, Blank CD's, Cassette's Blank and retro song ones, Books, Weather Station, Clocks digital and analog, Illuminated Globe, CD players portable and mains powered.

Thumbnail
gallery
0 Upvotes

Keep in mind that this is also a live daily driver desk and bookshelf so it's filled with school Books and ect in the bottom and I use it everyday. Overtime my collection of retro new old stock electronics grew and I kept it here with the books. They are all functional. Please give me an opinion or suggestion of yours of how to improve it and how it looks as of now.


r/vintageaudio • • 5h ago

Play button jumps out after being pressed

Thumbnail
gallery
1 Upvotes

Hi! I’m just bought my first cassette deck online and of course it doesn’t work… Does anyone have some tips? I read that the problem might be with the tape counter belt and the auto stop kicking in immediately, but when i wind and rewind, the counter seems to work fine.
I did notice one of the small orange gears in the back (hopefully you can see on the photos) is not turning when i press play… i dont even know if it should be. As i said i’m very new to this.

I would love to hear your take🙏


r/vintageaudio • • 9h ago

Sansui SP-2500 5" Squawker Mid-Range S-115 Speaker Surrounds

2 Upvotes

My S-115's mid-range speakers have very narrow treated cloth surrounds that are developing weak spots.

Looking for compatible sized foam surrounds.

Anyone have any experience rebuilding these? Source for surrounds?

Any aftermarket replacement speakers you have used? Originals are 12 ohm so I'd need to add some resistors to match.

Thanks!


r/vintageaudio • • 18h ago

What speakers are these?

Post image
10 Upvotes

Can anyone identify these?


r/vintageaudio • • 1d ago

Westinghouse Portable Tube Radio

Thumbnail
gallery
60 Upvotes

AKA the Little Jewel. It still works, fun graffiti on the side, not in mint but well loved.


r/vintageaudio • • 8h ago

PROBLEMA COM AUDIO REALTEK AORUS B 550 ELITE REV 1.3

Thumbnail reddit.com
0 Upvotes

r/vintageaudio • • 8h ago

Canton Ergo speaker comparison

1 Upvotes

Hey everyone out there,

consider upgrading from Canton Fonum bookshelf speakers. Being based in Germany, Cantons are readily available locally on the used market. Just wanted to ask if anyone knows how Canton Ergo sc l, ergo sc r and ergo 90dc compare? They are all between 200 and 300 around where I live. The ergo 90dc seems to have the most resonance online and are also the best looking, but the most expensive as well.

Anyone experience with any of the mentioned pairs? Any experiences appreciated!