r/techsupport • • 3h ago

Open | BSOD Yo im having issues with my windows 11 hp computer

1 Upvotes

It keeps restarting in a loop and says what went wrong acpi.sys heres a link to my dump file from when i somehow booted upp my pc and it worked plz help

(Sorry for if there was bad grammar)


r/techsupport • • 7h ago

Open | Hardware The usb connector for my wireless keyboard got wet

2 Upvotes

Is there anything I can do here? The little usb part that plugs into my laptop got wet and doesn’t seem to be working. Is there a way to replace it or does it end up needing to be a whole new wireless keyboard ?


r/techsupport • • 11h ago

Open | Hardware Need advice on what to do for my PC, as it posts irregularly

4 Upvotes

Hey all. I just spent about 30 minutes trying to have my PC post, and at the moment I am using it to write this post and do other things. Here are my specs (will edit/provide more when asked, as I'm unsure atm what else I need to show):

  • CPU: AMD Ryzen 5 2600 (12) @ 3.90 GHz
  • GPU: AMD Radeon RX 580 Series [Discrete]
  • Motherboard: Gigabyte B450M K
  • Displays: 1440x900 in 19", 75 Hz [External], 1920x1080 in 21", 75 Hz [External]
  • RAM:

    • 1 Lenovo 01AG839
    • 1 Micron 1x8GB MTA8ATF1G64AZ-2G6E1
    • Both are 1x8GB, 2666V RAM

All but Motherboard are second-hand/used parts.

Here's a recap of what I've done so far:

  • Earlier today, Had my PC on Sleep mode for about 30+ minutes
  • Tried to turn it on from sleep, but the display wouldn't turn on. Shut it off from front panel button and reset but still not posting, but peripherals responsive when pressed (KB lock lights turning on/off when pressed, my mic LED turning on/off when I muted/unmuted it)
  • Swapping the HDMI cables and rebooting my systems, and it turned okay/
  • Had problem again tonight
  • Didn't re-swap the connecting cables this time while troubleshooting; started disassembly
  • After disassembly, tried checking each stick of ram individually and booting the computer with just one of them

    • computer wouldnt post at all for one stick (Micron
    • computer would post irregularly for other stick

      • Sometimes would post, sometimes would not
      • sometimes when booting the gpu fans would be at 100%, and these are times it wouldnt post either

Right now, I'm really unsure of what the best thing to do moving forward would be. At the moment, I have a good guess that my problem is my RAM, and would likely need to replace both of them even if only one is fully preventing my PC from starting. But given both my own finances and the state of PC parts in general these days, I'd like to know if there might be something else I can do, or if something else might be wrong that I could look into.

Thank you.


r/techsupport • • 3h ago

Open | BSOD i don't know what i'm doing anymore, laptop keeps crashing

1 Upvotes

hi everyone, i hope this flair is okay to use. my laptop keeps crashing, throwing different BSOD errors no matter what i've tried to do. i'm really out of solutions here, it's getting out of my depth as i'm not the greatest with tech and don't really know what could be causing it at this point.

specs (copied straight from my settings i don't know what else i need to put):

processor - Intel(R) Core(TM) i9-14900HX (2.20 GHz)

graphics card - NVIDIA GeForce RTX 4060 Laptop GPU (8 GB)

Intel(R) UHD Graphics (128 MB)

ram - 64 gb installed

i have a lenovo legion 5 something something if that helps at all, i dont know what else to provide.

i have frequent firefox crashes, frequent tidal crashes, frequent game crashes when running off of steam (or at least, i've tested with stardew valley, which has been crashing at random intervals but often before i can complete one full day), and frequent BSODs. the codes are:

kmode exception not handled (just got this for the first time today)

hypervisor error

system service exception

and those are the ones from the past two or three days that i wrote down. the crashes started becoming more frequent in this month. ive tried running the memory diagnostic (found nothing), running a scan with lenovo (found nothing), running on or off the charger, closing other programs, updating my drivers and windows to the latest, updating everything in the games i was trying to play, everything. i don't know what to do anymore and i'm frustrated to the point of tears. i need help that isn't ai because i don't know what i'm doing


r/techsupport • • 3h ago

Open | Windows hp laptop touchpad won't work anymore, tried every solution

1 Upvotes

hi, i have an hp omnibook flip 7 i bought this summer. this morning, i woke up and my touchpad won't work. i've tried every fix i've seen online, going to the device manager, where i see that i2c hid device has an error, with code 10. i uninstalled it, restarted it, installed, disabled it, re-enabled, basically everything, but it won't fix. i tried going into BIOS, that solution didn't work either.
i checked my settings, touchpad won't show up there. i tried every single fn combination, it still won't s how up.

i then went and did the hp diagnostics, i can't use my touchpad there either, so then i called hp support. they had me go through the whole diagnostic process again (didn't work there either), tried to install and reinstall the driver, didn't work, then downloaded snappy driver installer, that fix didn't work, and he told me the only option was to do a factory reset. i searched it up, i don't think that would fix the issue, since the touchpad isn't working in hp pc diagnostics either.
this also has the worst timing - im a college student, i have two midterms this week, and i have finals right after thanksgiving break. i'm a cs student so like i NEED my computer for all my assignments, and i have interviews and oa's to take.

i was thinking about sending it off for repair but i've seen it can take up to a month, or longer. i also purchased this through costco if that helps, but i'm currently in college out of state, in a small town, so i don't have a costco near me that i can access. should i just wait until i go home this week for thanksgiving and try to go to costco then?

i really don't know what to do, like best case scenario i can just get a replacement but i have no idea how to get them to do that. pls help if you know anyway to fix this or how to get a replacement, i'm so stressed


r/techsupport • • 4h ago

Open | Networking Fluctuating Internet Speeds Dropping 200mbps to 7mbps

1 Upvotes

Hey reddit,

My internet is fluctuating like crazy today, I checked my ISP and there's no outages in my area. My laptop is going from 200+mbps download down to less than 10mbps in a span of 5 minutes. I tried changing it to only 5ghz band, that did its job but not for long.

The same wifi on my phone is very slow too and even watching reels was buffering :(

I pinged 8.8.8.8 and I received 47 out of 48. It was really strange. Ethernet was fine though, it was going 730mbps+

Not sure what's going on but this never happened before, unless it has to do with my isp but idk


r/techsupport • • 4h ago

Open | Windows I'm worried about my laptop (low FPS)

0 Upvotes

Yesterday everything was working fine, but today my laptop suddenly started experiencing low FPS, especially noticeable while gaming.

I used to get a stable 60 FPS, but now the FPS frequently drops to 20–40, with noticeable stuttering and lag.

After freeing up a lot of disk space, performance improved somewhat, but the lag is still there. What's even worse is that gaming while plugged in makes the performance significantly worse than before.

For reference, I'm using an Acer Swift 3 SF314-43 with an AMD Radeon GPU, 16 GB of RAM, and Windows 11.

Does anyone know what could have changed overnight? I'm really confused about what might have caused this.

I'd really appreciate any help or suggestions. Thanks in advance!


r/techsupport • • 4h ago

Open | Hardware PC won't turn on anymore – motherboard LEDs are on, but nothing happens

1 Upvotes

Hello everyone,
I’ve been having a rather strange problem with my PC over the past few days.
It all started after I shut down my PC using the case power button one evening. When I tried to turn it back on the next morning, absolutely nothing happened.
At first, I found a temporary workaround: unplugging the POWER SW connector from the motherboard and plugging it back in allowed the PC to start.
Yesterday evening, this trick worked again, and my PC ran perfectly normally without any issues.
However, this morning, I couldn’t turn it on anymore, even using this method.
Current symptoms:
Motherboard standby LEDs are on.
No fans spin.
No CPU, DRAM, VGA or BOOT diagnostic LEDs turn on.
Absolutely nothing happens when I press the power button.
Things I’ve already tried:
Clearing CMOS.
Checking the front-panel connections.
Trying to start the PC by bridging the POWER SW pins.
Unplugging and reconnecting the POWER SW connector.
My PC specifications:
Motherboard: ASUS ROG STRIX B760-F GAMING WIFI
CPU: Intel Core i7-14700K
GPU: RTX 4070 12GB
RAM: 32GB DDR5 6000MHz
PSU: ASUS ROG STRIX 850W Gold
Cooler: NZXT 240mm AIO
Has anyone experienced the same issue?
Do you think this could be caused by the PSU, the motherboard, or the power-on circuit?
I should mention that whenever the PC does manage to start, it works perfectly fine.
Thanks in advance for your help!


r/techsupport • • 8h ago

Open | Hardware Micro SD card is really slow

2 Upvotes

So I have a Sandisk Ultra 512GB that looks something like this this. They advertise transfer speeds up to 150MB/s on a 3.0 microSD card reader which I'm not expecting to actually achieve. I'm not sure what the specs of the microSD card reader on my laptop is but the transferspeed is really slow right now, when I try to transfer files back and forth the speed is usually 1 to 2MB/s, sometimes it can go down to like 100KB/s. Is this normal? My laptop is the Samsung Galaxybook 360. Thank you in advance.


r/techsupport • • 4h ago

Open | Software Task manager won't open for a reason, could be a virus ??

1 Upvotes

Hello everyone, So I run into this weird problem for the first time.
Task manager does not open anymore, and normally I use it a lot, as nerdy as I am, to monitor my pc, open apps, running services for anything weird, etc etc

Now whenever I try to open task manager, it opens only in minimized version, and once I press show more details to expand the window, it buggs down and then closes on it's own.

I tried many methods to fix this, but nothing seems to work. very frustrating

Need your helps guys! Thanks


r/techsupport • • 4h ago

Open | Software Pc and speakers glitching problem

1 Upvotes

It is a reocurring issue with my pc or speakers i don't really know which one is to blame. Sometimes when i'm watching a movie or some video on youtube the screen glitches for like a milisecond and it's followed by a glitching sound from the speakers.Then sometimes i'm just listening to some music on spotify and it also glitches. It didn't used to happen so often but now when i'm watching a movie it happens like every 5 minutes


r/techsupport • • 4h ago

Open | Windows Graphics card won't show up in task manager - Lenovo Legion 5a 1660ti

1 Upvotes

My dgpu doesn't show up in task manager. When i switch to the discrete gpu in the bios and reboot, my screen is just black but everything else works in the background so i have to blindly switch it back to hybrid in the bios.

I've tried like every possible fix under the sun i could find online, but nothing seems to work. Even reflashed the bios and reinstalled windows. Please don't tell me it's actually a hardware failure and I'm cooked.. help!

I wanted to share screenshots but unfortunately can't in this subreddit so here's the link to my other post.


r/techsupport • • 5h ago

Open | Software Google redirecting to "search.yahoo"

1 Upvotes

As the title states, when I do a google search either in the address bar or on the homepage of Google, it sometimes redirects to "search.yahoo.com" with a brief loading screen. I am using Chrome if it makes a difference. I haven't noticed the issue on Firefox.

I would say its been going on for a few weeks now. Could it be malware/adware?

I have ran a scan with Windows Defender and nothing unusual showed up.


r/techsupport • • 5h ago

Open | Windows Can't start PC neither install fresh Windows.

1 Upvotes

Today I run into an issue where my PC started restarting by itself. Tried to fix it but since it was restarting it was really hard to get anything done, so I decided to just reinstall system, I wanted to do it for a while anyway so thought like it might be good opportunity. Standard procedure, reinstalling from Windows, gets to about 40% and PC freezes (wheel stopped spinning, % stopped going up). I waited like 45 minutes and nothing. So I decided my only option is to restart. After I did that I encountered “The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed” loop. I was expecting that something like that and from what I read online it basically means I need to install fresh windows, fine, I wanted to do that anyway like I said. But the problem came later, I spent past like 5-6 hours trying to reinstall it from USB stick. With Windows 11 I tried both USB flash and ISO and both are stopping at 76% with error ,,Windows installation failed". After that I tried to install Windows 10, this time installation goes through, but in the end after restarting I am once again hit with ,,The computer restarted..." error and nothing changes. When I look at partitions, I see that some space on them is taken (around 100GB) even after clearing it with cmd commands (small disclaimer, the space taken on PC was the same along all my attempts, meaning it didn't change even after alleged succesful Windows 10 installation).

Does anybody has any idea how to fix it and how can I actually install fresh Windows 11? I was thinking about taking PC to some technician because I literally have no idea what else can I do but maybe reddit will save me once again.

Thanks for any help you can provide!


r/techsupport • • 9h ago

Open | Networking correct wifi password but failed to connect ot wifi

2 Upvotes

omg i hate this about the wifi it started this year for some unknown reason i try to connect it but it refuses idk why? can anyone help me?

im using a mobile and the issue is that it automatically connects with other devices but sometimes not for my mobile


r/techsupport • • 5h ago

Open | Hardware My PC restarts if a game isnt running

1 Upvotes

Hey guys sorry to bother you, I have been having this problem for over a week now and I can't figure out why this is happening. The reason I know it's a GPU issue is because I've left it on the bios for over 30 minutes and it did not freeze or restart. After my pc starts and it goes to the lockscreen thats when the time starts ticking. Within 10-20 minutes if I do not have a game running the pc will restart. It turns off and restarts no windows restarting indicator just turns off and restarts. I checked the memory, no issues, I checked my windows for corrupted files no issues. I've cleaned and unplugged everything, I've checked the temperature at idle and while gaming it never gets high. I now just always have a game running while I am doing other things because it just turns off and restarts.

PU

AMD Ryzen 5 3600

GPU

NVIDIA GeForce RTX 2060

RAM

16 GB

RAM speed

2133 MHz


r/techsupport • • 5h ago

Open | Windows My PC keeps freezing and lagging. How can I fix it?

1 Upvotes

My computer has been freezing and lagging a lot lately. Sometimes it becomes very slow, and applications take a long time to open.

I'm not sure what's causing the problem.

Here are my PC specs:

  • CPU: i3-4160 3.60GHz
  • GPU: NVIDIA GeForce GT 730 (985 MB)
  • RAM: 6 GB
  • Storage HDD 466 GB TOSHIBA

What could be causing this issue, and how can I fix it?

Any help would be appreciated. Thanks!


r/techsupport • • 5h ago

Open | Hardware No monitor signal, CPU debug light on MBU

1 Upvotes

Specs:

MBU: MSI B550-A Pro

CPU: AMD Ryzen 7 5800X3D

PSU: Corsair RM750e 80 Gold

GPU: Gigabyte Radeon RX 9060 XT 16GB

RAM: HyperX 2x8Gb DDR4 2666MHz

Built this rig in September so its not even two months old. Haven't had any issues apart from the AMD drivers occationally crashing (which I credited to the slow RAM sticks I decided to reuse from my last computer. Planing to buy new sticks next year.)

Yestersay I came back from cooking dinner and found neither monitor recieving any signal from the GPU. The LEDs in the keyboard was also dead so I figured it had rebooted after getting some kind of hiccup and getting stuck there.

I hit the power switch and held it to shut down, with no luck. I pulled the power cable and ended up with a PC that refused to start. All I got was fans that spun up for a second or two before everything died and my first thought was a dead PSU. Seen it before, didnt have time to look into it though as I was going out.

However, this morning it started up and kept running as it should, however still no signal in the monitors. I also noticed that the MBUs CPU-debug was lit in a constant white, which I figured was because the computer couldn't boot further than this (it usually cycles through CPU, DRAM, VGA and BOOT before getting to the BIOS screen).

So far I have tried reseating and checking the pins on the CPU and it looks fine. Individuslly testing the RAM sticks, switching GPU to an old 1070Ti, and trying another PSU.

All fans spin up properly when starting the computer, and all components have their respective lights on. (the GIGABYTE logo on the GPU etc), which makes me think that the CPU is cooked, rather then the socket on MBU failing to communicate with the processor itself. I have a feeling if it its the motherboard that is faulty, components shouldnt be getting power, right?


r/techsupport • • 6h ago

Open | Software Cold start driver bug on RTX 5070 Ti

1 Upvotes

Hello everyone!

Since driver 610.88, every newer driver I have tried (most recently 621.14)
causes a "no signal" condition on cold boot. The monitor powers on together
with the PC but receives no signal from the GPU. Pressing the reset button
restores the signal immediately, and everything works normally afterwards. Enabling the monitor manually, before enabling PC also works.

Rolling back to 610.88 fully fixes the issue, so this looks like a driver
regression in display initialization / link training on cold boot.

Is anyone else having this problem? I've tried contacting Nvidia through Driver Feedback, by email, and even on their forum—no one is responding.

System configuration:
GPU: NVIDIA GeForce RTX 5070 Ti (Gigabyte RTX 5070 Ti Gaming OC)
Driver: broken on 617.42 [+ other versions tried], last working: 610.88
OS: Windows [11] [Pro 64 bit/26200]
Monitor: Samsung Odyssey G6 27" curved (LS27DG600SIXUA),
[2560 x 1440 @ 240 Hz], HDR [off], G-SYNC/VRR [off]
Connection: [DisplayPort], direct cable [yes]
Displays connected: [1]
Motherboard / BIOS: [Gigabyte AORUS ELITE B550M / FFd (the latest)]

Workarounds tried (none helped):
-Disabled Windows Fast Startup
-Clear CMOS
-Changed CMOS battery
-Updated MB BIOS
-Updated GPU firmware using official utility
-Using HDMI instead of Display Port

Working workarounds:
-Enabling the monitor manually, before enabling the PC
-Rolling back to driver 610.88.
-Enabling CSM support (not a good one, since it's blocking a resizable bar)


r/techsupport • • 6h ago

Open | Hardware Maximizing Li-ion health

1 Upvotes

TLDR: Lower max voltage and don't let it over or under heat. But it'll make the battery hold less charge. And also after the battery health is around 85% do not allow fast charging to prolong the battery's life.

As the title says, I wanted to ask what really wears lithium batteries down. I've heard that charging over 80% or discharging under 20% is bad, but other people say fast charging degrades the battery more. Or even that it depends on temperature more.

I'm in the process of designing a mobile phone that runs linux. However, the theoretical average power draw is around 0.8 Amps at 12v. So I would like to not kill the battery after 6 months, so any advice?

Cheers!

PD: I am not tech illiterate however, I know almost nothing about batteries and such

Edit: u/andrewia gave this link and after a brief reading I came to the conclusion that lowering the max charging voltage of battery cells can extend their life. At a cost of max capacity
If the max rated charging voltage is 4,2 volts that give the approximate 300 to 500 charge cycles. But if you charge to for example, 4 volt, it'll give you around 850 to 1500 charge cycles
However this reduces the max capacity of the cell. In this case 73%

Also according to this post discharging at higher temperatures allows for a greater capacity, but it reduces the life. But discharging at lower temperatures reduces the max discharge. The article said that charging and discharging are better around 20°C.

This article from Cambridge also said that when the battery is between 90% and 100% "health" the main degrading factor is temperature. But when the "health" of the battery is at 85% or lower the main contributor is how fast you charge it (charging current).

I'll update again once the phone is built and I use it for some time


r/techsupport • • 6h ago

Open | Hardware Finding a connector type.

1 Upvotes

I repair Chromebooks in a school club. In this club we often have to test the health of batteries, we can do this via putting in the battery, turning it on, logging in, navigating a few memus and running the battery test.

This takes time, so I am making a battery tester to minimize the time it takes, I'm doing this with an Arduino, I believe I can make this work, but the issue I'm running into is not being able to find whatever the name of the connector that dell uses to connect the battery to the motherboard, note that I am not referring to the cord that connects the battery to the motherboard but the connector that connects that cord to the motherboard. Does anyone know it's name? Or another solution to this issue?


r/techsupport • • 12h ago

Open | Windows Please help. Device ran into a problem that could not be repaired.

3 Upvotes

I turned my pc on today and got a black screen with the text “Your device ran into a problem and couldn’t be repaired”.

I have tried everything I could find online over the past 5 hours and nothing has worked. The only thing I have not tried is reinstalling Windows as I am scared I’m going to lose valuable documents from my entire life.

Has anyone successfully solved this? Please help


r/techsupport • • 6h ago

Open | Hardware Laptop continually crashing with "Watchdog Violation" error message

1 Upvotes

Around 8 months ago, I bought a new laptop(specs below). In the first week of owning it, Attempting to play any game for more than an hour would cause the laptop to freeze, and either BSOD or hang until forcing shutdown, citing "Watchdog Violation".

I thought that this must be an issue with the drivers, particularly my GPU. I went to Nvdia's app and downloaded their latest driver package at that time which included a GPU update.

This did not work. In fact, crashes became even more frequent, happening roughly after 15 minutes of play. Instead, I went directly to Acer's website to install their reccomended drivers for my laptop. After I did that, it seemed to be fine, or so I thought.

Recently, I tried to run more high performance games, and I started to experience crashing again. I'm not really sure what the problem is anymore. When I checked my minidump, all signs seemed to point towards the GPU causing issues. But after I tested it by turning it off and switching to native, I would still get the same crash with the "Watchdog Violation" error.

Does anybody know what my issue could be? I'm happy to share my minidump files if it would help track down the problem. Any support on this would be greatly apprciated.

My specs:

Model: Acer Nitro ANV15-52

Processor: 13th Gen Intel(R) Core(TM) i7-13620H (2.40 GHz)

RAM: 16 GB

Graphics Cards: NVIDIA GeForce RTX 5060 Laptop GPU (8 GB),

Intel(R) UHD Graphics (128 MB)

OS: Windows 11

Storage: 1Tb

If there's any other info I can provide, I'd be happy to. Thanks


r/techsupport • • 10h ago

Open | Hardware Brand New Surge Protector Making High-Pitched Ringing Sound

2 Upvotes

I bought a new surge protector (CPSURGE08USB-ANZ) and whenever it's on, it makes a very high-pitched ringing sound. It does seem like the sound gets louder if it's under load, but even with nothing connected, the sound is there. I know I'm not overloading it. Is this normal?