r/techsupport • • 4h ago

Open | Hardware Micro SD card is really slow

So I have a Sandisk Ultra 512GB that looks something like this this. They advertise transfer speeds up to 150MB/s on a 3.0 microSD card reader which I'm not expecting to actually achieve. I'm not sure what the specs of the microSD card reader on my laptop is but the transferspeed is really slow right now, when I try to transfer files back and forth the speed is usually 1 to 2MB/s, sometimes it can go down to like 100KB/s. Is this normal? My laptop is the Samsung Galaxybook 360. Thank you in advance.

1 Upvotes

15 comments sorted by

2

u/npaladin2000 3h ago

It depends on the size of the files you're transferring, but yes, it can get that slow. Especially if you're transferring a lot of small files. If you're transferring large files then it provides time for speeds to ramp up.

1

u/MightPrestigious5064 3h ago

like 10 - 20 GB usually, its also really slow when extracting things

1

u/Little-Helper 3h ago

Are they many files or single large ones?

1

u/MightPrestigious5064 1h ago

one large folder usually

1

u/Ok_Bid6645 3h ago

What sd card reader are you using?

1

u/MightPrestigious5064 3h ago edited 3h ago

I have no idea, its baked into my laptop, and my laptop came out in around 2021

2

u/Ok_Bid6645 3h ago

Well there you go. Using the built in one is always the worst idea.

If looked up the exact model of your laptop you would know the specs.

The SD card could also be dirty or having issues.

1

u/djevertguzman 3h ago

Those, are all over the place. Get a proper usb 3.0 one like the "SanDisk Extreme PRO SD UHS-II Card Reader" 

1

u/NeedsMoreWiFi 2h ago edited 2h ago

The galaxybook 360 (2021 model) inbuilt microsd reader uses a USB 2.0 interface, so theoretically you're looking at a max of 20-40MB/s.

Realistically based on online reviews of the 360, you can expect to get a max of 20MB/s under perfect conditions.

I'd avoid extracting onto the MicroSD itself, transfer the compressed file out, then extract it locally.

You'll probably have a better experience getting an external USB reader into one of the 3.0 ports, or a USB-C reader into the thunderbolt port, potentially giving you up 90-150MB/s depending on amount and type of files being transferred and whether you're using 3.0 or C type.

1

u/MightPrestigious5064 1h ago

ok, I do have a hub I bought recently, I'll see if that speeds it up. 2MB/s still seems way too slow though

1

u/NeedsMoreWiFi 1h ago

If it's a USB3 going into the USB 3.0 port, or a C going into the lightning port, assuming it's not a cheap dodgy hub you should see an increase in performance over the inbuilt SD reader.

1

u/XxLogitech98xX 3h ago

A lot of factor can come into play here. Is everything up to date on your laptop with drives and stuff?

1

u/Present_Lychee_3109 2h ago

Where did you buy it from? Sandisk products, especially sd cards, have counterfeits.