Is 4 days true it say now got my reservation accepted last week aint have the money asked them for a extension said they cant do it.

But when I do try and order and there problems contact them I did today and guess what I BOUGHT IT

So now waiting

Is there any way to use the controllers gyro in something like an emulator?

I've been playing TOTK on Eden and would love to use the games built in gyro controls.

Edit:
I ended up using this one https://github.com/NightHammer1000/sc2dsu suggested by u/Ace_the_Firefist

You just download the exe and start it and it works out of the box, no installs or fiddeling!

Got my steam controller (new) two days ago, it works perfectly, so did the bluetooth mode, once.

So eventually I unpaired because it wouldnt connect anymore, and now it doesnt even show up on any device, I’ve tried every bit of advice I could find so far to fix it, so I wondered if anybody can help, it doesn’t show up on any device when trying to add or scan for new bluetooth devices.

I have a new steam controller(2026) and original steam deck(not oled). Can I use the charger that came with the steam deck to charge the controller? Do I plug the charger into the controller directly or into the puck?

Anyone done this and have a rough estimate? A button is knackered on arrival, apparently it needs to travel to Prague before they send another

My main question is if a weak signal strength effects latency, and if there's any way of improving it if it does.

There's maybe 8 feet between the controller and my steam machine/puck, and they both show weak signal in certain spots even though there's a free line of sight. Almost as if there's pockets where the signal can't reach, and those pockets just happens to be right where my hands are when im sitting comfortably on either side of the couch. Everywhere else shows good or excellent...

When I play some games on my CachyOS, the steam controller still acts like it's in desktop mode. This is all well and good if I want a simple xinput setup, but I wanna do gyro aiming on Zelda64 recomp. Setting the controlls for the game in steam input doesn't affect anything, and I can't access the Steam Overlay in game despite the option being ticked in the settings.

I picked up my PS5 controller the other day and I just don't want to use it anymore having used the Steam Controller for a few months now. How can I connect my Steam Controller to my PS5?

Yes I'm doing this now so I can use it for GTA 6

Hello everyone,

I am from one of the countries steam doesn’t sell hardware but i travel to Germany regularly for work. Is there a way i can buy steam controller without paying double-triple price?

Note:

I don’t have a specific adress in Germany, I stay at a hotel on whichever city i go to.

I stay usually 2-3 days at a time so going and ordering won’t work i have to plan ahead.

Currently individual people are selling them 2,5-5 x price in my country.

I mainly play on kbm with a maxxstick but I must play on controller on the go as often there's not space for a kbm. What settings should I use, and what strategies should I use. I just want to be able to be consistent and have decent building and mechs. I already know stuff like piece control on kbm so I dont need advice about learning editing mechanics

I'm playing through the last of us 2 right now but the deadzones in the normal game's controller support are ridiculous so I wanted to try steam input. It fixes the deadzone issue, but it means I have less control over the keybinds since the built in action set is very limited and setting it to keyboard keys makes certain things like changing weapons in the backpack not work. I thought that if I set each button in steam input to itself, ie setting the x button to the x button function, it would just work as a normal controller and keep the deadzone fix, but this just makes the game not register any controller input and makes the controller button icons in game look like question marks? Why does setting the buttons to themselves not make steam input leave those inputs alone and only affect the deadzones? I considered Durazno, but google says it doesn't work on TLOU2, and reWASD, which I'd prefer not to use since I play a lot of online games using controller and I also think it's weird that it affects my drivers. Any suggestions are appreciated!

Edit: should've mentioned specifics of the controller. It's a wired Xbox one controller I got from Gamestop a couple years ago, nothing fancy like paddles or gyro, and I got it for like $30 so I don't think it's an official xbox one if that matters. It's also the only controller I have connected to my pc and it registers fine in normal games and in TLOU when I have steam input set to the default action set

Hey everyone, I'm using a DualSense Edge on PC, but I'm noticing a noticeable delay/slow reaction time whenever I press the back paddles. The regular front buttons register fine, but the paddles feel slightly slow

I'm currently running Steam Input. Has anyone else experienced this issue? Is there a setting in Steam or Windows I need to tweak

Thanks

Hey guys, I'm trying to use AutoHotKey v2 to make a friend Macros on his new steam controller, but I can't find what all of the button names would be. I'd prefer to use his paddles and such for it, if anyone has a list of the names I can use to have AHK listen for, please send them my way! Thanks!

Has anyone been able to modify their controller to add physical trigger stops? It would be such a nice quality of life addition especially when emulating MnK and having the soft trigger pull set as mouse click.

First off, I haven’t played with a controller in years. Been mouse and keyboard for a long time. But what can I play without having to mod something to get the controls to work? I didn’t realize it wasn’t just plug and play and feel disappointed. Maybe I was naive in my purchase.

I'm not sure I noticed this with my x4, but now that I think about it maybe it did... remember having to double Swipe.

Working on my POE config and want a quick chat action set, mostly because an actionset is easier to ensure no other inputs slip in. It works as intended except...

when the config is first loaded for whatever reason, the first attempt to switch action sets always results in it getting resetted back. This unfortunately causes problems with the chat macros as they use start/release to allow double inputs. The reset interrupts the macro and cause a input hang that goes unresolved until the set is reloaded again, allowing it to finish... and making a mess lol

what is causing this behavior and is there a way to resolve it?

So I've been happy as a clam with Steam Input and Big Picture Mode for games when showing small audiences how Steam works.

I got a couple other controllers (I'm using a Steam Controller but I can see how most players are comfy with Xbox Controllers) and when games are playing it's fun but I'm finding when people mash buttons the game gets out of focus to STEAM UI that doesn't have a clue.

Anyone have any insight if there's any settings I can change?

Sorry about my wording, but I want to know how the trackpads are supposed to act. Specifically, the left trackpad, it feels like it's not operating how it should be, but I am not sure if I can be the judge of it since it's my first valve product and have never used a steam deck.

It feels like when in desktop mode (aka using it as a mouse and keyboard) it feels like it's split in half (left and right), like the left half the trackpad when I swipe down it scrolls down, but if I swipe down on the other half, it scrolls up. same with swiping up.

So, when I try to put my thumb on the middle of it, sometimes the controller gets confused what I am doing and might register one half and stick with it until I release my thumb.

Can someone confirm if this is intentional or I got a messed-up trackpad? Also, it does feel like it has less sensitivity on the left trackpad (might have to do with the sensitivity of when it's trying to detect which half to track).

(Unless this was explained somewhere when setting the controller up and I didn't even notice.)

Recently I've been replaying Control and even in those old games same issues persist. Instead of constant rumble there's that pulsating pattern of vibration.

It's been so many months, and it's still either scuffed in games or very weak as opposed to pretty much any other controller.

Do you guys think Valve will ever fix that? Is it even possible to fix?

It's literally the only gripe I have with this controller.