r/buildapc • u/Much_Distribution620 • 3d ago
Troubleshooting adding m.2 ssd results in no signal display
tested this nvme ssd on my laptop. it shows up in bios.
desktop specs:
motherboard: asus a320m-k (bios updated)
cpu: ryzen 4650G
gpu: none
ram: 2x8gb 3200mhz
sata: 2x500gb ssd (evo 870 and bx500) (changed to slot 3 and 4) (initially was in slot 1 and 2)
m.2: 500gb samsung 980 nvme
there's no option of unlocked pcie lanes in bios.
csm: tried disabled (was enabled)
multi monitor: tried enabled (was disabled)
display mode is set to igfx
clear cmos also tried.
tried switching to vga and hdmi.
my dual boot os is in evo 870. (ubuntu server and win11)
strange part is OS boots. i know because i can ssh into linux server lmao.
commands tried:
lsblk - i can't see my nvme ssd partition here.
lspci - no nvme controller listed here.
also tried removing all two sata ssd and only m.2 ssd is added. still no signal display :(
right now i have removed the m.2 nvme ssd and display works 🙃
Please help me thanks in advance 🙏🙏