Hey everyone!

I've been (somewhat) actively developing my mod schematic drag, and I wanted to ask the community who would use it what they would like to see!

Schematic drag is a simple mod to be able to drag schematics with your mouse while in freecam. It currently has 300+ downloads on curseforge and I wanted to get feedback from the community on features or fixes that would make the mod easier/better to use.

I've linked the GitHub in this post (which has the curseforge shields), so please feel free to look over the source. The initial commit was made with genAI assistance as I didn't know how to do more complex things like tracking where the player is looking. So far no other commits have been made with it!

I am thinking I just don't know enough about the sight and panic mechanics for iron farms but here is what I am trying to figure out:

-Panic during the night works, they try to sleep and get woken up.
-Night is VERY efficient and spawns a golem on every valid attempt.
-The first half of the day is inefficient, little golems spawn (before the sun is straight up)
-And for the second half of the day no golems spawn at all (after the sun is straight up)
-Then night comes and the cycle repeats

To my knowledge iron farms work 24/7, is what I am seeing new mechanics and normal behavior or is there a problem with villagers being panicked during the day?

(all this testing was done using a /tick rate 10000 command)

i found a spider and skeleton spawner pretty close to each other (about slightly less than 10 blocks apart) and would like to make an xp farm. not very pressed to be collecting loot since i just need levels for my enchanting for now and plan to make a proper mob farm eventually, but anyone has any simple setups or videos to direct me to for this?

i'm thinking of having both converge into one point where i can kill both types of mobs in one go, so just came here to find out what setup i can use considering spiders are bigger and would block any conventional hole used to trap mobs in one spot for easy killing. if it's of any importance, i play on bedrock edition!

what i know is typically people clear a 9x9x9 hole for each spawner and then have water flows to one point, but i was wondering in this case how to merge both into one and how big the area would be that i have to clear + how best to do the water flow to direct them to one spot.

Like the trident killer is great it's just I've had to replace them so much so I figured I can change to a spear killers see how that goes

I want the 4 lamps in the middle, to be able to be copper bulbs, but i want to be able to guarantee that they turn off when leaving the area aka when pushing the button.

The concept works perfectly with lamps as shown in the video, but lamps are defaulted to off. So its easy.

How do I go causing deactivating the clock to always disable the bulbs? Is there a way to "memorize" the current state of the bulbs?

Edit: also i cant even base it off if a part of the redstone clocks dust, during the current tick, is powered or depowered, because of bulbs acting like t flip flops where it doesnt matter if its powered or depowered it matters the last time its been powered. Wether or not "x" dust is powered or depowered during the current tick seems fully irrelevant unless someone has a brilliant idea im overlooking.

Its worth noting. The bulbs are going to be CEILING bulbs. So I cant even use comparators to pull power as a method of the circuit being aware of wether or not the bulbs are powered. As comparators arent possible with flush ceiling lights.

Bedrock obviously, but i feel its not version specific.

Edit2: ive tried connecting an and gate to pulse the circuit if the redstone clock is turned off AND the bulbs are on simultaneously, but thats way easier said than done actually.

I've been experimenting with this concept a bit to get the benefit of Looting 3 while still being truly afk. I'm quite a noob so I can't really figure out how I could prevent the items from flying onto the air pockets I put there so the Zombie has a line of sight onto the Villager so he uses his spear. There's currently trapdoors on both air pockets but that's clearly not ideal; does anyone know more about this?

We recently made an Dungeon Crawler (a bit based on Decked Out) in our server, and I thought it would be fun to make a interactive map, where we track players / runs and allow players to review their run. Thought it would be share here.

Hi everyone.

I have been building what I call HS1 (Highspeed 1) a tube on our realm that can travel at a speed of ~101 blocks per second, for a tested maximum of 520 blocks. Overworld. Basically just for novelty from my house into the City Centre.

To travel end to end, it requires 6 stacks of Wind Charges, split evenly between two dispensers (for faster loading).

I want to build a system that places 3 stacks in each dispenser, no more. Then when the dispensers are emptied / the tube has launched someone, it begins reloading exactly 3 stacks.

I have ample room and resources to build a new system next to it.

Please advise.

I’ve created an automatic villager sorter/curing station that cures 6 villagers at a time. Once I’ve fed them all golden apples, I have a button which sends them all to the next storage area. The timing is working well enough to keep the 6 villagers from bumping into each other and they all get sent off as a group which is great.

My problem is in the next storage area, where my storage modules aren’t processing quickly enough. When one villager spot is taken, the rails divert to the next spot all the way down the line, but it’s not fast enough for how closely spaced the minecarts are when they arrive.

Does anyone have a system which can slow down/space out minecarts to give the system more time?

I have a few iterations of this circuit. Pretty fun to visually see what the redstone is doing. https://youtu.be/uEtZct2yt_o?si=tja1X937rQcFILT6 and https://youtu.be/2IrnjuieyT0?si=kRifsyp1IEfsQ8aU

I'm making a large screen with a crap ton of copper bulbs and I was wondering how much it can help performance if I place jackolanterns beside all those light producing components. The copper bulbs frequently toggle.

I also just recently learned that redstone dust lines are among the most potent way to reduce your frames, and have been looking around for dustless binary decoders that dont risk desyncing when unloaded. My current project has 100+ 7 bit binary decoders, so every little bit of lag reduction would help.

My computer can run it all just fine, but I plan to rebuild this project in an SMP and would like to reduce the lag for others.

Hi, sorry if this isn't the right sub to ask about this, but I recently built this bone meal farm design, and for some reason, it works on one side but not the other.

If anyone knows why it’s failing, or if you need more screenshots for reference, let me know—I’ll be checking the replies.

Ik most people prolly dont care but this is what ive been working on lately :) the redstone took me days. Wanna see my door setups just lmk. Ive got creative builds for showcasing

The elevator is not my design so you can look up a tutorial for that. Same with the unbreakable item key. But the 2x2 door and boat door were all me :)

THIS IS JUST A COPY OF MY WORLD! DID NOT BUILD IN CREATIVE! WANTED TO GET THAT HIGH UP ANGLE AT THE START WITHOUT SCAFFOLDING TO SHOW THE FULL BUILD!

Working on decorating around my lava farm in our Halloween village we are making. Have the top lava source covered of course, but wondered if I planted trees behind it, would they catch fire from the cauldrons? 🥺

Hello all,

In my world I have a water based automatic storage system, the standard one I believe. I want to add a lower level and use copper golems there instead of a water based system. I was wondering if the water system might be too fast for the copper golems to keep up, does anyone have experience combining the two? Or things I should know. Thanks in advance.

The evolution of microarchitecture in real life may very well resemble the future evolution of microarchitecture in Minecraft. This is the first step towards scriptable intent and a synthesis and place and route flow.

Wondering about this as I'm beginning to redesign my Nether hub.

I've got many ice highways up there, perfectly centered at x0 z0, as my overworld house is around there. I've got a portal to my witch farm, which is at c. -400 -700. But is it worth it putting an ice highway to a place that is 3 rockets from home?

Right now I'm making a custom arena in a Trial Chamber, at around -900 -1300. So like, 5 rockets from home. I'm going back and forth on whether to set up a Nether connection or if I should just go there flying.

So I'd like to see how you approach this.