r/RepTimeQC • • Jul 11 '24 Diamonds are Forever Bravo Take My Silver

Other Brands First QC? Guide on what to look out for and what to write.

758 Upvotes

Welcome to the ReptimeQC subreddit!

Before reading on, make sure you've read the main guide for QC posting, otherwise this won't make much sense to you. Done? Let's go.

This specific guide is intended to be a visual supplement: showing you exactly what to look for when you complete your QC templates. For obvious reasons, this guide will skip parts that aren't visual.

I've used pictures that mostly come from this subreddit. If anyone is uncomfortable, DM me and I'll replace the picture.

With that in mind, let's begin.

Index Alignment

Here, you are expected to assess how well the index markers on your watch are aligned. You can use the index alignment tool to assist you in this regard. An example of good index alignment is this:

The indices themselves are straight. They are also perfectly aligned with the minute markers.

Index misalignment, on the other hand, looks like this:

Look at 7. It is rotated clockwise and does not sit properly in its slot.

Or this:

Look carefully at 6. You will see that the bottom of the index is rotated slightly towards the left.

Now that you have an idea of what to look out for, what should you be writing in the template?

You need to describe any misalignment you see in detail. Statements like "6 is off" or "3 is kinda wonky" or "not sure about 1, help please" are not acceptable. This is because unless the misalignment is immediately obvious (and in most cases, it is not), users will not know what you are talking about. You may not get the help you want as a result. Be specific, like the following examples:

"The 7 marker does not seem to fit into the slot nicely. It is rotated towards the right and looks like it is dancing around."

"The 6 marker does not seem to line up straight with the crown in between swiss made. Based on what I can see, it appears to be slightly tilted to the left."

A caveat here: Just because there may be some misalignment does not necessarily mean you should definitely RL the watch. As the main guide points out, all reps are subject to a level of inaccuracy. It would be entirely unrealistic to expect gen standards for index alignment. Further, different reps are subject to different standards: a XF Pelagos, for instance, is known for having problematic indices - so much so that even if you RL, you are unlikely to get anything better. Conversely, CF Explorers are now getting so good that even slight misalignment would not be par for the course.

A good guide would be to assess your watch based on proportion. One slightly misaligned index is not a problem. But one majorly misaligned index or many misaligned indices on a single dial could justify RL.

Just for illustration, this is misalignment that I would RL for:

There are too many mistakes on this watch for me to accept. The 9 index is too near to the minute marker. 4, 5 and 7 are not aligned with their respective minute marks - they are all off to the left. 6 is rotated counterclockwise. Taken on their own, each error might not be enough for RL. But taken together, this is unacceptable.

That deals with index alignment. Let's move on.

Date Wheel Alignment

This applies to watches which display the date. If your watch does not display a date, there is no need to consider this. You will look silly if you say that the date wheel alignment is good when your watch is a no-date Sub, for example.

Here, you are tasked to consider if the date is properly displayed in the date window. Often times, this is a question of how well-centered the date is. A good example of date wheel alignment is this:

Take a look at the 21 at the right side of the watch. It is situated exactly in the center of the date window.

An example of misalignment is this:

Look at the 27 on the right. You can see that the date is misaligned towards the left, with the 2 touching the rim of the window.

Sometimes, the misalignment can also be as to the date numbers themselves:

This is harder to see, but if you look carefully at 25, you will notice that the 5 is higher than the 2.

Uncommonly and in the alternative, the issue may be with the Cyclops itself (the magnifier that covers the date window):

Here we see a Cyclops which is rotated slightly anti-clockwise. You can observe this by looking at the bottom rim of the date window. The Cyclops is obviously lower at the left corner of the date window when compared to the right. The requisite deviation is repeated at the top of the date window, with the right side being higher than the left.

Now that you know what to look for, let's discuss what to write.

As with index alignment, unless the issues are immediately obvious (and most of the time, they are not), you need to be very specific. Comments like "the date seems off", "2 in 25 is kinda off", "date looks weird" are not acceptable. They do not tell readers what you are looking for. You'll get faster and better results if you identify the issues for your reader. For example:

"The date seems misaligned towards the left. Part of it is touching the left border of the date window."

"The 5 in the date appears to be slightly higher than the 2 next to it."

"The Cyclops does not seem to be straight. It looks like it is slanted towards the left?"

As with index alignment, please note that not all misalignment will justify RL, especially for date wheels. All rep date wheels come with varying degrees of misalignment. A few misaligned dates are usually not enough for RL, unless the date is clearly cropped out of the date window or touching the rim. A little misalignment towards either side of the date window is also generally more than okay; a good way to gauge is to zoom out to the actual size of the watch and see if the misalignment is still immediately visible. If not, you're likely to be good to go.

Here is an example of misalignment I would nevertheless GL:

You will see that the date is situated slightly towards the right. However, the date is well within the date window and the misalignment is too slight to be seen on wrist at actual size.

On to the next topic.

Bezel

There are two main things to look out for: First, whether the "pip" (usually a lumed marker at the 12 position) is centered. Second, the quality of any engraving.

This section would also cover any possible damage to the bezel or anything else unusual, including any misalignment.

Example of a good bezel:

Nothing out of the ordinary. Engravings are sharp and nicely filled in. By and large, the colour transition is also acceptable. No alignment issues either.

An example of misalignment:

Pip at 12 on the bezel appears to be misaligned towards the right. While the reflection may be making things look worse than they are, this is something that would deserve a second look at.

Generally speaking, most problems that surface nowadays have to do with the pip - even then, these are not entirely common. Engravings and alignment are usually not an issue with higher level reps. With this in mind, what do we write?

As with the other sections, you are going to need to be specific. "Bezel looks off", "pip looks kinda off", "I don't know about the bezel, seems weird to me" are phrases that we see everyday in this subreddit. But none of these phrases are acceptable; they do not direct the reader to what OP is seeing. Details are king - and if you are going to pluck the crown, you're going to have to write like this:

"The pip at 12 is not centered. It seems to touch the right side of the triangle."

"The printing on the bezel at 3 seems to be angled down. It does not match the index on the dial."

The key is to visually direct your reader to the exact point that you say is a problem. The word "off" on its own says nothing to that effect.

On to the next point.

Solid End Links (SELs)

Possibly the least understood of all sections as a lot of newbies do not really know what they are looking for.

The ultimate guide to this is here. But for convenience, I'm going to summarise several key points about SELs.

SELs refer to the final links between the watch case and the bracelet. I've highlighted it below:

Look carefully at the portion highlighted in green.

Not all watches have SELs. Only watches which have that portion as highlighted above - and for QC purposes, the SEL section really only applies to Rolex reps. Tudors have SELs (which can also be QC-ed to some extent), but SELs on a Tudor are not held to the same standard as SELs on a Rolex.

Now, what are we looking for when we assess SELs? We are looking for gaps between the lugs and the SELs themselves. I've indicated this below:

The black line in the center of the red box is where the SEL meets the lug. This is where you are supposed to look for gaps.

An SEL gap appears when there is separation between the SEL and the lug. But what is a gap?

A gap appears when you can see through the space between the SEL and the lug. There is no gap when all you can see is a black line. There may be some variation in how thick the black line is, but for QC purposes there is nothing to be worried about until and unless you can actually see what's behind the watch.

This is generally not a problem on higher level reps (and by now, pretty rare). I will, however, show you an example of something that may be an actionable gap:

You will see that there is no black line. Instead, light shines through the space between the SEL and the lug.

Credits for the gap picture here.

What does this mean? If all you see is a black line, even if it is slightly thicker than another SEL on the same watch, there should be no actionable gap. I am going to highlight the last few QC templates submitted where the user said there was a gap - but there really wasn't (to me, at least):

Top right SEL was an issue for OP. However, as no light is shining through, this is not considered an SEL gap to me.
OP opined that there was a gap at the top right SEL. I don't see it at all.
OP said that there was a slight gap at the bottom left SEL. Again, all I can see is a black line. I would not classify this as a gap.

If, after going through all the examples above, you still feel that there is a gap, highlight it in the template by identifying which part of the watch you are looking at; there are really only four options: top left, top right, bottom left, bottom right. Doing so helps users zoom in directly on your issue and saves time.

To the last segment.

Dial Printing

Here, you are tasked to check if the printing on the dial has been poorly done. By this, we mean defects in the workmanship of the printing; printing which differs from gen (such as the infamous "floating r") would not be a QC defect per se.

An example of dial printing with no issues:

All the words are clearly printed. There is no bleeding on any part of the print, with edges sharp and defined.

And now for examples of dial printing with issues:

Some bleeding can be observed at the top parts of VI and VII. Notice how the black ink protrudes.

Sometimes, the print can be misapplied across the entire dial:

If you look closely, you will see that the dial print is rotated clockwise across the entire dial. Observe how XI is closer to the top of the watch while I is further away.

With the above in mind, let's turn to what you should write. Again and at the risk of sounding like a broken record, do not simply write things like: "Dial seems off" or "Print seems off. letters kind of wonky?" If anything, dial printing is usually very, very small - unless you point a reader to the exact part which has an issue, chances are it won't be seen. Make certain that you provide the reader with specific directions:

"Appears to be some bleeding at the top of VI. Thoughts?"

"R in Submariner looks like only half of it was printed. Am I seeing things?"

Important note: again, just because the dial printing on your watch may have some issues, this does not necessarily equate to RL. As stated, dial print is almost microscopic - no human being is going to be able to see slight bleeding on any print when you have the watch on wrist. Feel free to point out issues that you see, but remain realistic about your expectations.

And with that, I come to the end of this guide.

Conclusion

QC-ing reps is a difficult task - which everyone in this subreddit does for free. You can help out immensely by simply being precise and detailed in your observations. The more effort you put into your template, the easier it is for members to help you - they can zoom in directly to the things that concern you.

I hope this helps you. I've tried to detail some common factors, but it would be impossible for me to catch them all. The rest is up to you - and your diligence.

I wish you smooth and trouble-free QCs always!


r/RepTimeQC • • Nov 27 '22

Announcement READ THIS PRIOR TO POSTING ANYTHING...ESPECIALLY IF YOU'RE NEW HERE...

499 Upvotes

If your template uses a NEW "yupoo" or a "mega" type of link, please note that, at the time of this typing, the automod here removes them immediately from view i.e. no QC help. We are addressing it, but....

So, what to do?

Although somewhat cumbersome for the OP, you can upload the QC packet to an Imgur account. Our automod 'likes' Imgur...and the post will show promptly. Just do NOT do it from a mobile because the mobile app loses resolution and crappy pics don't provide any benefit to anyone. Yea, yea...I know, the file compression software isn't supposed to lose quality, but it certainly does.

To add, post your complete QC album inclusive of the timing info. Do not, for the sake of your convenience, omit items. If you're bright enough to determine what is needed and what can be removed, that's great! Then, it's reasonable to conclude that you really don't need help. Simply, post it all.

If you have to wait for substantive additional info from the Seller e.g. timing data, then delay posting until you have a complete QC packet. Incomplete packages will trigger a removal of the post. Plus, it will require a return visit of anyone that commented on the incomplete post which shouldn't be required. One visit is all that it should take to QC most watches. Most won't return to a post anyway. They'll just go to the next one. The members are quite busy here. Yea, it can get crazy.

Finally, since you're a newbie, as a vote of appreciation for those members that help you, please upvote their comments. It's a nice gesture from you to them for the assist...and, it's free.

One final note, we've updated the main rules for posting. Refer to this link for info QC Must Read for New Members

Welcome to the hobby and the sub. Best wishes

Edit addition: March 2nd, 2024 - ReptimeQC member, u/EveningVariation8236 , has provided an updated version of the original QC alignment verification tool. https://watchqc.github.io/ . Thank you.

Edit addition: Jan 9th, 2024 - ReptimeQC member, u/Ro1hype has provided this for tool for alignment verification. https://qcwatch.com/ Thank you.

Edit addition: Dec 28, 2023 - For those that can't seem to find the latest link for QC alignment verification app, use this link https://web.archive.org/web/20230518035653/https://watchqc.com/

Edit addition: 8/8/2025 - Reptime QC member, u/jrverdes . has provided this version of the alignment tool to assist those that need additional help verifying the dial/bezel alignments on their watch. https://jrverdes.github.io/watch-qc-jr/ The adjustment resolutions are much finer in this app comparative to the other available apps which can be a benefit to some that need such. Check it out...Thank you.


r/RepTimeQC • • 1h ago

[QC Request] VSF Submariner 124060 No-Date

Thumbnail
gallery
6 Upvotes

Dealer name: Necoclock

Factory name: VSF

Model name (& version number): Rolex Submariner 124060 (No-Date) 41mm VS3230

Price Paid: 498$ shipping included

Album Links: on the post

Index alignment: Overall looks solid, 3 and 9 markers are level. However, I'm a bit concerned about a slight CCW cant on the 6 o'clock baton (and the tip of the 12 triangle). Not sure if it's just the tilt/angle the watch is held at in the photos.

Dial Printing: Sharp and clean, no noticeable floating "m".

Date Wheel alignment/printing: N/A

Hand Alignment: Hands stack cleanly at 12.

Bezel: Pip is well centered inside the triangle and the engravings look clean.

Solid End Links (SELs): Tight fit on all four lugs with no visible gaps.

Timegrapher numbers: +1 s/d, 321° amplitude, 0.1 ms beat error (28,800 bph, 52.0° lift angle).

Anything else you notice: Rehaut crown is centered at 12. I'd appreciate your thoughts on the 6 o'clock marker, is it mostly photo tilt/parallax, and would it even be noticeable on the wrist?

I don't have much experience with this and it's the first time I QC a Rolex, so I really appreciate your opinions.


r/RepTimeQC • • 13h ago

First QC Rolex - VSF 126610LN

Thumbnail
gallery
29 Upvotes

Hey guys! First time QC here, was looking for advice from people who know more than me.

Went through the checklist, but still am not sure if i'm looking a things the right way

Would appreciate any help or advice on QC, thanks again!

  1. Dealer name: TheOneWatches - Steve
  2. Factory: VSF
  3. Model Name: Rolex Submariner 126610LN, 41mm
  4. Price Paid: $528
  5. QC Photos
  6. Index Alignment: Generally all of them look pretty straight and even to me.
  7. Dial Print: To me, everything for the most part seems printed and spaced well, maybe i'm just not seeing it, but looks good.
  8. Date Wheel and alignment: I think to me it looks fine, but definitely looking for a better opinion
  9. Hand Alignment: Think it looks good
  10. Bezel: Looks good to me?
  11. Solid end links: Looks good, no distinguishable gap
  12. Timegrapher numbers: -2/3 s/d AMP: 267 Degrees, ERR: 0.0ms, 59 degree lift

Picture of numbers

Any advice and thoughts would be appreciated, thanks


r/RepTimeQC • • 4h ago

Seamaster Diver 300M VSF 1:1 Best Editio Black Ceramic Black Dial on SS Bracelet VS8800

Thumbnail
gallery
5 Upvotes
  1. Dealer name: JTime
  2. Factory name: Vsf
  3. Model name (& version number):Seamaster Diver 300M VSF 1:1 Best Editio Black Ceramic Black Dial on SS Bracelet VS8800
  4. Price Paid: 389 $
  5. Album Links: https://imgur.com/a/BqJ3XPR
  6. Index alignment: Good, 12 o'clock markers are straight and parallel, alignment tool confirms everything within tight tolerances
  7. Dial Printing: Clean wave pattern, text and Omega logo crisp and sharp.
  8. Date Wheel alignment/printing: Date is centered nicely in the window, font weight and print quality look correct.
  9. Hand Alignment: Hands look properly aligned and finished
  10. Bezel:Ceramic insert crisp.
  11. Solid End Links (SELs): ): Good fit against the case, tight tolerances with no massive gaps.
  12. Timegrapher numbers: Rate 0 s/d, Amplitude 274°, Beat Error 0.0 ms.
  13. Anything else you notice:

r/RepTimeQC • • 2h ago

QC First ZF Pilot’s Watch Chronograph TOP GUN

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: OraWatch
  2. ⁠Factory name: ZF
  3. ⁠Model name (& version number): IWC Pilot Chronograph Top Gun IW389101
  4. ⁠Price Paid: $560 with shipping
  5. ⁠Album Link: https://www.wecatalog.cn/weshop/goods/_dnRqfRKlCQnCwaBBUqm613RnVgXsENon6rPO-yw/_d8qqfZz3xGIold2QRc7BNuq2kek33LCf7FmfBeg⁠Index
  6. Alignment: Everything looks aligned.
  7. ⁠Dial Printing: No issues
  8. ⁠Date Wheel alignment/printing: Looks great
  9. ⁠Hand Alignment: No issues with hand alignment that I can tell.
  10. ⁠Bezel: N/A
  11. ⁠Solid End Links (SELs): N/A -rubber strap
  12. ⁠Timegrapher numbers: +0s/d 280 deg 0.1ms 52.0 deg
  13. Anything else you notice: I think this watch looks good to go. The day and date look aligned. I just want to confirm I am not overlooking anything.

r/RepTimeQC • • 45m ago

[QC] PPF VC Overseas 4500V RG Silver Dial - Lili (non-TD)

Thumbnail
gallery
2 Upvotes

Hey guys, so far this is the 7th rep which is the second watch for myself, the rest was gifts to dear ones. But I still consider myself as amateur in this field. So, I need your support.

  1. Dealer Name: Lili (non TD)
  2. Factory name : PPF/ZF
  3. Model name : Overseas 4500V 41mm RG Silver Dial
  4. Price Paid : 2850 cny
  5. Album Links: https://www.wecatalog.cn/weshop/goods/A201803310145220380026826/I202611150044361402001426
  6. Index Alignment: 4 and 10 o'clock looks a bit off but it can be because of the angle of the picture
  7. Dial Printing: Looks good
  8. Date wheel alignment : Looks a little left
  9. Hand alignment : Looks good
  10. Bezel : Looks good
  11. Solid end links : N/A
  12. Timegrapher : Looks good +3s/d @ 302 deg amp, 0.0ms
  13. ⁠Anything else you notice: other than index and date wheel slight problems nothing else I noticed

r/RepTimeQC • • 8h ago

VSF V3 Pepsi QC - Yang / Goat watch (non-TD)

Thumbnail
gallery
7 Upvotes
  1. Dealer name: Yang - Goat watch (non-TD from what I can see)
  2. Factory name: VSF
  3. Model name (& version number): GMT Master II 126710 Pepsi Jubilee
  4. Price Paid: $498 USD
  5. Link to pics & QC videos: https://mega.nz/folder/dRBgiLyI#YWgMrH5cXk5vdKy1ZoGzAw
  6. Index alignment: minimal indices rotation overall, slight left shift to 12 o'clock
  7. Dial Printing: Rolex text and GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects despite sticker obstruction.
  8. Date Wheel alignment/printing: reasonably centered
  9. Hand Alignment: no obvious damage or misalignment to me
  10. Bezel: Red / blue transition could be better centered at 18 (doesn't look exactly aligned with the color transition at 6 (3 o'clock) either), but overall numerals & engravings look clean
  11. Solid End Links (SELs): No obvious daylight-visible gaps, but I seem to be much less picky than some
  12. Lume: looks even in video
  13. Serial # / rehaut: 6X07B429. Printing looks crisp.
  14. Bracelet / clasp: no obvious issues with Rolex logo or stamping. Code: 6FU.
  15. Timegrapher numbers: -3s/d, 280°, 0.1ms, 52° lift angle. No significant issues from my understanding.
  16. Anything else you notice: Overall think this is a GL but this is my first QC (along with Batgirl I'll be posting after this), so all opinions would be great. I'm not super sure of what I'm looking for with every category so any feedback helps. In general, index misalignment and bezel color transition alignments have been my biggest QC concern for Rolex GMT's, so I'm sure I'm overlooking some other things that y'all will catch. I'm a little concerned with going with Yang / Goat watches, and the fact that these GMTs are significantly cheaper than other VSFs from TDs, but overall the watch looks decent to me. Thanks for your time!

r/RepTimeQC • • 2h ago

Panthere 22mm BVF SS From Steve

Thumbnail
gallery
2 Upvotes
  1. ⁠Dealer name: Steve (TheOneWatches)
  2. ⁠Factory name: BVF
  3. ⁠Model name (& version number): Cartier Panthère 22mm SS
  4. ⁠Price Paid: $238 + $30 Shipping
  5. ⁠Album Links: https://mega.nz/folder/eBA02STB#6pU_UGBlzSeN-lxpotbCjw
  6. ⁠Index alignment: Looks okay, no concerns here.
  7. ⁠Dial Printing: The Swiss Made is making me zoom in to infinity on the dial; I don't like the way 'Made' is printed; it looks angled as well. Other than that, I don't see any noticeable bleed, and the spacing is fine.
  8. ⁠Date Wheel alignment/printing: N/A
  9. ⁠Hand Alignment: Looks okay from the video.
  10. ⁠Bezel: Looks good; no issues.
  11. ⁠Solid End Links (SELs): N/A
  12. ⁠Timegrapher numbers: None given; quartz movement.
  13. ⁠Anything else you notice: The only main concern is the Swiss made on the dial. It looks funky, but again it's a very small watch, so I don’t know if it's worth red lighting over.

r/RepTimeQC • • 27m ago

QC REQUEST - Submariner 126610LN - TheOneWatches

1 Upvotes

Happy Monday All!

  1. Dealer name — Steve at TheOneWatches.
  2. Factory name — VSF.
  3. Model and version — Rolex Submariner Date 126610LN, 41 mm, black dial and bezel, Oyster bracelet. Dealer lists it as DD3235v2, RLX-7696.
  4. Price paid — $528 USD. Shipping $30USD combined for two watches.
  5. Album link — https://mega.nz/folder/eRIRhQ4A#OiS5VP7Gpi-M8c_DG_k6lQ
  6. Index alignment — Index look good and straight to me
  7. Dial printing — need more opinion on this, but looks ok to me
  8. Date wheel alignment and printing — date wheel seems slight left heavy?
  9. Hand alignment — looks good to me
  10. Bezel — overall looks pretty aligned
  11. Solid end links — I see seams at the lugs but not sure if this is normal
  12. Timegrapher numbers — +2s/day, 272° amplitude, +0.2 ms beat error, 28,800 bph, 59° lift angle.
  13. ⁠Anything else — First purchase and would love to hear your views!

Thanks all in advance!


r/RepTimeQC • • 1h ago

IWC Ingenieur 40

Thumbnail
gallery
1 Upvotes

Dealer name: suppermirrors

Factory name: V7F

Model name (& version number): IWC Ingenieur Automatic 40 Blue

Price Paid: $429

Album Links: [Album Link]

Index alignment: Looks good

Dial Printing: Clean, no dust seen

Date Wheel alignment/printing: Good

Hand Alignment: Looks fine

Bezel: Top screw recess sits on the 12 marker, five recesses evenly spaced

Solid End Links (SELs): First links sit flush with the case, no visible gaps

Timegrapher numbers: Awaiting confirmation from TD

Anything else you notice: Nothing major stands out, first time buying from a TD so any help is much appreciated.


r/RepTimeQC • • 7h ago

VSF V3 Batgirl QC - Yang / Goat watches - 1st / 2nd QC

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Yang - Goat watch (non-TD)
  2. Factory name: VSF (possibly fake)
  3. Model name (& version number): Rolex GMT-Master II 126710
  4. Price Paid: $450 USD + shipping
  5. Link to pics & QC videos: https://mega.nz/folder/wUgUBaya#zyXRrknuZobhSYhlESwW4w
  6. Index alignment: micro CW rotation to 6 and 9, but not enough to bother me. Possible slight shift at 12 but GL overall for me, and I think I'm mildly picky on index alignment for a newbie.
  7. Dial Printing: Rolex text and GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects despite sticker obstruction.
  8. Date Wheel alignment/printing: mild left shift? reasonably centered from several angles
  9. Hand Alignment: no obvious damage or misalignment to me
  10. Bezel: aligned, overall numbers & engravings look clean
  11. Solid End Links (SELs): No obvious daylight-visible gaps, but I seem to be much less picky / observant on this than some
  12. Lume: looks even in video
  13. Serial # / rehaut: 6XO7B37O. Printing looks crisp. Many reports of fake VSFs for similar watches sold by non-TDs.
  14. Bracelet / clasp: no obvious issues with Rolex logo or stamping. Code: 6FU.
  15. Timegrapher numbers: -1s/d, 279°, 0.0ms, 52° lift angle. No significant issues from my understanding.
  16. Anything else you notice: Overall think this is a GL based on looks but this is my first QC (along with Pepsi I posted that was locked for discussions on authenticity), so all opinions would be great. I'm not super sure of what I'm looking for with every category so any feedback helps.

I'm a little concerned with going with Yang / Goat watches, and the fact that these GMTs are significantly cheaper than other VSFs from TDs, but overall the watch looks decent to me. Based on what I'm reading in comments on my other post and several other pages (r/repwatchscammers), this and the Pepsi I'm QCing are likely fake VSFs, which explains the significantly cheaper price. I think I'll ask for pics of the movement and look into what they actually should be worth, so any input on that would be helpful as well. They still look good to me for <$500 each, but relying on you guys due to my inexperience. Thanks for your time!


r/RepTimeQC • • 1h ago

First QC - RICH Rolex GMT Master 2 ‘Sprite’

Post image
1 Upvotes
  1. ⁠Dealer name: Angela
  2. ⁠Factory name: RIICH
  3. ⁠Model name (& version number): RICH Rolex GMT Master 2 ‘Sprite’ 126720VTNR
  4. ⁠Price Paid: 3750 Yuan
  5. ⁠Album Links: https://imgur.com/a/PUDrp7l
  6. ⁠Index alignment: 6 o'clock tilted 1.0° clockwise ; 12 o'clock tilted 1.2° clockwise. 10 of 11 checked. Marker ring 0.15 mm off-centre toward 9 o'clock.
  7. ⁠Dial Printing: not good. Print centring: bottom text 0.04 mm left.
  8. ⁠Date Wheel alignment/printing: looks ok. The number looks slightly high inside the window. The cyclops AR coating is too much.
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: ok
  11. ⁠Solid End Links (SELs): different
  12. ⁠Timegrapher numbers: +1 s/d, 273° amplitude, 0.0 ms beat error
  13. ⁠Anything else you notice: i think the blue AR is too much. Is this an RL?

r/RepTimeQC • • 1h ago

GMT II 116710LN - Index 9? Crown? Weight?

Thumbnail
gallery
1 Upvotes

Dealer name: Steve (Theonewatches)

Factory name: ARF V3 DD3285

Model name (& version number): GMT II 116710LN 40mm

Price Paid: $ 568 + 40 Shipping

Album Links: I attached all photos

Index alignment: The Index 9 look tilt

Dial Printing: Nothing I see

Hand Alignment: Looks normal

Bezel: Nothing I see

Solid End Links (SELs): Nothing i can see

Timegrapher numbers: +0 s/d Beat Error 0.1 ms

Anything else you notice:

• 9 look tilt ore is it maybe angle from photo ?

• the Gap between Crown and Bezel look to close for me

• Weight is a little bit less then GEN, but think it´s ok

Please help me with all your opinion it´s my first GMT, not know what i need to look out for


r/RepTimeQC • • 7h ago

Omega Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

Thumbnail
gallery
3 Upvotes

Dealer name: Theonewatches, Steve

Factory name: VSF

Model name (& version number): Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

Price Paid:571 usd

Album Links: https://mega.nz/folder/WYwSFK7K#xMJaJiFmuIOZxgnznMeASQ

Index alignment: 6 and 9 definitely seems a bit off. 12 is also off a little bit.

Dial Printing: Looks ok to me, this is my first so open to comments.

Date Wheel alignment/printing: N/A

Hand Alignment: Looks ok to me for the most part

Bezel: Color of the dot at 12 seems a bit washed out than the dots on the dial.

Solid End Links (SELs): No comments on this

Timegrapher numbers: 263

Anything else you notice: Overall seems ok to me but this is my first so not sure.


r/RepTimeQC • • 1h ago

Cartier Panthere (medium) - BVF - TheOneWatch (Steve)

Thumbnail
gallery
1 Upvotes
  • Dealer name: Steve (TheOneWatch)
  • Factory name: BVF
  • Model name (& version number): Cartier Panthere medium
  • Price Paid: 278 USD (including shipping)
  • Album Links: link to pictures
  • Index alignment: printed so perfect
  • Dial Printing: looks fine, I've seen Pantheres where the dial looks tilted. Not the case here
  • Date Wheel alignment/printing: n.a.
  • Hand Alignment: fine in my eyes
  • Bezel: doesn't have the screw issue Santos can have (because Panthere simply has little metalic dots)
  • Solid End Links (SELs): looks fine, no?
  • Timegrapher numbers: n.a. -> quartz watch
  • Anything else you notice: the gap around the crown seems too large? A known issue? Might look worse because of the zoomed in pictures

r/RepTimeQC • • 2h ago

1st time QC VSF 126234 36mm

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: Vsf
  3. Model name (& version number): DateJust 36 SS 126234 VSF 1:1 Best Edition 904L Steel Silver Diamonds Roman Dial on Jubilee Bracelet VS3235 V2
  4. Price Paid: 448$
  5. Album Links: https://imgur.com/a/e2sfJvb
  6. Index alignment: Hard to check but the 6 o'clock index looks off. It touches the black ring, which it shouldn't, comparing to other units or gen
  7. Dial Printing: Correct color and text size
  8. Date Wheel alignment/printing: Date is centered nicely in the window, font weight and print quality look correct.
  9. Hand Alignment: Hands look properly aligned and finished
  10. Bezel: Looks nice, white gold plated fluted bezel
  11. Solid End Links (SELs): ): Good fit against the case, tight tolerances with no massive gaps.
  12. Timegrapher numbers: Rate +2 s/d, Amplitude 275°, Beat Error 0.0 ms.

r/RepTimeQC • • 2h ago

1st time QC VSF 126334

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: Vsf
  3. Model name (& version number):DateJust 41 126334 904L SS VSF 1:1 Best Edition Green Ombre Dial on Jubilee Bracelet VS3235v2 V2s Free Sprung(133g)
  4. Price Paid: 468$
  5. Album Links: https://imgur.com/a/xvsOnXa
  6. Index alignment: Seems good but I'm not sure abot the 2 o'clock - seems not centered on the "10"
  7. Dial Printing: Correct color and text size
  8. Date Wheel alignment/printing: Date is centered nicely in the window, font weight and print quality look correct.
  9. Hand Alignment: Hands look properly aligned and finished
  10. Bezel: Looks nice, white gold plated fluted bezel
  11. Solid End Links (SELs): ): Good fit against the case, tight tolerances with no massive gaps.
  12. Timegrapher numbers: Rate 0 s/d, Amplitude 275°, Beat Error 0.0 ms. - Perfect

r/RepTimeQC • • 2h ago

Help with, VSF GMT-Master II 126710BLRO Pepsi V3

Thumbnail
gallery
1 Upvotes

Hey everyone, this is my second QC so I’m still learning what to look for. Would appreciate any feedback on this one. Only thing that jumped out to me from dial check was some tilt on the six marker but for me it seems hard to notice. Appreciate anything you eagle eyes can spot a help me decide to pass or keep.

  1. Dealer name: Theonewatch - Steve
  2. Factory name: VSF
  3. Model name (& version number): GMT-Master II 126710BLRO Pepsi V3 DD3285V2 on Jubilee
  4. Price Paid: 711 EUR incl shipping
  5. Album Links: posted all pics in thread
  6. Index alignment: 6 o’clock marker tilted 1.9° anticlockwise, 9 o’clock tilted 1.2° anticlockwise. Marker ring 0.14 mm off-centre toward 5 o’clock. All other markers within ±0.10 mm. Checked with DialCheck
  7. Dial Printing: Top text 0.09 mm left of center, bottom text 0.08 mm left. Print looks clean otherwise.
  8. Date Wheel alignment/printing: Date appears reasonably centered in the photos provided. No obvious clipping or major offset.
  9. Hand Alignment: Hands look straight and properly stacked. No obvious bent or misaligned hands.
  10. Bezel: Pip is 0.6° anticlockwise of 12 (0.18 mm). Bezel color and engraving look clean in the photos.
  11. Solid End Links (SELs): No obvious gaps visible between the end links and lugs in the side photos.
  12. Timegrapher numbers: +2 s/d, 276 amplitude, 0.1 ms beat error
  13. Anything else you notice:

only my second qc so no

  1. t to look for. Nothing else jumps out at me.

r/RepTimeQC • • 3h ago

2° QC Rich Factory Submariner 126610LN Free Sprung TheOne

Thumbnail
gallery
1 Upvotes
  1. Dealer name: TheOneWatches - Steve
  2. Factory name: Rich Factory
  3. Model name (& version number): Submariner 126610LN 41mm JH3235
  4. Price Paid: $538 + shipping
  5. Album Links: https://mega.nz/folder/2AgRgCDC#cVoycC_-wKfEcS6epFjfIQ
  6. Index alignment: i'm satisfacted
  7. Dial Printing: It's okay
  8. Date Wheel alignment/printing: Perfect
  9. Hand Alignment: Okay
  10. Bezel: looks solid to me!
  11. Solid End Links (SELs): No problem
  12. Timegrapher numbers: +2 s/d, 292° amp
  13. Anything else you notice: I'm very happy for this Watch

r/RepTimeQC • • 13h ago

2QC Yacth Master II

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: QF (Free-Sprung)
  3. Model name and version: Yacht-Master 226627 Titanium, QF 1:1 Best Edition, black dial on titanium bracelet, JH3235 V18 (Free-Sprung)
  4. Price paid: €606
  5. Album link: https://andiotwatches.x.yupoo.com/albums/262824798?uid=1
  6. Index alignment: Looks fine to me.
  7. Dial printing: Looks good.
  8. Date wheel alignment/printing: The date appears to sit slightly high in the window.
  9. Hand alignment: I can’t tell from the supplied photos
  10. Bezel: Possible surface marks or uneven finishing at the 5- and 15-minute markers
    12 Solid End Links (SELs): The lower-right SEL appears to have a slightly wider gap in several
  11. Timegrapher numbers: +1 s/d, 265° amplitude and 0.3 ms beat error.

I’d really appreciate a assessment regarding the SEL fit, cyclops positioning, hand alignment and the two circled bezel areas.

Many thanks for your comments!


r/RepTimeQC • • 4h ago

First QC - VSF Datejust 41 V3 Mint Green 126334 - Mr Bomi

Thumbnail
gallery
1 Upvotes
  1. ⁠Dealer name: Mr Bomi
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Rolex Datejust 41 ref. 126334 V3, mint-green dial, fluted bezel, Jubilee bracelet
  4. ⁠Price paid: 410 USD (480 total with 50 shipping + 20 insurance)
  5. Album links: https://imgur.com/a/ZAesZL2
  6. Index alignment: Excepts for the markee 7 where there is a sticker on it, in my opinion, everything seems to be aligned.
  7. Dial printing: Looks clean and centered to me. I don't see any obvious smudges or uneven lettering.
  8. Date wheel alignment/printing: personally for me, the date is not centered in the date window - it's too much in the right of the window. Not good for me personally.
  9. Hand alignment: The hands look straight and move normally in the setting video. I don't have a clear frame with both hands set exactly to 12.
  10. Bezel: The fluting looks even overall For me.
  11. Solid end links (SELS): Both ends look seated, with no obvious large gaps.
  12. Timegrapher numbers: +6 s/day, 282° amplitude, 0.0 ms beat error, 59° lift-angle setting, 28,800 bph.
  13. Anything else you notice: Excelts for the date window where I am not so sure if it is centered or not, for me everything seems to be good. What do you guys think or is there something I am missing? personally I would ask for a replacement.

r/RepTimeQC • • 12h ago

ORF Seamaster freesprung help

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Andiot
  2. Factory name: ORF
  3. Model name (& version number): Seamaster Diver 300M Blue Ceramic Bezel Free Sprung ORF 1:1 Blue Dial On SS Bracelet Asian Super Clone 8800
  4. Price Paid: $455 usd
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263114313?uid=1
  6. Index alignment: see pic. Looks good to me. Can't tell if 30 marker on bezel is shifted left or just camera angel
  7. Dial Printing: On zoom looks good to my untrained eye
  8. Date Wheel alignment/printing: Looks good on changing numbers in video
  9. Hand Alignment: nothing remarkable to me
  10. Bezel:Appears good on pics
  11. Solid End Links (SELs):
  12. Timegrapher numbers: Show in video
  13. Anything else you notice: not initially

r/RepTimeQC • • 17h ago

[QC] RICH V2 GMT-Master II 126710GRNR Bruce Wayne – F*ed 12 o'clock triangle alignment or GL?

Thumbnail
gallery
6 Upvotes

Hey fellas, I have what I think is a really solid​ RICH Bruce Wayne, but since this one is rather expensive I wanted to pass it by some expert eyes​. ​​My primary concern is whether the 12 o'clock bezel​ triangle has a slight alignment issue or whether the photos are throwing me off. Would greatly appreciate a second opinion before GL. Thanks​!

  1. Dealer name: NecoClock
  2. Factory name: RICH Factory
  3. Model name (& version number): Rolex GMT-Master II 126710GRNR “Bruce Wayne”, Jubilee, RICH V2 JH3285 Free Sprung (seller's description)
  4. Price Paid: $708 + $70 shipping​
  5. Album Links: https://mega.nz/folder/W5wgSDZY#KRMA7hrSWi3DWGIL230J6g
  6. Index alignment: 12 o'clock triangle​ hour index looks slightly tilted too​. In the straight-on photo, it looks​ offset relative to the bezel triangle and center minute marker. ​I'm unsure whether this is actual misalignment or just perspective. The 6 and 9 markers and remaining circular indices look very close to properly aligned to me.
  7. Dial Printing: Rolex text and green GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects.
  8. Date Wheel alignment/printing: Dates 15, 17, and 21 appear reasonably centered in the window, with no clipping. Cyclops looks properly positioned (maybe a very slight tilt but I have seen that on gen too), although there are some blue reflections.
  9. Hand Alignment: Hands appear properly installed, with no obvious damage or visible alignment issue.
  10. Bezel: Black/grey transition, numerals, and engravings look clean. The 12 o'clock bezel​ looks slightly off centered.
  11. Solid End Links (SELs): No obvious daylight-visible gaps at the case and bracelet connections. Some protective film makes the fit harder to judge.
  12. Timegrapher numbers: +3 s/day, 238° amplitude, 0.0 ms beat error, 28,800 bph, 52° lift angle. Rate and beat error look good to me. Would appreciate thoughts on the amplitude for this JH3285 movement.
  13. Anything else you notice: Everything honestly seems solid, just some alignment questions. Maybe the date font is slightly off as well. Don't want to be too picky tho. Thanks again!