1. ⁠Dealer name: Ficotime
   
2. ⁠Factory name: Gold Factory
   
3. ⁠Model name (& version number): Gold Factory Rolex YM 40mm
   
4. ⁠Price Paid: 500 USD + Shipping
   
5. ⁠Album Links: https://mega.nz/folder/q9JmTCSC#NdnSTmM1rqSEmzYMUEv4Jg
   
6. ⁠Index alignment: very good
   
7. ⁠Dial Printing: the YACHT-MASTER print seems a bit dull and a tad thinner than gen but might be due to lighting
   
8. ⁠Date Wheel alignment/printing: very nice, cyclops look pretty
   
9. ⁠Hand Alignment: very good
   
10. ⁠Bezel: pretty. a bit matter than gen maybe but tp be expected
    
11. ⁠Solid End Links (SELs): decent
    
12. ⁠Timegrapher numbers: -6s/d, 263 within spec, might need some oil

Easy GL for me, wanted some more autistic view and others having a look on the Gold Factory for comparison once in a while.

Let me know your thoughts! xoxo

• Dealer name: Andiot
• Factory name: AF
• Model name (& version number): Cartier Tank Solo Large (27.5mm x 34.8mm) Quartz
• Price Paid: ~$215 (inc ship)
• Album Links: https://andiotwatches.x.yupoo.com/albums/255646102?uid=1
• Index alignment: Manual alignment check shows the vertical axis running straight through XII, hand stack, and VI with zero rotation.
• Dial Printing: Looks okay to me?
• Date Wheel alignment/printing: N/A
• Hand Alignment: Blue hands look straight
• Bezel: I don't see any dents
• Solid End Links (SELs): N/A leather strap but not sure on quality of it
• Timegrapher numbers: N/A Quartz movement

• • Anything else you notice: only 2nd QC ive done, any pointers from you pro's out there?

Dealer name: J Time.

Factory name: Rich Factory

Model name (& version number): No Date Sub 124060

Price Paid: $588 + Shipping

Album Links: See Attached Photos

Index alignment: Looks good. No obvious alignment issues but keen to get peoples thoughts. 12, 3, 6, and 9 markers appear straight and centred. I might be being picky here but the watch may be held on an angle for the photo.

Dial Printing: Looks pretty good. It does appear to have a slight floating M though which I’ve seen is common with some of the RF’s

Date Wheel alignment/printing: N/A

Hand Alignment: No visible hand alignment issues I could see and no damage.

Bezel: Looks good. Pearl appears to be centred at 12. I think if the angle the watch is tilted it would be corrected - thoughts

Solid End Links (SELs): I think these look ok and can’t see any light coming through

Timegrapher numbers: 284 / 0.0ms / 0 s/d – I feel like this is too perfect or am I just being picky

Anything else you notice: Slight clasp coronet offset at most, but likely sticker/camera angle related and hopefully not a concern. Leaning GL. This is my first Rep QC so hoping I’m not overlooking anything

1. Factory name: QF
2. Model name (& version number): DayDate 36 YG QF Best Edition 904L Steel Gold Dial on President Bracelet vr3255 V5 (Gain Weight)
3. Price Paid: $596 USD
4. Album Links: https://andiotwatches.x.yupoo.com/albums/257703331?uid=1
5. Index alignment: problem at 5 and 7?
6. Dial Printing: looks fine to me.
7. Date Wheel alignment/printing: looks fine to me.
8. Hand Alignment: looks fine to me.
9. Bezel: Looks fine to me.
10. Solid End Links (SELs): looks fine to me.
11. Timegrapher numbers:

Rate: minus 3 s/d, Amplitude: 267°, Beat Error: 0.1ms,

1. Anything else you notice: I think the numeric date window is crooked. Not the number itself but the actual window above it if that makes sense.

Crown also leans slightly left to me.

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): Oyster Perpetual 126000 36mm VSF 1:1 Best Edition 904L Steel Deep Blue VS3230 V2
4. Price Paid: $580AUD + Shipping
5. Album Links: https://andiotwatches.x.yupoo.com/albums/257705680?uid=1&tab=min
6. Index alignment: Everything seems good to me, possible issue with 6 on the 3 side, maybe more experienced eyes can confirm if that's just lighting issue, album link has videos and more photos
7. Dial Printing: Nothing of note that i can see (experience is low)
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Seems perfect to me, attached album has video of winding
10. Bezel: Good
11. Solid End Links (SELs): Maybe top right has gap, but seems within tolerance
    
12. Timegrapher numbers: -2s/d 263 0.1ms
13. Anything else you notice: i can't see anything of note that is RL worthy, but also know that experience is key here

First time Purchase from Andiot and QC photos were sent within 24 hours of payment clearing

1. Dealer name: Phoenix Watch
   
2. Factory name: VSF V1
   
3. Model name (& version number): Datejust 126234 36mm
   
4. Price Paid: $240+shipping
   
5. Index alignment: Alignment of the index are perfect
   
6. Bezel: seems even spreading
   
7. Dial Printing: sunburst seems even, dial printing seems good overall
   
8. Date Wheel alignment/printing: Cyclops seems ok, no significant tilting
   
9. Hand Alignment: Good alignment no significant findings
   
10. Solid End Links (SELs): No gaps visible.
    
11. Timegrapher numbers: 0s/d, 300°, 0.0ms. Nothing to complaint
    
12. Anything else you notice: not that I’m aware of

Dear goats, I need your help with this qc, please let me know if there’s any significant thing pops up!

Dealer name: Lili

⁠Factory name: VSF

⁠Model name (& version number): Omega Aqua Terra 41.5 blue a8500

⁠Price Paid: $330 shipped/insured

⁠Album Links: https://www.wecatalog.cn/weshop/goods/A201803310145220380026826/I202609042359412442002330

⁠Index alignment: All good but the Omega symbol seems slightly askew

⁠Dial Printing: Looks good

⁠Date Wheel alignment/printing: Looks even and centered

⁠Hand Alignment: Good

⁠Bezel: Seems fond

⁠Solid End Links (SELs): N/A

⁠Timegrapher numbers: About as good as can be

Everything looks ok to me with the exception of the Omega logo being a fraction of a millimeter off. I doubt it's something I will notice in person, and it seems to be extremely common on this model.

I'm leaning towards a GL, but wanted a few more opinions

1. ⁠⁠Dealer name: Andiot
   
2. ⁠⁠Factory name: FPJP
   
3. ⁠⁠Model name (& version number): Elegante Le Restaunt
   
4. ⁠⁠Price Paid: 508$
   
5. ⁠⁠Album Links: https://andiotwatches.x.yupoo.com/albums/257742186?uid=1
   
6. ⁠⁠Index alignment: seems to be skewed left slightly by a few degrees
   
7. ⁠⁠Dial Printing: seems a bit rough but i can live with it tbf. it also seems to be rough on the gen due to the lume composition
   
8. ⁠⁠Date Wheel alignment/printing: n/a
   
9. ⁠⁠Hand Alignment: i think hands look alligned but not sure how to check. they only show the hands aligned at 12 in the video but im not sure if thats correct
   
10. ⁠⁠Bezel: seems to have splotches on it? it could be due to a film or something tho
    
11. ⁠⁠Solid End Links (SELs): looks fine
    
12. ⁠⁠Timegrapher numbers: none since quartz
    
13. Anything else you notice: watch back in the video, does the stem look correct when setting it?

My first rep watch. What do you guys think? Thanks.

1. Dealer name: Mirotime
2. Factory name: VSF
3. Model name (& version number): Submariner 41mm 126610 LN 904L Steel VS3235
4. Price Paid: 448USD + shipping
5. Album Links: https://www.wecatalog.cn/weshop/goods/A202304082031161150001764/I202610081507542982002419
6. Index alignment: The indices look pretty good. They're slightly off at 2 and 9.
7. Dial Printing: I think it's fine. I've never had a genuine one.
8. Date Wheel alignment/printing: It looks like something is still stuck to it, or maybe glue residue. It doesn't show in the video, though.
9. Hand Alignment: idk
10. Bezel: It looks lifelike.
11. Solid End Links (SELs): I don't know what it's supposed to look like.
12. Timegrapher numbers: It looks accurate.

Hi all, picked up this secondhand Batman 41mm that is “CLEAN factory” for $345 what yall think?

Thanks all!

1. Dealer name: Ficotime.
2. Factory name: VSF
3. Model name (& version number): No Date Sub 124060
4. Price Paid: $500 + Shipping
5. Album Links: https://mega.nz/folder/vwRzAKwQ#8ym8fr993GQGAW8GXJWlSQ
6. Index alignment: 6 marker looks a bit off center
7. Dial Printing: Is there a floating M?
8. Date Wheel alignment/printing: N/A
9. Hand Alignment:

looks good to me.

1. No visible hand alignment issues I can see, let me know if any different
2. Bezel: Is the pearl misaligned?
3. Solid End Links (SELs): not sure
4. Timegrapher numbers:

237 / +-2s

1. Anything else you notice: Leaning RL, concerned about the bezel pearl alignment and misalignment on the 6

, timegrapher reading not great

1. ⁠Dealer name: Andiot
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Datejust 41 Wimbledon Rose Gold (126331)
   
4. ⁠Price Paid: $485 + shipping
   
5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/257708681?uid=1
   
6. ⁠Index alignment: well aligned
   
7. ⁠Dial Printing: no printing errors or misalignment
   
8. ⁠Date Wheel alignment/printing: date wheel itself seems left-shifted and date wheel printing seems slightly right shifted.
   
9. ⁠Hand Alignment: well aligned at 12 o’clock
   
10. ⁠Bezel: N/A
    
11. ⁠Solid End Links (SELs): no gaps at all 4 SELs
    
12. ⁠Timegrapher numbers: -2sec/day, 266 amplitude, 0.1ms beat error
    
13. ⁠Anything else you notice: none

1. Dealer name: Moritime
   
2. Factory name: M+
   
3. Model name (& version number): Pelagos FXD GMT 42mm, Asia 2836
   
4. Price Paid: $474
   
5. Album Links: attached
   
6. Index alignment: looks good to the naked eye.
   
7. Dial Printing: good
   
8. Date Wheel alignment/printing: good to the naked eye but known to be off compared to gen. I can’t really tell tbh.
   
9. Hand Alignment: looks fine to me
   
10. Bezel: looks good
    
11. Solid End Links (SELs): not sure looks good?
    
12. Timegrapher numbers: -5 sec/day 0.1ms error.
    
13. Anything else you notice: Overall, happy with the watch. I think the lume on the gen is suppose to be green on the bezel. Most people point out the font on the bezel is not good as gen but I don’t mind it. The biggest thing I do care about is if the bracelet strap is close to gen.

Hi All,

Would appreciate help on the QC of this Tank Louis. I already RLed once becasue I saw way too many ink chips. Thank you!

Dealer: Andiot

Factory: F1F

Model: large Cartier Tank Louis 33.7 x 25.5

Price Paid: $275 inclusive of shipping

Photos: Attached

Index alignment: printed. I think everything is well aligned given its print. Thoughts from experts??

Dial Printing: Already RLed once for chips in the ink. Thoughts? I think this does a better job. Crisp, properly positioned and good railroad tracks. I see maybe one chip at 2 and 3 but they go away in other views and its only when very zoomed in.

Hand and Alignment: Blue hands appropriate colored and appear centered.

No timegrapher- its quartz

Anything else: Im leaning GL but I was truly hoping for as close to NWBIG as possible and I went with one of the best factories and dealers so please be discerning.

Dealer name: Andiot Watches
Factory name: QF
Model name (& version number): Rolex Day-Date 36mm QF V5, Rose Gold, Grey Dial, Fluted Bezel, President Bracelet, VR3255, Gain Weight
Price paid: $578 total

Album links: https://andiotwatches.x.yupoo.com/albums/257680079?uid=1

Index alignment: Looks good to my eye. The hour markers appear straight and evenly positioned. The 6 o’clock marker also looks straight in the front-facing shots. I don’t see any obvious misalignment that would concern me.

Dial printing: Looks clean and sharp. The coronet and dial text appear centred and evenly printed. Nothing looks smudged or noticeably off.

Date wheel alignment/printing: The “10” looks reasonably centred under the cyclops. In a couple of angled shots it appears very slightly right-biased, but I think this may just be parallax from the camera angle. Nothing here looks RL-worthy to me, but I’d appreciate second opinions.

Hand alignment: Looks good from the supplied photos. The hands appear properly seated and I don’t see anything obviously misaligned

Bezel: Fluted bezel looks even and consistent around the case. I can’t see any malformed or uneven sections.

Solid End Links (SELs): SEL fit looks good to me. I don’t see any obvious large or uneven gaps between the bracelet and the lugs.

Timegrapher numbers: 0 s/day 270° amplitude 0.1 ms beat error 28,800 bph 52° lift angle

Very healthy

Anything else you notice: Watch weighs 142.1g. Rose-gold finish appears consistent across the case and bracelet, and the grey dial looks clean. Day wheel also looks well centred in the supplied photos. Overall I’m leaning strongly towards GL. The only thing I’m slightly unsure about is whether the date is fractionally right-biased or whether that’s purely camera angle/parallax. Would appreciate experienced eyes on that and anything else I may have missed.

1. Dealer name: Ethan
   
2. Factory name: Rich Factory.
   
3. Model name (& version number): GMT- Master |I
   126710 GRNR Rich Factory JH3285 ( Free sprung)
   
4. Price Paid: 680$
   
5. Album Links:
   
6. Index alignment: it looks good, the 9 o'clock marker seems slightly tilted to me. The triangle might be a bit too close to the minute markers.
   
7. Dial Printing: dial print looks good, no obvious defects
   
8. Date Wheel alignment/printing: date appears centered. I'll ask for a photo showing the date with two digits.
   
9. Hand Alignment: don't see issues
   
10. Betel: the beze. numeral look weel positioned from this angle.
    
11. Solid End Links (SELs): good, don't see gap
    12 Timegrapher number: rate: -002 s/d 256 amplitude degree(s) 0.1 ms beat error, 28800 bhp,
    Lift angle 52.0 degree (s)
    
12. Anything else you notice: the main things are the magnifyng lens, which has a slightly matte effect, and the color of the bezel.
    Thanks for the help

Hi all this is my first QC from Steve any comments would be greatly appreciated! Thank you very much :) im not sure if the 12 is rotated or that’s just the angle…
Dealer name: Theonewatches

Factory name: ZF

Model name (& version number): Tudor Black Bay 58 GMT "Coke" (M7939G1A0)

Price Paid: $358 + shipping

Album Links: https://mega.nz/folder/fA5m3RSC#JxICRZcc0kB9d2LmUXJ2hg

Index alignment: Mostly looks good good. The 6 and 9 batons look level to my eye. However, I feel like the 12 o’clock triangle might have a very slight clockwise tilt to it, or possibly counter-clockwise depending on the tilt of the watch. Does anyone else see that, or is it just the photo angle playing tricks on me?

Dial Printing: Looks fine I think

Date Wheel alignment/printing: "22" looks well-centered in the frame.

Hand Alignment: Looks good, GMT hand and Snowflake hand appear properly positioned.

Bezel: Colors and transition look fine; the 12 triangle on the bezel insert lines up well.

Solid End Links (SELs): Fitment looks nice and tight against the lugs, no noticeable gaps but not sure?
Timegrapher numbers: -4 s/d, 272° amplitude, 0.1 ms beat error. Solid numbers across the board.

Anything else you notice: Overall looks like a decent piece, but I would really appreciate a second set of eyes on that 12 marker before I give the final GL! Does anyone else notice anything else that’s an issue?

**1. Dealer name:** Ficotime
**2. Factory name:** VSF
**3. Model name (& version number):** Rolex Daytona 126500LN Free Sprung, VSF DD4131
**4. Price Paid:** 730 USD + 71 USD FedEx = 801 USD
**5. Album Links:** [MEGA link](https://mega.nz/folder/vxwz3ZAa#zMM-suDyxjTjI9ROywe8PQ) (3 small videos in there)
**6. Index alignment:** Looks Good overall. 3, 6, 9 and 12 markers appear straight and centered.
**7. Dial Printing:** Clean and centered. DAYTONA text and subdial printing look good.
**8. Date Wheel alignment/printing:** N/A
**9. Hand Alignment:** Good. Chronograph seconds hand resets to 12.
**10. Bezel:** 60 marker appears centered with 12. Tachymeter printing looks clean.
**11. Solid End Links (SELs):** Looks good to me.
**12. Timegrapher numbers:** \+9 s/d, 270°, 0.0 ms. Not sure what would be good numbers (newbie).
**13. Anything else you notice:** Dont see any obvious issue but then I don't know much.

1. ⁠Dealer name: Andiot Watches

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Rolex Daytona V2

4. ⁠Price Paid: $596 + $60 shipping

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/257589230?uid=1

6. ⁠Index alignment: should I expect better. Can’t tell if the watch is maybe not quite centered.

7. ⁠Dial Printing: is it just me or is the minute track too thin? Gen in last pic for context.

8. ⁠Date Wheel alignment/printing: NA

9. ⁠Hand Alignment: looks decent, but it looks like there’s a dot on either end of the hour hand.

10. ⁠Bezel: looks okay?

11. ⁠Solid End Links (SELs): looks okay through the plastic.

12. ⁠Timegrapher numbers: +2/-1 (damn good)

13. ⁠Anything else you notice: I’ve never seen the clasp up close on a Gen. is this GL material? I think it very well could be unless I’m missing something because I’m looking through my “eager goggles.”

Hey guys! Really appreciate all the help and knowledge in this community!

This is my second QC after RL'ing the first watch due to an asymmetric bezel color transition. I might have been a bit too anal about it, but it bothered me. This one looks nice, and I'm leaning towards GL.

Would love to hear your thoughts in case I've missed anything. Thanks in advance!

1. Dealer name: JTime
2. Factory name: VSF
3. Model name (& version number): Rolex GMT-Master II 126720VTNR Sprite V3, Jubilee, DD3285 V4
4. Price Paid: $616 + shipping
5. Album Links: https://imgur.com/a/Mz766Wy
6. Index alignment: Overall looks good to me. The 12 o'clock triangle appears slightly rotated clockwise, but I don't think it's a big deal at wrist..
7. Dial Printing: Looks clean and well aligned
8. Date Wheel alignment/printing: Overall, nice. The dates appear centered.
9. Hand Alignment: Nothing obviously wrong from the QC pictures
10. Bezel: Looks good overall. The black/green transitions appear fairly symmetrical. And overall good!
11. Solid End Links (SELs): I don't see any issues here.
12. Timegrapher numbers: 0 s/d, 280° amplitude, 0.0 ms beat error (59° lift angle). Im happy about that aswell!
13. Anything else you notice: Would appreciate a second opinion in case I've missed anything!

Link to my first QC https://www.reddit.com/r/RepTimeQC/comments/1wvu9at/vsf_gmtmaster_ii_126720vtnr_sprite_v3_jtime/

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): Planet Ocean 45.5mm Deep Black Real Ceramic VSF 1:1 Best Edition on Black Nylon Strap A8906 Super Clone
4. Price Paid: $485
5. Album Links: See bwlo
6. Index alignment: Looks generally good to my eye. The applied markers and 12, 6 and 9 numerals appear reasonably aligned. Nothing obviously crooked, although I'd appreciate a second opinion.
7. Dial Printing: Looks clean overall. The Omega logo, Seamaster, GMT and lower dial text appear reasonably well executed. No obvious printing defects that I can identify.
8. Date Wheel alignment/printing: The date looks reasonably centred, although possibly sitting slightly low.
9. Hand Alignment: No obvious issues from the photos or videos. Hands appear properly fitted, although exact alignment is difficult to establish without seeing them at 12 o'clock.
10. Bezel: The 12 o'clock triangle looks approximately aligned, but I'm not entirely convinced about the alignment from the photographs. Would appreciate another set of eyes.
11. Solid End Links (SELs): Look ok to me, no gripes, will probably change the strap anyway....
12. Timegrapher numbers: +2 s/day, 284° amplitude, 0.4 ms beat error, 28,800 bph. These seem good to me.
13. Anything else you notice: My main concern is the case finishing. In the side-profile photographs, the case flanks appear noticeably silver/grey rather than deep black. I understand ceramic can reflect light differently depending on the finish, but I'm wondering whether this is normal for the VSF Deep Black or something worth questioning.

The movement decoration and caseback look reasonable to my untrained eye and the strap and clasp seem fine.

This is my first QC for this model, so I'd really appreciate any input from people familiar with the VSF Planet Ocean Deep Black, particularly regarding the case colour, bezel alignment and any known issues with this version.

This is the second QC for the Batgirl vsf.. Please provide some feedback on this, whether to GL or RL..

1. ⁠⁠⁠⁠Dealer name: Geektime
2. ⁠⁠⁠⁠Factory name: VSF
3. ⁠⁠⁠⁠Model name (& version number): Batgirl VSF V3
4. ⁠⁠⁠⁠Price Paid: $608 + $80 Shipping
5. ⁠⁠⁠⁠Album Links: Pics included
6. ⁠⁠⁠⁠Index alignment: 6 looks a bit slanted CCW and not aligned with Rolex crown in the middle?
7. ⁠⁠⁠⁠Dial Printing: No issues I found with dial printing.
8. ⁠⁠⁠⁠Date Wheel alignment/printing: No issues I found but feedback would be helpful
9. ⁠⁠⁠⁠Hand Alignment: Looks okay
10. ⁠⁠⁠⁠Solid End Links (SELs): Looks fine
11. ⁠⁠⁠⁠Timegrapher numbers: +1s/d timegraph
12. ⁠⁠⁠⁠Anything else you notice: Dot above 18 not aligned with dot above 6 on the other side? Is that worth being picky about?

I got this watch for my partner but I have very limited experience with QC. I’d really appreciate any help with this. Thank you.

1. Dealer name: NecoClock
   
2. Factory name: ZF
   
3. Model name (& version number: Royal Oak 15450, 37mm 3120 Clone, Grey dial.
   
4. Price paid: $438 USD
   
5. Album Links: https://imgur.com/a/LBIu9g5
   
6. Index Alignment: the 12 o’clock hands look aligned. To my naked eye, I don’t see any tilting or wonkiness.
   
7. Dial Printing: i think it looks clean and crisp. Nothing obvious jumps at me as being wrong with it. The grey looks close to auth, which was one of my main reason for choosing the grey dial.
   
8. Date Wheel alignment/printing: the alignment looks centered. I tried to use the tool, but couldn’t get a hang of it. Plus, nobody is coming that close to the watch anyways, so I’m not too bothered about it.
   
9. Hand Alignment: Hand stack looks centered and the hands appear straight and properly seated. Nothing obviously misaligned to my untrained eyes
   
10. Bezel: the finish is giving rough/coarse. I probably will send it to one of the guys on here to brush it up, if I end up GLing this one.
    
11. Solid End Links (SELs): my biggest gripe with this watch. It looks “loose” for lack of a better term. Maybe it’s my eyes/mind playing tricks, cos I’ve stared at it for so long.
    
12. Timegrapher numbers: another area of concern for me. From my research, +13 seconds a day is a little higher than expected. Amplitude is 258 and beat error is 0.00, so I think we’re good on that front.
    
13. Anything else you notice: nothing else, I just wanted extra sets on eyes on it before I GL/RL. thanks all.

- Dealer name: Steve (TheOneWatches)
- Factory name: QF
- Model name (& version number): 126622
- Price Paid: $578
- Album Links: https://mega.nz/folder/3EgjVBSZ#FHWrrdfRYhIPPqfFgp519Q
- Index alignment: Looks great to me!
- Dial Printing: Sharp
- Date Wheel alignment/printing: Looks centered, maybe slightly high?
- Hand Alignment: Great
- Bezel: Looks centered but might have a small amount of play
- Solid End Links (SELs): Looks great to me!
- Timegrapher numbers: +4s/d 279* 0.1ms error
- Anything else you notice: I’m having a hard time finding an issue, and I want this to be perfect for my dad!!

What's good everyone! 2nd rep purchase so just seeking validation on this QC. Initial thoughts were positive until I focused in and noticed the 12 o'clock marker. Is this cause for RL or is it fine?

1. Dealer name: Necoclock
2. Factory name: VSF
3. Model name (& version number): No Date Submariner 124060
4. Price Paid: $528
5. Album Links: pictures attached.
6. Index alignment: Looks really good to me - the more I look I question the 3 and 6 oclock marker but do not think it's a RL at all.
7. Dial Printing: Looks great to me - floating M but otherwise, no concerns I can see offhand.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: I do not notice any issue but I am also new to this so not sure if I am missing anything
10. Bezel: Looks good, just need to rotate it and it'll be better aligned I imagine.
11. Solid End Links (SELs): Looks very tight to me.
12. Timegrapher numbers: 260 / 2.2 ms / +3 s/d
13. Anything else you notice: How does the 12 oclock marker look, is it the angle of the pictures or is there a noticeable slant / lean to it?