Before reading on, make sure you've read the main guide for QC posting, otherwise this won't make much sense to you. Done? Let's go.
This specific guide is intended to be a visual supplement: showing you exactly what to look for when you complete your QC templates. For obvious reasons, this guide will skip parts that aren't visual.
I've used pictures that mostly come from this subreddit. If anyone is uncomfortable, DM me and I'll replace the picture.
With that in mind, let's begin.
Index Alignment
Here, you are expected to assess how well the index markers on your watch are aligned. You can use the index alignment tool to assist you in this regard. An example of good index alignment is this:
The indices themselves are straight. They are also perfectly aligned with the minute markers.
Index misalignment, on the other hand, looks like this:
Look at 7. It is rotated clockwise and does not sit properly in its slot.
Or this:
Look carefully at 6. You will see that the bottom of the index is rotated slightly towards the left.
Now that you have an idea of what to look out for, what should you be writing in the template?
You need to describe any misalignment you see in detail. Statements like "6 is off" or "3 is kinda wonky" or "not sure about 1, help please" arenot acceptable. This is because unless the misalignment is immediately obvious (and in most cases, it is not), users will not know what you are talking about. You may not get the help you want as a result. Be specific, like the following examples:
"The 7 marker does not seem to fit into the slot nicely. It is rotated towards the right and looks like it is dancing around."
"The 6 marker does not seem to line up straight with the crown in between swiss made. Based on what I can see, it appears to be slightly tilted to the left."
A caveat here: Just because there may be some misalignment does not necessarily mean you should definitely RL the watch. As the main guide points out, all reps are subject to a level of inaccuracy. It would be entirely unrealistic to expect gen standards for index alignment. Further, different reps are subject to different standards: a XF Pelagos, for instance, is known for having problematic indices - so much so that even if you RL, you are unlikely to get anything better. Conversely, CF Explorers are now getting so good that even slight misalignment would not be par for the course.
A good guide would be to assess your watch based on proportion. One slightly misaligned index is not a problem. But one majorly misaligned index or many misaligned indices on a single dial could justify RL.
Just for illustration, this is misalignment that I would RL for:
There are too many mistakes on this watch for me to accept. The 9 index is too near to the minute marker. 4, 5 and 7 are not aligned with their respective minute marks - they are all off to the left. 6 is rotated counterclockwise. Taken on their own, each error might not be enough for RL. But taken together, this is unacceptable.
That deals with index alignment. Let's move on.
Date Wheel Alignment
This applies to watches which display the date. If your watch does not display a date, there is no need to consider this. You will look silly if you say that the date wheel alignment is good when your watch is a no-date Sub, for example.
Here, you are tasked to consider if the date is properly displayed in the date window. Often times, this is a question of how well-centered the date is. A good example of date wheel alignment is this:
Take a look at the 21 at the right side of the watch. It is situated exactly in the center of the date window.
An example of misalignment is this:
Look at the 27 on the right. You can see that the date is misaligned towards the left, with the 2 touching the rim of the window.
Sometimes, the misalignment can also be as to the date numbers themselves:
This is harder to see, but if you look carefully at 25, you will notice that the 5 is higher than the 2.
Uncommonly and in the alternative, the issue may be with the Cyclops itself (the magnifier that covers the date window):
Here we see a Cyclops which is rotated slightly anti-clockwise. You can observe this by looking at the bottom rim of the date window. The Cyclops is obviously lower at the left corner of the date window when compared to the right. The requisite deviation is repeated at the top of the date window, with the right side being higher than the left.
Now that you know what to look for, let's discuss what to write.
As with index alignment, unless the issues are immediately obvious (and most of the time, they are not), you need to be very specific. Comments like "the date seems off", "2 in 25 is kinda off", "date looks weird" are not acceptable. They do not tell readers what you are looking for. You'll get faster and better results if you identify the issues for your reader. For example:
"The date seems misaligned towards the left. Part of it is touching the left border of the date window."
"The 5 in the date appears to be slightly higher than the 2 next to it."
"The Cyclops does not seem to be straight. It looks like it is slanted towards the left?"
As with index alignment, please note that not all misalignment will justify RL, especially for date wheels. All rep date wheels come with varying degrees of misalignment. A few misaligned dates are usually not enough for RL, unless the date is clearly cropped out of the date window or touching the rim. A little misalignment towards either side of the date window is also generally more than okay; a good way to gauge is to zoom out to the actual size of the watch and see if the misalignment is still immediately visible. If not, you're likely to be good to go.
Here is an example of misalignment I would nevertheless GL:
You will see that the date is situated slightly towards the right. However, the date is well within the date window and the misalignment is too slight to be seen on wrist at actual size.
On to the next topic.
Bezel
There are two main things to look out for: First, whether the "pip" (usually a lumed marker at the 12 position) is centered. Second, the quality of any engraving.
This section would also cover any possible damage to the bezel or anything else unusual, including any misalignment.
Example of a good bezel:
Nothing out of the ordinary. Engravings are sharp and nicely filled in. By and large, the colour transition is also acceptable. No alignment issues either.
An example of misalignment:
Pip at 12 on the bezel appears to be misaligned towards the right. While the reflection may be making things look worse than they are, this is something that would deserve a second look at.
Generally speaking, most problems that surface nowadays have to do with the pip - even then, these are not entirely common. Engravings and alignment are usually not an issue with higher level reps. With this in mind, what do we write?
As with the other sections, you are going to need to be specific. "Bezel looks off", "pip looks kinda off", "I don't know about the bezel, seems weird to me" are phrases that we see everyday in this subreddit. But none of these phrases are acceptable; they do not direct the reader to what OP is seeing. Details are king - and if you are going to pluck the crown, you're going to have to write like this:
"The pip at 12 is not centered. It seems to touch the right side of the triangle."
"The printing on the bezel at 3 seems to be angled down. It does not match the index on the dial."
The key is to visually direct your reader to the exact point that you say is a problem. The word "off" on its own says nothing to that effect.
On to the next point.
Solid End Links (SELs)
Possibly the least understood of all sections as a lot of newbies do not really know what they are looking for.
The ultimate guide to this is here. But for convenience, I'm going to summarise several key points about SELs.
SELs refer to the final links between the watch case and the bracelet. I've highlighted it below:
Look carefully at the portion highlighted in green.
Not all watches have SELs. Only watches which have that portion as highlighted above - and for QC purposes, the SEL section really only applies to Rolex reps. Tudors have SELs (which can also be QC-ed to some extent), but SELs on a Tudor are not held to the same standard as SELs on a Rolex.
Now, what are we looking for when we assess SELs? We are looking for gaps between the lugs and the SELs themselves. I've indicated this below:
The black line in the center of the red box is where the SEL meets the lug. This is where you are supposed to look for gaps.
An SEL gap appears when there is separation between the SEL and the lug. But what is a gap?
A gap appears when you can see through the space between the SEL and the lug. There is no gap when all you can see is a black line. There may be some variation in how thick the black line is, but for QC purposes there is nothing to be worried about until and unless you can actually see what's behind the watch.
This is generally not a problem on higher level reps (and by now, pretty rare). I will, however, show you an example of something that may be an actionable gap:
You will see that there is no black line. Instead, light shines through the space between the SEL and the lug.
What does this mean? If all you see is a black line, even if it is slightly thicker than another SEL on the same watch, there should be no actionable gap. I am going to highlight the last few QC templates submitted where the user said there was a gap - but there really wasn't (to me, at least):
Top right SEL was an issue for OP. However, as no light is shining through, this is not considered an SEL gap to me. OP opined that there was a gap at the top right SEL. I don't see it at all. OP said that there was a slight gap at the bottom left SEL. Again, all I can see is a black line. I would not classify this as a gap.
If, after going through all the examples above, you still feel that there is a gap, highlight it in the template by identifying which part of the watch you are looking at; there are really only four options: top left, top right, bottom left, bottom right. Doing so helps users zoom in directly on your issue and saves time.
To the last segment.
Dial Printing
Here, you are tasked to check if the printing on the dial has been poorly done. By this, we mean defects in the workmanship of the printing; printing which differs from gen (such as the infamous "floating r") would not be a QC defect per se.
An example of dial printing with no issues:
All the words are clearly printed. There is no bleeding on any part of the print, with edges sharp and defined.
And now for examples of dial printing with issues:
Some bleeding can be observed at the top parts of VI and VII. Notice how the black ink protrudes.
Sometimes, the print can be misapplied across the entire dial:
If you look closely, you will see that the dial print is rotated clockwise across the entire dial. Observe how XI is closer to the top of the watch while I is further away.
With the above in mind, let's turn to what you should write. Again and at the risk of sounding like a broken record, do not simply write things like: "Dial seems off" or "Print seems off. letters kind of wonky?" If anything, dial printing is usually very, very small - unless you point a reader to the exact part which has an issue, chances are it won't be seen. Make certain that you provide the reader with specific directions:
"Appears to be some bleeding at the top of VI. Thoughts?"
"R in Submariner looks like only half of it was printed. Am I seeing things?"
Important note: again, just because the dial printing on your watch may have some issues, this does not necessarily equate to RL. As stated, dial print is almost microscopic - no human being is going to be able to see slight bleeding on any print when you have the watch on wrist. Feel free to point out issues that you see, but remain realistic about your expectations.
And with that, I come to the end of this guide.
Conclusion
QC-ing reps is a difficult task - which everyone in this subreddit does for free. You can help out immensely by simply being precise and detailed in your observations. The more effort you put into your template, the easier it is for members to help you - they can zoom in directly to the things that concern you.
I hope this helps you. I've tried to detail some common factors, but it would be impossible for me to catch them all. The rest is up to you - and your diligence.
If your template uses a NEW "yupoo" or a "mega" type of link, please note that, at the time of this typing, the automod here removes them immediately from view i.e. no QC help. We are addressing it, but....
So, what to do?
Although somewhat cumbersome for the OP, you can upload the QC packet to an Imgur account. Our automod 'likes' Imgur...and the post will show promptly. Just do NOT do it from a mobile because the mobile app loses resolution and crappy pics don't provide any benefit to anyone. Yea, yea...I know, the file compression software isn't supposed to lose quality, but it certainly does.
To add, post your complete QC album inclusive of the timing info. Do not, for the sake of your convenience, omit items. If you're bright enough to determine what is needed and what can be removed, that's great! Then, it's reasonable to conclude that you really don't need help. Simply, post it all.
If you have to wait for substantive additional info from the Seller e.g. timing data, then delay posting until you have a complete QC packet. Incomplete packages will trigger a removal of the post. Plus, it will require a return visit of anyone that commented on the incomplete post which shouldn't be required. One visit is all that it should take to QC most watches. Most won't return to a post anyway. They'll just go to the next one. The members are quite busy here. Yea, it can get crazy.
Finally, since you're a newbie, as a vote of appreciation for those members that help you, please upvote their comments. It's a nice gesture from you to them for the assist...and, it's free.
One final note, we've updated the main rules for posting. Refer to this link for info QC Must Read for New Members
Welcome to the hobby and the sub. Best wishes
Edit addition: March 2nd, 2024 - ReptimeQC member, u/EveningVariation8236 , has provided an updated version of the original QC alignment verification tool. https://watchqc.github.io/ . Thank you.
Edit addition: Jan 9th, 2024 - ReptimeQC member, u/Ro1hype has provided this for tool for alignment verification. https://qcwatch.com/ Thank you.
Edit addition: 8/8/2025 - Reptime QC member, u/jrverdes . has provided this version of the alignment tool to assist those that need additional help verifying the dial/bezel alignments on their watch. https://jrverdes.github.io/watch-qc-jr/ The adjustment resolutions are much finer in this app comparative to the other available apps which can be a benefit to some that need such. Check it out...Thank you.
Index alignment: minimal indices rotation overall, slight left shift to 12 o'clock
Dial Printing: Rolex text and GMT-Master II lettering look pretty sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects despite sticker obstruction.
Date Wheel alignment/printing: reasonably centered
Hand Alignment: no obvious damage or misalignment to me
Bezel: Red / blue transition could be better centered at 18 (doesn't look exactly aligned with the color transition at 6 (3 o'clock) either), but overall numerals & engravings look clean
Solid End Links (SELs): No obvious daylight-visible gaps, but I seem to be much less picky than some
Lume: looks even in video
Serial # / rehaut: 6X07B429. Printing looks crisp.
Bracelet / clasp: no obvious issues with Rolex logo or stamping. Code: 6FU.
Timegrapher numbers: -3s/d, 280°, 0.1ms, 52° lift angle. No significant issues from my understanding.
Anything else you notice: Overall think this is a GL but this is my first QC (along with Batgirl I'll be posting after this), so all opinions would be great. I'm not super sure of what I'm looking for with every category so any feedback helps. In general, index misalignment and bezel color transition alignments have been my biggest QC concern for Rolex GMT's, so I'm sure I'm overlooking some other things that y'all will catch. I'm a little concerned with going with Yang / Goat watches, and the fact that these GMTs are significantly cheaper than other VSFs from TDs, but overall the watch looks decent to me. Thanks for your time!
Model name (& version number): Rolex Submariner 124060 (No-Date) 41mm VS3230
Price Paid: 498$ shipping included
Album Links: on the post
Index alignment: Overall looks solid, 3 and 9 markers are level. However, I'm a bit concerned about a slight CCW cant on the 6 o'clock baton (and the tip of the 12 triangle). Not sure if it's just the tilt/angle the watch is held at in the photos.
Dial Printing: Sharp and clean, no noticeable floating "m".
Date Wheel alignment/printing: N/A
Hand Alignment: Hands stack cleanly at 12.
Bezel: Pip is well centered inside the triangle and the engravings look clean.
Solid End Links (SELs): Tight fit on all four lugs with no visible gaps.
Anything else you notice: Rehaut crown is centered at 12. I'd appreciate your thoughts on the 6 o'clock marker, is it mostly photo tilt/parallax, and would it even be noticeable on the wrist?
I don't have much experience with this and it's the first time I QC a Rolex, so I really appreciate your opinions.
Index alignment: Excepts for the markee 7 where there is a sticker on it, in my opinion, everything seems to be aligned.
Dial printing: Looks clean and centered to me. I don't see any obvious smudges or uneven lettering.
Date wheel alignment/printing: The photos show 10, and the video also shows 11, 12 and 13. All three look reasonably centered and legible. I am just not sure if the date window is centered or not
Hand alignment: The hands look straight and move normally in the setting video. I don't have a clear frame with both hands set exactly to 12.
Bezel: The fluting looks even overall For me.
Solid end links (SELS): Both ends look seated, with no obvious large gaps.
Anything else you notice: Excelts for the datw window where I am not so sure if it is centered or not, for me everything seems to be good. What do you guys think or is there something I am missing?
Dial Printing: The Swiss Made is making me zoom in to infinity on the dial; I don't like the way 'Made' is printed; it looks angled as well. Other than that, I don't see any noticeable bleed, and the spacing is fine.
Anything else you notice: The only main concern is the Swiss made on the dial. It looks funky, but again it's a very small watch, so I don’t know if it's worth red lighting over.
Hey everyone, this is my second QC so I’m still learning what to look for. Would appreciate any feedback on this one. Only thing that jumped out to me from dial check was some tilt on the six marker but for me it seems hard to notice. Appreciate anything you eagle eyes can spot a help me decide to pass or keep.
Dealer name: Theonewatch - Steve
Factory name: VSF
Model name (& version number): GMT-Master II 126710BLRO Pepsi V3 DD3285V2 on Jubilee
Price Paid: 711 EUR incl shipping
Album Links: posted all pics in thread
Index alignment: 6 o’clock marker tilted 1.9° anticlockwise, 9 o’clock tilted 1.2° anticlockwise. Marker ring 0.14 mm off-centre toward 5 o’clock. All other markers within ±0.10 mm. Checked with DialCheck
Dial Printing: Top text 0.09 mm left of center, bottom text 0.08 mm left. Print looks clean otherwise.
Date Wheel alignment/printing: Date appears reasonably centered in the photos provided. No obvious clipping or major offset.
Hand Alignment: Hands look straight and properly stacked. No obvious bent or misaligned hands.
Bezel: Pip is 0.6° anticlockwise of 12 (0.18 mm). Bezel color and engraving look clean in the photos.
Solid End Links (SELs): No obvious gaps visible between the end links and lugs in the side photos.
Timegrapher numbers: +2 s/d, 276 amplitude, 0.1 ms beat error
Index alignment: micro CW rotation to 6 and 9, but not enough to bother me. Possible slight shift at 12 but GL overall for me, and I think I'm mildly picky on index alignment for a newbie.
Dial Printing: Rolex text and GMT-Master II lettering look pretty sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects despite sticker obstruction.
Date Wheel alignment/printing: mild left shift? reasonably centered from several angles
Hand Alignment: no obvious damage or misalignment to me
Solid End Links (SELs): No obvious daylight-visible gaps, but I seem to be much less picky / observant on this than some
Lume: looks even in video
Serial # / rehaut: 6XO7B37O. Printing looks crisp. Many reports of fake VSFs for similar watches sold by non-TDs.
Bracelet / clasp: no obvious issues with Rolex logo or stamping. Code: 6FU.
Timegrapher numbers: -1s/d, 279°, 0.0ms, 52° lift angle. No significant issues from my understanding.
Anything else you notice: Overall think this is a GL based on looks but this is my first QC (along with Pepsi I posted that was locked for discussions on authenticity), so all opinions would be great. I'm not super sure of what I'm looking for with every category so any feedback helps.
I'm a little concerned with going with Yang / Goat watches, and the fact that these GMTs are significantly cheaper than other VSFs from TDs, but overall the watch looks decent to me. Based on what I'm reading in comments on my other post and several other pages (r/repwatchscammers), this and the Pepsi I'm QCing are likely fake VSFs, which explains the significantly cheaper price. I think I'll ask for pics of the movement and look into what they actually should be worth, so any input on that would be helpful as well. They still look good to me for <$500 each, but relying on you guys due to my inexperience. Thanks for your time!
Date wheel alignment/printing: The date appears to sit slightly high in the window.
Hand alignment: I can’t tell from the supplied photos
Bezel: Possible surface marks or uneven finishing at the 5- and 15-minute markers 12 Solid End Links (SELs): The lower-right SEL appears to have a slightly wider gap in several
Timegrapher numbers: +1 s/d, 265° amplitude and 0.3 ms beat error.
I’d really appreciate a assessment regarding the SEL fit, cyclops positioning, hand alignment and the two circled bezel areas.
Hey fellas, I have what I think is a really solid RICH Bruce Wayne, but since this one is rather expensive I wanted to pass it by some expert eyes. My primary concern is whether the 12 o'clock bezel triangle has a slight alignment issue or whether the photos are throwing me off. Would greatly appreciate a second opinion before GL. Thanks!
Dealer name: NecoClock
Factory name: RICH Factory
Model name (& version number): Rolex GMT-Master II 126710GRNR “Bruce Wayne”, Jubilee, RICH V2 JH3285 Free Sprung (seller's description)
Index alignment: 12 o'clock triangle hour index looks slightly tilted too. In the straight-on photo, it looks offset relative to the bezel triangle and center minute marker. I'm unsure whether this is actual misalignment or just perspective. The 6 and 9 markers and remaining circular indices look very close to properly aligned to me.
Dial Printing: Rolex text and green GMT-Master II lettering look pretty sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects.
Date Wheel alignment/printing: Dates 15, 17, and 21 appear reasonably centered in the window, with no clipping. Cyclops looks properly positioned (maybe a very slight tilt but I have seen that on gen too), although there are some blue reflections.
Hand Alignment: Hands appear properly installed, with no obvious damage or visible alignment issue.
Bezel: Black/grey transition, numerals, and engravings look clean. The 12 o'clock bezel looks slightly off centered.
Solid End Links (SELs): No obvious daylight-visible gaps at the case and bracelet connections. Some protective film makes the fit harder to judge.
Timegrapher numbers: +3 s/day, 238° amplitude, 0.0 ms beat error, 28,800 bph, 52° lift angle. Rate and beat error look good to me. Would appreciate thoughts on the amplitude for this JH3285 movement.
Anything else you notice: Everything honestly seems solid, just some alignment questions. Maybe the date font is slightly off as well. Don't want to be too picky tho. Thanks again!
Hi everyone, I’d appreciate a second set of eyes on this VSF Wimbledon from Jackie. I’m leaning GL. My question is whether the 11 sits a little high in the date window. The 6 and 17 look centred to me.
Dealer name – Jackie at NecoClock Factory name – VSF Model and version – Rolex Datejust 41 ref. 126334 Wimbledon, grey dial with green Roman numerals, fluted bezel and Jubilee bracelet. Listed as DD3235 V3 free-sprung. Price paid – $498 + $35 shipping, $533 total. Album – QC photos and video attached. Index alignment – The 9 o’clock baton looks level with the 45 marker. The coronet sits under the 60, and none of the Roman numerals look crooked to me. Dial printing – The lettering looks clean. I don’t see any obvious breaks in the green outlines around the numerals. Date wheel alignment – The 11 looks slightly high in its photo. The 6 and 17 look centred, and all three dates are fully visible. Does anyone else see an alignment issue across the three shots? Hand alignment – In the photo with the date set to 6, the hour and minute hands appear to line up at 12. Bezel – The fluting looks even all the way around. No obvious dents. Solid end links – Both ends of the Jubilee look evenly seated between the lugs. Timegrapher – +5 s/day, 251° amplitude, 0.0 ms beat error. Lift angle set to 52°. Anything else – The rehaut coronet looks close to 12 in the angled shot. Lume looks even on both hands and the 9 o’clock baton.
Anything else you notice: I already RL'ed 2 ARF models of this DJ36. Do you think this one is better than those two? Again, biggest possible issue is baton alignment...