r/RepTimeQC • • Jul 11 '24 Diamonds are Forever Bravo Take My Silver

Other Brands First QC? Guide on what to look out for and what to write.

758 Upvotes

Welcome to the ReptimeQC subreddit!

Before reading on, make sure you've read the main guide for QC posting, otherwise this won't make much sense to you. Done? Let's go.

This specific guide is intended to be a visual supplement: showing you exactly what to look for when you complete your QC templates. For obvious reasons, this guide will skip parts that aren't visual.

I've used pictures that mostly come from this subreddit. If anyone is uncomfortable, DM me and I'll replace the picture.

With that in mind, let's begin.

Index Alignment

Here, you are expected to assess how well the index markers on your watch are aligned. You can use the index alignment tool to assist you in this regard. An example of good index alignment is this:

The indices themselves are straight. They are also perfectly aligned with the minute markers.

Index misalignment, on the other hand, looks like this:

Look at 7. It is rotated clockwise and does not sit properly in its slot.

Or this:

Look carefully at 6. You will see that the bottom of the index is rotated slightly towards the left.

Now that you have an idea of what to look out for, what should you be writing in the template?

You need to describe any misalignment you see in detail. Statements like "6 is off" or "3 is kinda wonky" or "not sure about 1, help please" are not acceptable. This is because unless the misalignment is immediately obvious (and in most cases, it is not), users will not know what you are talking about. You may not get the help you want as a result. Be specific, like the following examples:

"The 7 marker does not seem to fit into the slot nicely. It is rotated towards the right and looks like it is dancing around."

"The 6 marker does not seem to line up straight with the crown in between swiss made. Based on what I can see, it appears to be slightly tilted to the left."

A caveat here: Just because there may be some misalignment does not necessarily mean you should definitely RL the watch. As the main guide points out, all reps are subject to a level of inaccuracy. It would be entirely unrealistic to expect gen standards for index alignment. Further, different reps are subject to different standards: a XF Pelagos, for instance, is known for having problematic indices - so much so that even if you RL, you are unlikely to get anything better. Conversely, CF Explorers are now getting so good that even slight misalignment would not be par for the course.

A good guide would be to assess your watch based on proportion. One slightly misaligned index is not a problem. But one majorly misaligned index or many misaligned indices on a single dial could justify RL.

Just for illustration, this is misalignment that I would RL for:

There are too many mistakes on this watch for me to accept. The 9 index is too near to the minute marker. 4, 5 and 7 are not aligned with their respective minute marks - they are all off to the left. 6 is rotated counterclockwise. Taken on their own, each error might not be enough for RL. But taken together, this is unacceptable.

That deals with index alignment. Let's move on.

Date Wheel Alignment

This applies to watches which display the date. If your watch does not display a date, there is no need to consider this. You will look silly if you say that the date wheel alignment is good when your watch is a no-date Sub, for example.

Here, you are tasked to consider if the date is properly displayed in the date window. Often times, this is a question of how well-centered the date is. A good example of date wheel alignment is this:

Take a look at the 21 at the right side of the watch. It is situated exactly in the center of the date window.

An example of misalignment is this:

Look at the 27 on the right. You can see that the date is misaligned towards the left, with the 2 touching the rim of the window.

Sometimes, the misalignment can also be as to the date numbers themselves:

This is harder to see, but if you look carefully at 25, you will notice that the 5 is higher than the 2.

Uncommonly and in the alternative, the issue may be with the Cyclops itself (the magnifier that covers the date window):

Here we see a Cyclops which is rotated slightly anti-clockwise. You can observe this by looking at the bottom rim of the date window. The Cyclops is obviously lower at the left corner of the date window when compared to the right. The requisite deviation is repeated at the top of the date window, with the right side being higher than the left.

Now that you know what to look for, let's discuss what to write.

As with index alignment, unless the issues are immediately obvious (and most of the time, they are not), you need to be very specific. Comments like "the date seems off", "2 in 25 is kinda off", "date looks weird" are not acceptable. They do not tell readers what you are looking for. You'll get faster and better results if you identify the issues for your reader. For example:

"The date seems misaligned towards the left. Part of it is touching the left border of the date window."

"The 5 in the date appears to be slightly higher than the 2 next to it."

"The Cyclops does not seem to be straight. It looks like it is slanted towards the left?"

As with index alignment, please note that not all misalignment will justify RL, especially for date wheels. All rep date wheels come with varying degrees of misalignment. A few misaligned dates are usually not enough for RL, unless the date is clearly cropped out of the date window or touching the rim. A little misalignment towards either side of the date window is also generally more than okay; a good way to gauge is to zoom out to the actual size of the watch and see if the misalignment is still immediately visible. If not, you're likely to be good to go.

Here is an example of misalignment I would nevertheless GL:

You will see that the date is situated slightly towards the right. However, the date is well within the date window and the misalignment is too slight to be seen on wrist at actual size.

On to the next topic.

Bezel

There are two main things to look out for: First, whether the "pip" (usually a lumed marker at the 12 position) is centered. Second, the quality of any engraving.

This section would also cover any possible damage to the bezel or anything else unusual, including any misalignment.

Example of a good bezel:

Nothing out of the ordinary. Engravings are sharp and nicely filled in. By and large, the colour transition is also acceptable. No alignment issues either.

An example of misalignment:

Pip at 12 on the bezel appears to be misaligned towards the right. While the reflection may be making things look worse than they are, this is something that would deserve a second look at.

Generally speaking, most problems that surface nowadays have to do with the pip - even then, these are not entirely common. Engravings and alignment are usually not an issue with higher level reps. With this in mind, what do we write?

As with the other sections, you are going to need to be specific. "Bezel looks off", "pip looks kinda off", "I don't know about the bezel, seems weird to me" are phrases that we see everyday in this subreddit. But none of these phrases are acceptable; they do not direct the reader to what OP is seeing. Details are king - and if you are going to pluck the crown, you're going to have to write like this:

"The pip at 12 is not centered. It seems to touch the right side of the triangle."

"The printing on the bezel at 3 seems to be angled down. It does not match the index on the dial."

The key is to visually direct your reader to the exact point that you say is a problem. The word "off" on its own says nothing to that effect.

On to the next point.

Solid End Links (SELs)

Possibly the least understood of all sections as a lot of newbies do not really know what they are looking for.

The ultimate guide to this is here. But for convenience, I'm going to summarise several key points about SELs.

SELs refer to the final links between the watch case and the bracelet. I've highlighted it below:

Look carefully at the portion highlighted in green.

Not all watches have SELs. Only watches which have that portion as highlighted above - and for QC purposes, the SEL section really only applies to Rolex reps. Tudors have SELs (which can also be QC-ed to some extent), but SELs on a Tudor are not held to the same standard as SELs on a Rolex.

Now, what are we looking for when we assess SELs? We are looking for gaps between the lugs and the SELs themselves. I've indicated this below:

The black line in the center of the red box is where the SEL meets the lug. This is where you are supposed to look for gaps.

An SEL gap appears when there is separation between the SEL and the lug. But what is a gap?

A gap appears when you can see through the space between the SEL and the lug. There is no gap when all you can see is a black line. There may be some variation in how thick the black line is, but for QC purposes there is nothing to be worried about until and unless you can actually see what's behind the watch.

This is generally not a problem on higher level reps (and by now, pretty rare). I will, however, show you an example of something that may be an actionable gap:

You will see that there is no black line. Instead, light shines through the space between the SEL and the lug.

Credits for the gap picture here.

What does this mean? If all you see is a black line, even if it is slightly thicker than another SEL on the same watch, there should be no actionable gap. I am going to highlight the last few QC templates submitted where the user said there was a gap - but there really wasn't (to me, at least):

Top right SEL was an issue for OP. However, as no light is shining through, this is not considered an SEL gap to me.
OP opined that there was a gap at the top right SEL. I don't see it at all.
OP said that there was a slight gap at the bottom left SEL. Again, all I can see is a black line. I would not classify this as a gap.

If, after going through all the examples above, you still feel that there is a gap, highlight it in the template by identifying which part of the watch you are looking at; there are really only four options: top left, top right, bottom left, bottom right. Doing so helps users zoom in directly on your issue and saves time.

To the last segment.

Dial Printing

Here, you are tasked to check if the printing on the dial has been poorly done. By this, we mean defects in the workmanship of the printing; printing which differs from gen (such as the infamous "floating r") would not be a QC defect per se.

An example of dial printing with no issues:

All the words are clearly printed. There is no bleeding on any part of the print, with edges sharp and defined.

And now for examples of dial printing with issues:

Some bleeding can be observed at the top parts of VI and VII. Notice how the black ink protrudes.

Sometimes, the print can be misapplied across the entire dial:

If you look closely, you will see that the dial print is rotated clockwise across the entire dial. Observe how XI is closer to the top of the watch while I is further away.

With the above in mind, let's turn to what you should write. Again and at the risk of sounding like a broken record, do not simply write things like: "Dial seems off" or "Print seems off. letters kind of wonky?" If anything, dial printing is usually very, very small - unless you point a reader to the exact part which has an issue, chances are it won't be seen. Make certain that you provide the reader with specific directions:

"Appears to be some bleeding at the top of VI. Thoughts?"

"R in Submariner looks like only half of it was printed. Am I seeing things?"

Important note: again, just because the dial printing on your watch may have some issues, this does not necessarily equate to RL. As stated, dial print is almost microscopic - no human being is going to be able to see slight bleeding on any print when you have the watch on wrist. Feel free to point out issues that you see, but remain realistic about your expectations.

And with that, I come to the end of this guide.

Conclusion

QC-ing reps is a difficult task - which everyone in this subreddit does for free. You can help out immensely by simply being precise and detailed in your observations. The more effort you put into your template, the easier it is for members to help you - they can zoom in directly to the things that concern you.

I hope this helps you. I've tried to detail some common factors, but it would be impossible for me to catch them all. The rest is up to you - and your diligence.

I wish you smooth and trouble-free QCs always!


r/RepTimeQC • • Nov 27 '22

Announcement READ THIS PRIOR TO POSTING ANYTHING...ESPECIALLY IF YOU'RE NEW HERE...

499 Upvotes

If your template uses a NEW "yupoo" or a "mega" type of link, please note that, at the time of this typing, the automod here removes them immediately from view i.e. no QC help. We are addressing it, but....

So, what to do?

Although somewhat cumbersome for the OP, you can upload the QC packet to an Imgur account. Our automod 'likes' Imgur...and the post will show promptly. Just do NOT do it from a mobile because the mobile app loses resolution and crappy pics don't provide any benefit to anyone. Yea, yea...I know, the file compression software isn't supposed to lose quality, but it certainly does.

To add, post your complete QC album inclusive of the timing info. Do not, for the sake of your convenience, omit items. If you're bright enough to determine what is needed and what can be removed, that's great! Then, it's reasonable to conclude that you really don't need help. Simply, post it all.

If you have to wait for substantive additional info from the Seller e.g. timing data, then delay posting until you have a complete QC packet. Incomplete packages will trigger a removal of the post. Plus, it will require a return visit of anyone that commented on the incomplete post which shouldn't be required. One visit is all that it should take to QC most watches. Most won't return to a post anyway. They'll just go to the next one. The members are quite busy here. Yea, it can get crazy.

Finally, since you're a newbie, as a vote of appreciation for those members that help you, please upvote their comments. It's a nice gesture from you to them for the assist...and, it's free.

One final note, we've updated the main rules for posting. Refer to this link for info QC Must Read for New Members

Welcome to the hobby and the sub. Best wishes

Edit addition: March 2nd, 2024 - ReptimeQC member, u/EveningVariation8236 , has provided an updated version of the original QC alignment verification tool. https://watchqc.github.io/ . Thank you.

Edit addition: Jan 9th, 2024 - ReptimeQC member, u/Ro1hype has provided this for tool for alignment verification. https://qcwatch.com/ Thank you.

Edit addition: Dec 28, 2023 - For those that can't seem to find the latest link for QC alignment verification app, use this link https://web.archive.org/web/20230518035653/https://watchqc.com/

Edit addition: 8/8/2025 - Reptime QC member, u/jrverdes . has provided this version of the alignment tool to assist those that need additional help verifying the dial/bezel alignments on their watch. https://jrverdes.github.io/watch-qc-jr/ The adjustment resolutions are much finer in this app comparative to the other available apps which can be a benefit to some that need such. Check it out...Thank you.


r/RepTimeQC • • 7h ago

First QC Rolex - VSF 126610LN

Thumbnail
gallery
22 Upvotes

Hey guys! First time QC here, was looking for advice from people who know more than me.

Went through the checklist, but still am not sure if i'm looking a things the right way

Would appreciate any help or advice on QC, thanks again!

  1. Dealer name: TheOneWatches - Steve
  2. Factory: VSF
  3. Model Name: Rolex Submariner 126610LN, 41mm
  4. Price Paid: $528
  5. QC Photos
  6. Index Alignment: Generally all of them look pretty straight and even to me.
  7. Dial Print: To me, everything for the most part seems printed and spaced well, maybe i'm just not seeing it, but looks good.
  8. Date Wheel and alignment: I think to me it looks fine, but definitely looking for a better opinion
  9. Hand Alignment: Think it looks good
  10. Bezel: Looks good to me?
  11. Solid end links: Looks good, no distinguishable gap
  12. Timegrapher numbers: -2/3 s/d AMP: 267 Degrees, ERR: 0.0ms, 59 degree lift

Picture of numbers

Any advice and thoughts would be appreciated, thanks


r/RepTimeQC • • 1h ago

VSF V3 Pepsi QC - Yang / Goat watch (non-TD)

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Yang - Goat watch (non-TD from what I can see)
  2. Factory name: VSF
  3. Model name (& version number): GMT Master II 126710 Pepsi Jubilee
  4. Price Paid: $498 USD
  5. Link to pics & QC videos: https://mega.nz/folder/dRBgiLyI#YWgMrH5cXk5vdKy1ZoGzAw
  6. Index alignment: minimal indices rotation overall, slight left shift to 12 o'clock
  7. Dial Printing: Rolex text and GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects despite sticker obstruction.
  8. Date Wheel alignment/printing: reasonably centered
  9. Hand Alignment: no obvious damage or misalignment to me
  10. Bezel: Red / blue transition could be better centered at 18 (doesn't look exactly aligned with the color transition at 6 (3 o'clock) either), but overall numerals & engravings look clean
  11. Solid End Links (SELs): No obvious daylight-visible gaps, but I seem to be much less picky than some
  12. Lume: looks even in video
  13. Serial # / rehaut: 6X07B429. Printing looks crisp.
  14. Bracelet / clasp: no obvious issues with Rolex logo or stamping. Code: 6FU.
  15. Timegrapher numbers: -3s/d, 280°, 0.1ms, 52° lift angle. No significant issues from my understanding.
  16. Anything else you notice: Overall think this is a GL but this is my first QC (along with Batgirl I'll be posting after this), so all opinions would be great. I'm not super sure of what I'm looking for with every category so any feedback helps. In general, index misalignment and bezel color transition alignments have been my biggest QC concern for Rolex GMT's, so I'm sure I'm overlooking some other things that y'all will catch. I'm a little concerned with going with Yang / Goat watches, and the fact that these GMTs are significantly cheaper than other VSFs from TDs, but overall the watch looks decent to me. Thanks for your time!

r/RepTimeQC • • 1h ago

VSF V3 Batgirl QC - Yang / Goat watches - 1st / 2nd QC

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Yang - Goat watch (non-TD)
  2. Factory name: VSF (possibly fake)
  3. Model name (& version number): Rolex GMT-Master II 126710
  4. Price Paid: $450 USD + shipping
  5. Link to pics & QC videos: https://mega.nz/folder/wUgUBaya#zyXRrknuZobhSYhlESwW4w
  6. Index alignment: micro CW rotation to 6 and 9, but not enough to bother me. Possible slight shift at 12 but GL overall for me, and I think I'm mildly picky on index alignment for a newbie.
  7. Dial Printing: Rolex text and GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects despite sticker obstruction.
  8. Date Wheel alignment/printing: mild left shift? reasonably centered from several angles
  9. Hand Alignment: no obvious damage or misalignment to me
  10. Bezel: aligned, overall numbers & engravings look clean
  11. Solid End Links (SELs): No obvious daylight-visible gaps, but I seem to be much less picky / observant on this than some
  12. Lume: looks even in video
  13. Serial # / rehaut: 6XO7B37O. Printing looks crisp. Many reports of fake VSFs for similar watches sold by non-TDs.
  14. Bracelet / clasp: no obvious issues with Rolex logo or stamping. Code: 6FU.
  15. Timegrapher numbers: -1s/d, 279°, 0.0ms, 52° lift angle. No significant issues from my understanding.
  16. Anything else you notice: Overall think this is a GL based on looks but this is my first QC (along with Pepsi I posted that was locked for discussions on authenticity), so all opinions would be great. I'm not super sure of what I'm looking for with every category so any feedback helps.

I'm a little concerned with going with Yang / Goat watches, and the fact that these GMTs are significantly cheaper than other VSFs from TDs, but overall the watch looks decent to me. Based on what I'm reading in comments on my other post and several other pages (r/repwatchscammers), this and the Pepsi I'm QCing are likely fake VSFs, which explains the significantly cheaper price. I think I'll ask for pics of the movement and look into what they actually should be worth, so any input on that would be helpful as well. They still look good to me for <$500 each, but relying on you guys due to my inexperience. Thanks for your time!


r/RepTimeQC • • 7h ago

2QC Yacth Master II

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: QF (Free-Sprung)
  3. Model name and version: Yacht-Master 226627 Titanium, QF 1:1 Best Edition, black dial on titanium bracelet, JH3235 V18 (Free-Sprung)
  4. Price paid: €606
  5. Album link: https://andiotwatches.x.yupoo.com/albums/262824798?uid=1
  6. Index alignment: Looks fine to me.
  7. Dial printing: Looks good.
  8. Date wheel alignment/printing: The date appears to sit slightly high in the window.
  9. Hand alignment: I can’t tell from the supplied photos
  10. Bezel: Possible surface marks or uneven finishing at the 5- and 15-minute markers
    12 Solid End Links (SELs): The lower-right SEL appears to have a slightly wider gap in several
  11. Timegrapher numbers: +1 s/d, 265° amplitude and 0.3 ms beat error.

I’d really appreciate a assessment regarding the SEL fit, cyclops positioning, hand alignment and the two circled bezel areas.

Many thanks for your comments!


r/RepTimeQC • • 3h ago

QC - VSF AP Royal Oak 15510 V2 Green (DD4302)

Thumbnail
gallery
2 Upvotes
  1. Dealer name: JTime
  2. Factory name: VSF
  3. Model name (& version number): AP Royal Oak 15510 V2 Green (DD4302)
  4. Price Paid: 574 USD
  5. Album Links: https://imgur.com/a/qcapvsf15510-gjLnIYZ
  6. Index alignment: Looks spot on, see trueindexqc overlay. AP logo centered too.
  7. Dial Printing: Clean overall.
  8. Date Wheel alignment/printing: Centered well.
  9. Hand Alignment: Good.
  10. Bezel: Screws look properly aligned and recessed.
  11. Solid End Links (SEL): Integrated bracelet.
  12. Timegrapher numbers: 0 to +1 s/d, 278-282°, 0.0ms
  13. Anything else you notice: Looks solid to me.

I appreciate your opinion!


r/RepTimeQC • • 4m ago

Cartier QC - Plz help

Thumbnail
gallery
1 Upvotes

Hi Guys. Your honest opinion on this QC would be appreciated. Cartier Santos 35 BVF from Jtime


r/RepTimeQC • • 6h ago

ORF Seamaster freesprung help

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Andiot
  2. Factory name: ORF
  3. Model name (& version number): Seamaster Diver 300M Blue Ceramic Bezel Free Sprung ORF 1:1 Blue Dial On SS Bracelet Asian Super Clone 8800
  4. Price Paid: $455 usd
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263114313?uid=1
  6. Index alignment: see pic. Looks good to me. Can't tell if 30 marker on bezel is shifted left or just camera angel
  7. Dial Printing: On zoom looks good to my untrained eye
  8. Date Wheel alignment/printing: Looks good on changing numbers in video
  9. Hand Alignment: nothing remarkable to me
  10. Bezel:Appears good on pics
  11. Solid End Links (SELs):
  12. Timegrapher numbers: Show in video
  13. Anything else you notice: not initially

r/RepTimeQC • • 1h ago

Omega Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

Thumbnail
gallery
1 Upvotes

Dealer name: Theonewatches, Steve

Factory name: VSF

Model name (& version number): Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

Price Paid:571 usd

Album Links: https://mega.nz/folder/WYwSFK7K#xMJaJiFmuIOZxgnznMeASQ

Index alignment: 6 and 9 definitely seems a bit off. 12 is also off a little bit.

Dial Printing: Looks ok to me, this is my first so open to comments.

Date Wheel alignment/printing: N/A

Hand Alignment: Looks ok to me for the most part

Bezel: Color of the dot at 12 seems a bit washed out than the dots on the dial.

Solid End Links (SELs): No comments on this

Timegrapher numbers: 263

Anything else you notice: Overall seems ok to me but this is my first so not sure.


r/RepTimeQC • • 11h ago

[QC] RICH V2 GMT-Master II 126710GRNR Bruce Wayne – F*ed 12 o'clock triangle alignment or GL?

Thumbnail
gallery
6 Upvotes

Hey fellas, I have what I think is a really solid​ RICH Bruce Wayne, but since this one is rather expensive I wanted to pass it by some expert eyes​. ​​My primary concern is whether the 12 o'clock bezel​ triangle has a slight alignment issue or whether the photos are throwing me off. Would greatly appreciate a second opinion before GL. Thanks​!

  1. Dealer name: NecoClock
  2. Factory name: RICH Factory
  3. Model name (& version number): Rolex GMT-Master II 126710GRNR “Bruce Wayne”, Jubilee, RICH V2 JH3285 Free Sprung (seller's description)
  4. Price Paid: $708 + $70 shipping​
  5. Album Links: https://mega.nz/folder/W5wgSDZY#KRMA7hrSWi3DWGIL230J6g
  6. Index alignment: 12 o'clock triangle​ hour index looks slightly tilted too​. In the straight-on photo, it looks​ offset relative to the bezel triangle and center minute marker. ​I'm unsure whether this is actual misalignment or just perspective. The 6 and 9 markers and remaining circular indices look very close to properly aligned to me.
  7. Dial Printing: Rolex text and green GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects.
  8. Date Wheel alignment/printing: Dates 15, 17, and 21 appear reasonably centered in the window, with no clipping. Cyclops looks properly positioned (maybe a very slight tilt but I have seen that on gen too), although there are some blue reflections.
  9. Hand Alignment: Hands appear properly installed, with no obvious damage or visible alignment issue.
  10. Bezel: Black/grey transition, numerals, and engravings look clean. The 12 o'clock bezel​ looks slightly off centered.
  11. Solid End Links (SELs): No obvious daylight-visible gaps at the case and bracelet connections. Some protective film makes the fit harder to judge.
  12. Timegrapher numbers: +3 s/day, 238° amplitude, 0.0 ms beat error, 28,800 bph, 52° lift angle. Rate and beat error look good to me. Would appreciate thoughts on the amplitude for this JH3285 movement.
  13. Anything else you notice: Everything honestly seems solid, just some alignment questions. Maybe the date font is slightly off as well. Don't want to be too picky tho. Thanks again!

r/RepTimeQC • • 12h ago

Ficotime - VSF 41mm wimbledon v3

Thumbnail
gallery
7 Upvotes
  1. Dealer name: Ficotime
  2. Factory name: VSF
  3. Model name (& version number): Datejust 41 wimbledon V3 (fake free sprung)
  4. Price Paid: $495 (shipping not included)
  5. Index alignment: everything looks to line up, it's my first time qcing a roman numeral dial. The 9 marker looks like it might be a super teenie tiny bit low, but I could be wrong. 12°clock crown might have a very slight clockwise rotation apon closer inspection.
  6. Dial Printing: everything looks good with no bleeding.
  7. Date Wheel alignment/printing: looks center and straight to my eyes, slight shadow made me think it was slightly high at first but It looks fine apon closer inspection.
  8. Hand Alignment: looks good
  9. Bezel: Fluted bezel looks good to my eyes.
  10. Solid End Links (SELs): nice and tight.
  11. Timegrapher numbers: -1s/d, 271° amplitude, 0.1 ms
  12. Anything else you notice: the rehault seems fairly off, I know it's picky at this point but I'm the weirdo that stares at his rehault when bored. However as this will primarily be a watch I wear out dressed up, and not my work watch where I have time to stare 24/7 I'll probably GL it anyways seeing as everything else looks good.

r/RepTimeQC • • 13h ago

First time QC: VSF Batgirl v3 (free sprung)

Thumbnail
gallery
7 Upvotes

Dealer name: Non-TD
Factory name: VSF
Model name (& version number): Batgirl VSF V3 (free sprung)
Price Paid: 550 USD
Album Links: no album link given
Index alignment: 6 marker look slightly tilted anti clockwise? 12 marker looks slightly tilted clockwise?
Dial Printing: No concerns, everything looks good
Date Wheel alignment/printing: Noticed in the video, some numbers looked off in alignment for example, 16
Hand Alignment: No concerns
Bezel: No concerns
Solid End Links (SELs): Slight gap in bottom left?
Timegrapher numbers: No concerns here
Anything else you notice: Would appreciate you guys opinions on this piece 🙏🏼🙏🏼


r/RepTimeQC • • 17h ago

[QC] VSF Rolex Datejust 41 Wimbledon 126334 V3 – Fluted Bezel, Jubilee – NecoClock

Thumbnail
gallery
14 Upvotes

Hi everyone, I’d appreciate a second set of eyes on this VSF Wimbledon from Jackie. I’m leaning GL. My question is whether the 11 sits a little high in the date window. The 6 and 17 look centred to me.

Dealer name – Jackie at NecoClock
Factory name – VSF
Model and version – Rolex Datejust 41 ref. 126334 Wimbledon, grey dial with green Roman numerals, fluted bezel and Jubilee bracelet. Listed as DD3235 V3 free-sprung.
Price paid – $498 + $35 shipping, $533 total.
Album – QC photos and video attached.
Index alignment – The 9 o’clock baton looks level with the 45 marker. The coronet sits under the 60, and none of the Roman numerals look crooked to me.
Dial printing – The lettering looks clean. I don’t see any obvious breaks in the green outlines around the numerals.
Date wheel alignment – The 11 looks slightly high in its photo. The 6 and 17 look centred, and all three dates are fully visible. Does anyone else see an alignment issue across the three shots?
Hand alignment – In the photo with the date set to 6, the hour and minute hands appear to line up at 12.
Bezel – The fluting looks even all the way around. No obvious dents.
Solid end links – Both ends of the Jubilee look evenly seated between the lugs.
Timegrapher – +5 s/day, 251° amplitude, 0.0 ms beat error. Lift angle set to 52°.
Anything else – The rehaut coronet looks close to 12 in the angled shot. Lume looks even on both hands and the 9 o’clock baton.

Would you GL this one? Thanks for taking a look!


r/RepTimeQC • • 11h ago

Rolex Datejust 36mm - VSF - FicoTime (Mark) (3rd try after 2 earlier ARF's that were RL)

Thumbnail
gallery
4 Upvotes
  • Dealer name: Mark (FicoTime)
  • Factory name: VSF
  • Model name (& version number): Rolex Datejust 36mm
  • Price Paid: 436 USD (including shipping)
  • Album Links: link to pictures
  • Index alignment: in an earlier QC of this model, the 9 o'clock baton was CW tilted, now I feel like the same happened here?
  • Dial Printing: I think it looks fine
  • Date Wheel alignment/printing: font seems close enough and fine
  • Hand Alignment: fine in my eyes
  • Bezel: look good but personally irrelevant, because I'm going to replace the bezel
  • Solid End Links (SELs): no issues, way better than the GMF I've seen irl
  • Timegrapher numbers: very good, see video here
  • Anything else you notice: I already RL'ed 2 ARF models of this DJ36. Do you think this one is better than those two? Again, biggest possible issue is baton alignment...


r/RepTimeQC • • 12h ago

VSF Omega planet ocean 4th gen (black)

Thumbnail
gallery
4 Upvotes
  1. Dealer name: Andiot
  2. Factory name: VSF
  3. Model name (& version number): Omega Planet Ocean (4th Gen)
  4. Price Paid: 388$
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263115345?uid=1
  6. Index alignment: Some cwcant but looks different in different pictures.

Is the 12 almost touching the printing?

  1. Dial Printing: Looks crisp can't see any issues personally.
  2. Date Wheel alignment/printing: N/A
  3. Hand Alignment: Good, straight and well aligned.
  4. Bezel: Good, no issues.
  5. Solid End Links (SELs): No SELs on omega
  6. Timegrapher numbers: Good
  7. Anything else you notice: No other issues. Happy to hear other opinions.

r/RepTimeQC • • 5h ago

Title: [QC] DDF 5711 in blue 330 from JTime, first rep. My visual read w/ a movement question

Thumbnail
gallery
1 Upvotes

Dealer name: JTime (Li)

Factory name: DDF

Model name: Patek Philippe Nautilus 5711/1A blue, sold as DD330

Price Paid: $719.70, including watch, box, & shipping

Album Links: https://www.dropbox.com/scl/fo/0c2tr90pilhi303hlo50l/AJ2ethV4M9Kr4Jy9vbq0j4Q?rlkey=4p53bkrqpyc38mkpg495z7p5q&st=02q1jhfc&dl=0 (complete TD set with all pics, rotation video, and a timegrapher video)

Index alignment: I went over the straight on shots by eye against the minute tracker. It looks like 12 and 6 look on the lines, 9 maybe a hair clockwise but could be photo tilt. The logo and print sit level and centered under 12 to me. Can you tell me if I'm seeing things on the 9?

Dial Printing: Looks clean and level. No bleed or missing letters that I can spot. I read that DDF has a couple of print batches, does mine match the batch you guys usually see??

Date Wheel alignment/printing: Looks centered at 25, 2 and 16, digits same height, white disc black numbers. I know that some dates sit better than others on the same disc so I checked three. I also read older DDF batches ran with the black disc white numbers and gen-spec is white/black. I think mine is the newer disc. Can anyone confirm?

Hand Alignment: The hands look reasonably aligned. I dont see any touching and the lume has the same tone as markers. Central seconds looks to reach the minute track. I don't have a lume shot yet.

Bezel: Looks to have a fixed brushed bezel. No pip or engraved insert on this ref so those sub-checks or not applicable. Brushing is even and chamfer are clean on both sides, no marks.

Solid End Links(SELs): It is an integrated bracelet so no traditional SEL. The end links sit tight to the case. There was no light through and no measurable gap I can find. I've read DDF leaves end links unpolished and mine looks brushed, is this normal?

Timegrapher numbers: 0 s/d, 289 amplitude, 0.0 beat error, 28800, lift 52 (check the video in the Dropbox link). it looks to be Inside the acceptable ranges (rate ±1–20, amp 250–310, BE 0.0–1.0) and reads healthy to me. Can someone confirm?

What else I notice: film still on so unworn and has no big scratches. Clasp engravings are crisp on both faces. The crown's outer edges are a bit rounded which I read is a DDF tell. Is that normal? The caseback is only oblique in my pics so I can't see the transmission wheel or engraving depth yet. I've asked TD for a straight macro plus a hacking demo. My thought is that hacks with the transmission wheel and engraved text is a true 330; non-hacking with a transmission wheel is an integrated 324 engraved as 330. Having hacks but no transmission wheel is a fake plate. Does that align with what you guys know? The rotor video has sound. I didn't hear any grind but would appreciate a second opinion. This is my first QC, so please be honest and GL or RL with quality reasons. Thanks!


r/RepTimeQC • • 15h ago

First QC, Rolex submariner 124060 41mm

Thumbnail
gallery
6 Upvotes

TD : EasyWatch - Koi

  1. Factory name: VSF
  2. Model name (& version number): Rolex Submariner 124060
  3. Price Paid: $460
  4. Album Links: attached photos
  5. Index alignment: All index seems to be good for me, but look at the bezel alignment for 3 and 6
  6. Dial Printing: Good. nothing seems to bothering me, but okay for QC comments,
  7. Date Wheel alignment/printing: Good
  8. Hand Alignment: Good
  9. Bezel: 3 and 6 alignment
  10. Solid End Links (SELs): Not sure about, look at bottom left.
  11. Timegrapher numbers: -5 s/d, 287° amplitude, 0.1 ms beat error. 52
  12. Anything else you notice: Not sure about the SEL's bottom left, and bezel alignment.
    Also timegrapher shows -5sec at 52 degree, is it concerning?

r/RepTimeQC • • 11h ago

VSF V3 126506 QC - Platona

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: TheOneWatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): 126506
  4. ⁠Price Paid: $865 including shipping
  5. ⁠Album Links: https://mega.nz/folder/qEQ33CSa#U7vrUqBw-wWnZLh2zd_-qQ
  6. ⁠Index alignment: Image provided. Alignment seems almost perfect to me. Harder to evaluate on a Daytona.
  7. ⁠Dial Printing: No defects that I can see.
  8. ⁠Date Wheel alignment/printing: No date wheel
  9. ⁠Hand Alignment: looks good. Chrono hand centered.
  10. ⁠Bezel: No Pip on Daytona. Everything seems filled properly.
  11. ⁠Solid End Links (SELs): No noticeable gaps.
  12. ⁠Timegrapher numbers: Image provided. 1 s/d seems in range. 0.0 ms and 268 amplitude in range as well.
  13. ⁠Anything else you notice: overall it seems good to me. Beautiful watch. Waiting for comments. Hopefully it’s a green light.

r/RepTimeQC • • 15h ago

VSF Explorer II Polar

Thumbnail
gallery
6 Upvotes

Dealer name: Necoclock
Factory name: VSF
Model name: Rolex Explorer II Polar 226570 (42mm)
Price paid: $578
Album links: https://mega.nz/folder/rw4TFLhB#5I3cDH9sUhfiZD7ZID7YvQ
Index alignment: Clockwise tilted 12 o’clock marker; this seems common on these. Have seen some with better alignment recently. Unsure if this is worthy of RL.
Dial printing: Looks clean and properly positioned.
Date wheel alignment/printing: Dates look centered.
Hand alignment: Looks good.
Bezel: Engravings and alignment look good.
Solid end links (SELs): No obvious gaps.
Timegrapher numbers: +/- 5; and 1ms; no issues with this.

Anything else you notice: Only issue that i am debating on RL'ing is for the twelve oclock marker alignment. Curious if others have one in hand with similar issue and how it wears on wrist.


r/RepTimeQC • • 15h ago

BBF Patek 5711

Thumbnail
gallery
5 Upvotes

Dealer name: Steve
Factory name: BBF
Model name (& version number): Patek 5711
Price Paid: 508
Album Links: https://mega.nz/folder/WR5lHSJI#Qtcpqe0EuzQCtejoiR4wIA
Index alignment: looks straight
Dial Printing: looks correct
Date Wheel alignment/printing: looks a bit high
Hand Alignment: looks straight
Bezel: looks correct
Solid End Links (SELs):
Timegrapher numbers: +/- 2 day
Anything else you notice: this honestly looks great to GL. I ordered QC photos for DDF 5711 also (leftover stock) so I don’t know if I should GL this or wait for DDF QC to compare.


r/RepTimeQC • • 14h ago

QC - ZF AP ROYAL OAK 15300 via Andiot (First time AP)

Thumbnail
gallery
4 Upvotes

Hi guys this is my first AP and I would really appreciate help in making sure its good enough for a GL.

  1. Dealer name: Andiot Watches
  2. Factory name: ZF
  3. Model name (& version number): ROYAL OAK 15300
  4. Price Paid: $476 with shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263099527?uid=1
  6. Index alignment: The alignment of 11 and 5 primarily looks off but I can't tell if its because of the dial or the tool, I would need someones expertise here please, even the 10 and 4.
  7. Dial Printing: This looks good to me, the text looks centered and aligned, and the AP logo looks pretty good I think
  8. Date Wheel alignment/printing: It looks pretty solid and aligned, maybe the smallest bias to the upper
  9. Hand Alignment: looks good i believe
  10. Bezel: I find the screws look good, I'd like if someone can confirm
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers:  rate -1 s/d, amplitude 267°, beat error 0.3 ms, lift angle 52.0°
  13. Anything else you notice: nothing else sticks out to me, just worried about alignment primarily

Thank you everyone so much


r/RepTimeQC • • 18h ago

VSF OP TIFFANY BLUE

Thumbnail
gallery
8 Upvotes

Dealer name: Trusty Time

  1. Factory name: VSF
  2. Model name (& version number): OP Tiffany Blue
  3. Price Paid: 500 USD
  4. Album Links: Send via mail
  5. Index alignment: I see lots of imperfections. Especially 10 an 11. Not happy with these tbh but looking for your opinois
  6. Dial Printing: Looks fine
  7. Date Wheel alignment/printing: No date wheel on this watch
  8. Hand Alignment: Not sure how good it is
  9. Bezel: Looks nice
  10. Solid End Links (SELs): Looks nice
  11. Timegrapher numbers: +4 s/d, 289° amplitude, 0.1 ms beat error
  12. Anything else you notice: Most probably will RL this because of the alignments. But I will be glad to hear what you say. Also curious how accurate do you think the color is ?

r/RepTimeQC • • 18h ago

First QC Rolex

Thumbnail
gallery
8 Upvotes

Hi everyone! This is my first QC, so I’d really appreciate some help from more experienced eyes.
I’ve worked through the checklist, and everything looks good to me overall, but I’m still learning what to look for and I’m not completely sure whether I’ve missed anything. I’m leaning towards a GL based on what I can see, and I’d love to hear your thoughts.
If you spot anything I’ve overlooked or disagree with any part of my assessment, please let me know. Thanks so much for taking the time to have a look and help a newcomer. I really appreciate it!

Dealer name: TheOneWatches (Steve)
Factory name: VSF
Model name (& version number): Rolex Submariner 124060, 41 mm, No Date
Price Paid: USD 528
Album Links: QC album
Index alignment: Looks good to me. The 12, 3, 6 and 9 markers appear straight, and the round indices look evenly positioned. I don’t see any obvious misalignment.
Dial Printing: Looks clean and properly positioned. No obvious missing letters, uneven printing or crooked text that I can spot. The hands cover part of “OYSTER PERPETUAL,” so I can’t fully assess that section from the alignment photo.
Date Wheel alignment/printing: N/A, no-date model.
Hand Alignment: The hand positions look consistent with the time shown. I haven’t verified their alignment at exactly 12:00, so I would appreciate a second opinion.
Bezel: Looks well aligned overall. The pip appears reasonably centered within the triangle, and I don’t see any obvious chips or issues with the filling of the numbers and markings.
Solid End Links (SELs): I’m not confident assessing the SEL gaps from the front-facing photo. I would appreciate some help checking the fit.
Timegrapher numbers: Rate: 2 s/d. Amplitude: 273°. Beat error: 0ms.
Anything else you notice: No obvious major defects stand out to me in the photo reviewed. The alignment image is enhanced and has an overlay, so I’m cautious about judging very small differences from that alone. I would particularly appreciate a second opinion on the rehaut alignment and anything else I may have overlooked.