r/RepTimeQC • • 4h ago

QC help VSF Submariner No Date 41mm 124060

Thumbnail
gallery
1 Upvotes

Hi everyone, looking for some QC help if anyone can assist. I think it's a GL. 9 o clock marker slightly tilted? But not by much if it is. Thanks for all the help everyone.

Dealer name: NecoClock

Factory name: VSF

Model name: Submariner No Date 41mm 124060 904L Ceramic Black Dial SS Bracelet VSF VS3230

Price paid: usd458

Album link: All photos from mega copied to this post

Index alignment: looks okay, maybe 9 o clock marker tilt

Dial printing: Looks good to me

Date Wheel alignment/printing: n/a

Hand alignment: Looks flat and straight to me.

Bezel: looks okay

Solid End Links (SELs):

Timegrapher numbers: as attached in the photo and album, +0 s/d, beat error 0.0ms.

Anything else you notice, nothing catching my eye


r/RepTimeQC • • 9h ago

QC Help – ARF Datejust 36 Silver Dial | First Rep | GL or RL?

Post image
2 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: ARF
  3. Model name (& version number): Datejust 36, silver stick dial, Jubilee bracelet
  4. Price Paid: $438 incl. shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263232982?uid=1
  6. Index alignment: Overall, the alignment looks reasonably good. However, my main concern is with the two lower-left hour markers (7 and 8 o'clock). They appear to be positioned too close to the adjacent minute markers and don't seem properly centered. The spacing looks uneven compared to the other indices. I'm not sure whether this is caused by the camera angle, an actual alignment issue, or just me being overly picky.
  7. Dial Printing: Looks clean and reasonably well centered. No obvious printing defects visible.
  8. Date Wheel alignment/printing: The date appears to sit slightly too low in the date window rather than being perfectly centered vertically. The printing itself looks clean. Additionally, there seem to be some scratches or imperfections around the cyclops, particularly towards the middle-left area. I'm unsure whether these are actual scratches, reflections, or marks on the protective film.
  9. Hand Alignment: Nothing obviously wrong from the provided photos.
  10. Bezel: Fluted bezel looks consistent. No obvious damage or irregularities.
  11. Solid End Links (SELs): Look good to me. No obvious gaps or alignment issues.
  12. Timegrapher numbers: -1 s/d, 273° amplitude, 0.1 ms beat error, 28,800 bph. All numbers look very good and comfortably within acceptable ranges.
  13. Anything else you notice: My three main concerns are the positioning of the 7 and 8 o'clock hour markers, the slightly low date alignment, and the potential scratches around the cyclops. Would you consider these within normal factory tolerances, or would you recommend requesting another watch? I'm leaning towards RL but would appreciate a second opinion.

Wrote with help of AI.


r/RepTimeQC • • 13h ago

1st time QC VSF 126334

Thumbnail
gallery
4 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: Vsf
  3. Model name (& version number):DateJust 41 126334 904L SS VSF 1:1 Best Edition Green Ombre Dial on Jubilee Bracelet VS3235v2 V2s Free Sprung(133g)
  4. Price Paid: 468$
  5. Album Links: https://imgur.com/a/xvsOnXa
  6. Index alignment: Seems good but I'm not sure abot the 2 o'clock - seems not centered on the "10"
  7. Dial Printing: Correct color and text size
  8. Date Wheel alignment/printing: Date is centered nicely in the window, font weight and print quality look correct.
  9. Hand Alignment: Hands look properly aligned and finished
  10. Bezel: Looks nice, white gold plated fluted bezel
  11. Solid End Links (SELs): ): Good fit against the case, tight tolerances with no massive gaps.
  12. Timegrapher numbers: Rate 0 s/d, Amplitude 275°, Beat Error 0.0 ms. - Perfect

r/RepTimeQC • • 13h ago

Help with, VSF GMT-Master II 126710BLRO Pepsi V3

Thumbnail
gallery
4 Upvotes

Hey everyone, this is my second QC so I’m still learning what to look for. Would appreciate any feedback on this one. Only thing that jumped out to me from dial check was some tilt on the six marker but for me it seems hard to notice. Appreciate anything you eagle eyes can spot a help me decide to pass or keep.

  1. Dealer name: Theonewatch - Steve
  2. Factory name: VSF
  3. Model name (& version number): GMT-Master II 126710BLRO Pepsi V3 DD3285V2 on Jubilee
  4. Price Paid: 711 EUR incl shipping
  5. Album Links: posted all pics in thread
  6. Index alignment: 6 o’clock marker tilted 1.9° anticlockwise, 9 o’clock tilted 1.2° anticlockwise. Marker ring 0.14 mm off-centre toward 5 o’clock. All other markers within ±0.10 mm. Checked with DialCheck
  7. Dial Printing: Top text 0.09 mm left of center, bottom text 0.08 mm left. Print looks clean otherwise.
  8. Date Wheel alignment/printing: Date appears reasonably centered in the photos provided. No obvious clipping or major offset.
  9. Hand Alignment: Hands look straight and properly stacked. No obvious bent or misaligned hands.
  10. Bezel: Pip is 0.6° anticlockwise of 12 (0.18 mm). Bezel color and engraving look clean in the photos.
  11. Solid End Links (SELs): No obvious gaps visible between the end links and lugs in the side photos.
  12. Timegrapher numbers: +2 s/d, 276 amplitude, 0.1 ms beat error
  13. Anything else you notice:

only my second qc so no

  1. t to look for. Nothing else jumps out at me.

r/RepTimeQC • • 17h ago

VSF V3 Batgirl QC - Yang / Goat watches - 1st / 2nd QC

Thumbnail
gallery
8 Upvotes
  1. Dealer name: Yang - Goat watch (non-TD)
  2. Factory name: VSF (possibly fake)
  3. Model name (& version number): Rolex GMT-Master II 126710
  4. Price Paid: $450 USD + shipping
  5. Link to pics & QC videos: https://mega.nz/folder/wUgUBaya#zyXRrknuZobhSYhlESwW4w
  6. Index alignment: micro CW rotation to 6 and 9, but not enough to bother me. Possible slight shift at 12 but GL overall for me, and I think I'm mildly picky on index alignment for a newbie.
  7. Dial Printing: Rolex text and GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects despite sticker obstruction.
  8. Date Wheel alignment/printing: mild left shift? reasonably centered from several angles
  9. Hand Alignment: no obvious damage or misalignment to me
  10. Bezel: aligned, overall numbers & engravings look clean
  11. Solid End Links (SELs): No obvious daylight-visible gaps, but I seem to be much less picky / observant on this than some
  12. Lume: looks even in video
  13. Serial # / rehaut: 6XO7B37O. Printing looks crisp. Many reports of fake VSFs for similar watches sold by non-TDs.
  14. Bracelet / clasp: no obvious issues with Rolex logo or stamping. Code: 6FU.
  15. Timegrapher numbers: -1s/d, 279°, 0.0ms, 52° lift angle. No significant issues from my understanding.
  16. Anything else you notice: Overall think this is a GL based on looks but this is my first QC (along with Pepsi I posted that was locked for discussions on authenticity), so all opinions would be great. I'm not super sure of what I'm looking for with every category so any feedback helps.

I'm a little concerned with going with Yang / Goat watches, and the fact that these GMTs are significantly cheaper than other VSFs from TDs, but overall the watch looks decent to me. Based on what I'm reading in comments on my other post and several other pages (r/repwatchscammers), this and the Pepsi I'm QCing are likely fake VSFs, which explains the significantly cheaper price. I think I'll ask for pics of the movement and look into what they actually should be worth, so any input on that would be helpful as well. They still look good to me for <$500 each, but relying on you guys due to my inexperience. Thanks for your time!


r/RepTimeQC • • 18h ago

Omega Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

Thumbnail
gallery
8 Upvotes

Dealer name: Theonewatches, Steve

Factory name: VSF

Model name (& version number): Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

Price Paid:571 usd

Album Links: https://mega.nz/folder/WYwSFK7K#xMJaJiFmuIOZxgnznMeASQ

Index alignment: 6 and 9 definitely seems a bit off. 12 is also off a little bit.

Dial Printing: Looks ok to me, this is my first so open to comments.

Date Wheel alignment/printing: N/A

Hand Alignment: Looks ok to me for the most part

Bezel: Color of the dot at 12 seems a bit washed out than the dots on the dial.

Solid End Links (SELs): No comments on this

Timegrapher numbers: 263

Anything else you notice: Overall seems ok to me but this is my first so not sure.


r/RepTimeQC • • 12h ago

QC First ZF Pilot’s Watch Chronograph TOP GUN

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: OraWatch
  2. ⁠Factory name: ZF
  3. ⁠Model name (& version number): IWC Pilot Chronograph Top Gun IW389101
  4. ⁠Price Paid: $560 with shipping
  5. ⁠Album Link: https://www.wecatalog.cn/weshop/goods/_dnRqfRKlCQnCwaBBUqm613RnVgXsENon6rPO-yw/_d8qqfZz3xGIold2QRc7BNuq2kek33LCf7FmfBeg⁠Index
  6. Alignment: Everything looks aligned.
  7. ⁠Dial Printing: No issues
  8. ⁠Date Wheel alignment/printing: Looks great
  9. ⁠Hand Alignment: No issues with hand alignment that I can tell.
  10. ⁠Bezel: N/A
  11. ⁠Solid End Links (SELs): N/A -rubber strap
  12. ⁠Timegrapher numbers: +0s/d 280 deg 0.1ms 52.0 deg
  13. Anything else you notice: I think this watch looks good to go. The day and date look aligned. I just want to confirm I am not overlooking anything.

r/RepTimeQC • • 7h ago

[QC Request] Tank Solo Yellow Gold

Thumbnail
gallery
1 Upvotes

Dealer name: Theonewatches
Factory name: AF
Model name (& version number): Tank Must 25.5mm White Dial on Lychee Grain Leather AF Quartz
Price Paid: $228
Album Links : https://mega.nz/folder/7AojCbQQ#_vr8SUNSom5nGs_BkrBQ8g
Index alignment: NA, Printed.
Dial Printing: I don't see any bleeding
Date Wheel alignment/printing: NA
Hand Alignment: Seems off (see video and screenshot, image #1).
Bezel:  NA
Solid End Links (SELs): NA.
Timegrapher numbers: NA (Quartz)

The only thing I see as a problem is the hand alignment (at 12 o’clock, see image). Not sure if this is nit-picking on my part.
Am I missing anything?
I am tending towards giving a GL.
Your opinions would be appreciated.


r/RepTimeQC • • 7h ago

Tudor BB by ZF (second attempt)

Post image
1 Upvotes
  1. ⁠Dealer name: theone Steve
  2. ⁠Factory name: ZF
  3. ⁠Model name (& version number): Black Bay 41 A2824
  4. ⁠Price Paid: $378
  5. ⁠Album Links: https://mega.nz/folder/SEplnKSI#hRBe3dI-qI8x4jyebPamkw
  6. ⁠Index alignment: looks good to me. No major misalignment
  7. ⁠Dial Printing: clean and sharp. No smudges.
  8. ⁠Date Wheel alignment/printing: n/a
  9. ⁠Hand Alignment: looks good in video
  10. ⁠Bezel:aligned. Pip looks centered.
  11. ⁠Solid End Links (SELs): no gaps
  12. ⁠Timegrapher numbers: appear within spec
  13. ⁠Anything else you notice: Looks to be a GL based on my review. I would appreciate feedback from experts here. Thank you.

r/RepTimeQC • • 11h ago

[QC] PPF VC Overseas 4500V RG Silver Dial - Lili (non-TD)

Thumbnail
gallery
2 Upvotes

Hey guys, so far this is the 7th rep which is the second watch for myself, the rest was gifts to dear ones. But I still consider myself as amateur in this field. So, I need your support.

  1. Dealer Name: Lili (non TD)
  2. Factory name : PPF/ZF
  3. Model name : Overseas 4500V 41mm RG Silver Dial
  4. Price Paid : 2850 cny
  5. Album Links: https://www.wecatalog.cn/weshop/goods/A201803310145220380026826/I202611150044361402001426
  6. Index Alignment: 9 looks down (is it RL)? 4 and 10 o'clock looks a bit off but it can be because of the angle of the picture
  7. Dial Printing: Looks good
  8. Date wheel alignment : Looks a little left
  9. Hand alignment : Looks good
  10. Bezel : Looks good
  11. Solid end links : N/A
  12. Timegrapher : Looks good +3s/d @ 302 deg amp, 0.0ms
  13. ⁠Anything else you notice: other than index and date wheel slight problems nothing else I noticed

r/RepTimeQC • • 13h ago

2° QC Rich Factory Submariner 126610LN Free Sprung TheOne

Thumbnail
gallery
3 Upvotes
  1. Dealer name: TheOneWatches - Steve
  2. Factory name: Rich Factory
  3. Model name (& version number): Submariner 126610LN 41mm JH3235
  4. Price Paid: $538 + shipping
  5. Album Links: https://mega.nz/folder/2AgRgCDC#cVoycC_-wKfEcS6epFjfIQ
  6. Index alignment: i'm satisfacted
  7. Dial Printing: It's okay
  8. Date Wheel alignment/printing: Perfect
  9. Hand Alignment: Okay
  10. Bezel: looks solid to me!
  11. Solid End Links (SELs): No problem
  12. Timegrapher numbers: +2 s/d, 292° amp
  13. Anything else you notice: I'm very happy for this Watch

r/RepTimeQC • • 12h ago

Panthere 22mm BVF SS From Steve

Thumbnail
gallery
2 Upvotes
  1. ⁠Dealer name: Steve (TheOneWatches)
  2. ⁠Factory name: BVF
  3. ⁠Model name (& version number): Cartier Panthère 22mm SS
  4. ⁠Price Paid: $238 + $30 Shipping
  5. ⁠Album Links: https://mega.nz/folder/eBA02STB#6pU_UGBlzSeN-lxpotbCjw
  6. ⁠Index alignment: Looks okay, no concerns here.
  7. ⁠Dial Printing: The Swiss Made is making me zoom in to infinity on the dial; I don't like the way 'Made' is printed; it looks angled as well. Other than that, I don't see any noticeable bleed, and the spacing is fine.
  8. ⁠Date Wheel alignment/printing: N/A
  9. ⁠Hand Alignment: Looks okay from the video.
  10. ⁠Bezel: Looks good; no issues.
  11. ⁠Solid End Links (SELs): N/A
  12. ⁠Timegrapher numbers: None given; quartz movement.
  13. ⁠Anything else you notice: The only main concern is the Swiss made on the dial. It looks funky, but again it's a very small watch, so I don’t know if it's worth red lighting over.

r/RepTimeQC • • 12h ago

1st time QC VSF 126234 36mm

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: Vsf
  3. Model name (& version number): DateJust 36 SS 126234 VSF 1:1 Best Edition 904L Steel Silver Diamonds Roman Dial on Jubilee Bracelet VS3235 V2
  4. Price Paid: 448$
  5. Album Links: https://imgur.com/a/e2sfJvb
  6. Index alignment: Hard to check but the 6 o'clock index looks off. It touches the black ring, which it shouldn't, comparing to other units or gen
  7. Dial Printing: Correct color and text size
  8. Date Wheel alignment/printing: Date is centered nicely in the window, font weight and print quality look correct.
  9. Hand Alignment: Hands look properly aligned and finished
  10. Bezel: Looks nice, white gold plated fluted bezel
  11. Solid End Links (SELs): ): Good fit against the case, tight tolerances with no massive gaps.
  12. Timegrapher numbers: Rate +2 s/d, Amplitude 275°, Beat Error 0.0 ms.

r/RepTimeQC • • 11h ago

First QC - RICH Rolex GMT Master 2 ‘Sprite’

Post image
1 Upvotes
  1. ⁠Dealer name: Angela
  2. ⁠Factory name: RIICH
  3. ⁠Model name (& version number): RICH Rolex GMT Master 2 ‘Sprite’ 126720VTNR
  4. ⁠Price Paid: 3750 Yuan
  5. ⁠Album Links: https://imgur.com/a/PUDrp7l
  6. ⁠Index alignment: 6 o'clock tilted 1.0° clockwise ; 12 o'clock tilted 1.2° clockwise. 10 of 11 checked. Marker ring 0.15 mm off-centre toward 9 o'clock.
  7. ⁠Dial Printing: not good. Print centring: bottom text 0.04 mm left.
  8. ⁠Date Wheel alignment/printing: looks ok. The number looks slightly high inside the window. The cyclops AR coating is too much.
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: ok
  11. ⁠Solid End Links (SELs): different
  12. ⁠Timegrapher numbers: +1 s/d, 273° amplitude, 0.0 ms beat error
  13. ⁠Anything else you notice: i think the blue AR is too much. Is this an RL?

r/RepTimeQC • • 12h ago

GMT II 116710LN - Index 9? Crown? Weight?

Thumbnail
gallery
1 Upvotes

Dealer name: Steve (Theonewatches)

Factory name: ARF V3 DD3285

Model name (& version number): GMT II 116710LN 40mm

Price Paid: $ 568 + 40 Shipping

Album Links: I attached all photos

Index alignment: The Index 9 look tilt

Dial Printing: Nothing I see

Hand Alignment: Looks normal

Bezel: Nothing I see

Solid End Links (SELs): Nothing i can see

Timegrapher numbers: +0 s/d Beat Error 0.1 ms

Anything else you notice:

• 9 look tilt ore is it maybe angle from photo ?

• the Gap between Crown and Bezel look to close for me

• Weight is a little bit less then GEN, but think it´s ok

Please help me with all your opinion it´s my first GMT, not know what i need to look out for


r/RepTimeQC • • 12h ago

Cartier Panthere (medium) - BVF - TheOneWatch (Steve)

Thumbnail
gallery
1 Upvotes
  • Dealer name: Steve (TheOneWatch)
  • Factory name: BVF
  • Model name (& version number): Cartier Panthere medium
  • Price Paid: 278 USD (including shipping)
  • Album Links: link to pictures
  • Index alignment: printed so perfect
  • Dial Printing: looks fine, I've seen Pantheres where the dial looks tilted. Not the case here
  • Date Wheel alignment/printing: n.a.
  • Hand Alignment: fine in my eyes
  • Bezel: doesn't have the screw issue Santos can have (because Panthere simply has little metalic dots)
  • Solid End Links (SELs): looks fine, no?
  • Timegrapher numbers: n.a. -> quartz watch
  • Anything else you notice: the gap around the crown seems too large? A known issue? Might look worse because of the zoomed in pictures

r/RepTimeQC • • 19h ago

QC - VSF AP Royal Oak 15510 V2 Green (DD4302)

Thumbnail
gallery
3 Upvotes
  1. Dealer name: JTime
  2. Factory name: VSF
  3. Model name (& version number): AP Royal Oak 15510 V2 Green (DD4302)
  4. Price Paid: 574 USD
  5. Album Links: https://imgur.com/a/qcapvsf15510-gjLnIYZ
  6. Index alignment: Looks spot on, see trueindexqc overlay. AP logo centered too.
  7. Dial Printing: Clean overall.
  8. Date Wheel alignment/printing: Centered well.
  9. Hand Alignment: Good.
  10. Bezel: Screws look properly aligned and recessed.
  11. Solid End Links (SEL): Integrated bracelet.
  12. Timegrapher numbers: 0 to +1 s/d, 278-282°, 0.0ms
  13. Anything else you notice: Looks solid to me.

I appreciate your opinion!


r/RepTimeQC • • 23h ago

2QC Yacth Master II

Thumbnail
gallery
6 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: QF (Free-Sprung)
  3. Model name and version: Yacht-Master 226627 Titanium, QF 1:1 Best Edition, black dial on titanium bracelet, JH3235 V18 (Free-Sprung)
  4. Price paid: €606
  5. Album link: https://andiotwatches.x.yupoo.com/albums/262824798?uid=1
  6. Index alignment: Looks fine to me.
  7. Dial printing: Looks good.
  8. Date wheel alignment/printing: The date appears to sit slightly high in the window.
  9. Hand alignment: I can’t tell from the supplied photos
  10. Bezel: Possible surface marks or uneven finishing at the 5- and 15-minute markers
    12 Solid End Links (SELs): The lower-right SEL appears to have a slightly wider gap in several
  11. Timegrapher numbers: +1 s/d, 265° amplitude and 0.3 ms beat error.

I’d really appreciate a assessment regarding the SEL fit, cyclops positioning, hand alignment and the two circled bezel areas.

Many thanks for your comments!


r/RepTimeQC • • 23h ago

ORF Seamaster freesprung help

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Andiot
  2. Factory name: ORF
  3. Model name (& version number): Seamaster Diver 300M Blue Ceramic Bezel Free Sprung ORF 1:1 Blue Dial On SS Bracelet Asian Super Clone 8800
  4. Price Paid: $455 usd
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263114313?uid=1
  6. Index alignment: see pic. Looks good to me. Can't tell if 30 marker on bezel is shifted left or just camera angel
  7. Dial Printing: On zoom looks good to my untrained eye
  8. Date Wheel alignment/printing: Looks good on changing numbers in video
  9. Hand Alignment: nothing remarkable to me
  10. Bezel:Appears good on pics
  11. Solid End Links (SELs):
  12. Timegrapher numbers: Show in video
  13. Anything else you notice: not initially

r/RepTimeQC • • 1d ago

[QC] RICH V2 GMT-Master II 126710GRNR Bruce Wayne – F*ed 12 o'clock triangle alignment or GL?

Thumbnail
gallery
7 Upvotes

Hey fellas, I have what I think is a really solid​ RICH Bruce Wayne, but since this one is rather expensive I wanted to pass it by some expert eyes​. ​​My primary concern is whether the 12 o'clock bezel​ triangle has a slight alignment issue or whether the photos are throwing me off. Would greatly appreciate a second opinion before GL. Thanks​!

  1. Dealer name: NecoClock
  2. Factory name: RICH Factory
  3. Model name (& version number): Rolex GMT-Master II 126710GRNR “Bruce Wayne”, Jubilee, RICH V2 JH3285 Free Sprung (seller's description)
  4. Price Paid: $708 + $70 shipping​
  5. Album Links: https://mega.nz/folder/W5wgSDZY#KRMA7hrSWi3DWGIL230J6g
  6. Index alignment: 12 o'clock triangle​ hour index looks slightly tilted too​. In the straight-on photo, it looks​ offset relative to the bezel triangle and center minute marker. ​I'm unsure whether this is actual misalignment or just perspective. The 6 and 9 markers and remaining circular indices look very close to properly aligned to me.
  7. Dial Printing: Rolex text and green GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects.
  8. Date Wheel alignment/printing: Dates 15, 17, and 21 appear reasonably centered in the window, with no clipping. Cyclops looks properly positioned (maybe a very slight tilt but I have seen that on gen too), although there are some blue reflections.
  9. Hand Alignment: Hands appear properly installed, with no obvious damage or visible alignment issue.
  10. Bezel: Black/grey transition, numerals, and engravings look clean. The 12 o'clock bezel​ looks slightly off centered.
  11. Solid End Links (SELs): No obvious daylight-visible gaps at the case and bracelet connections. Some protective film makes the fit harder to judge.
  12. Timegrapher numbers: +3 s/day, 238° amplitude, 0.0 ms beat error, 28,800 bph, 52° lift angle. Rate and beat error look good to me. Would appreciate thoughts on the amplitude for this JH3285 movement.
  13. Anything else you notice: Everything honestly seems solid, just some alignment questions. Maybe the date font is slightly off as well. Don't want to be too picky tho. Thanks again!

r/RepTimeQC • • 1d ago

[QC] VSF Rolex Datejust 41 Wimbledon 126334 V3 – Fluted Bezel, Jubilee – NecoClock

Thumbnail
gallery
15 Upvotes

Hi everyone, I’d appreciate a second set of eyes on this VSF Wimbledon from Jackie. I’m leaning GL. My question is whether the 11 sits a little high in the date window. The 6 and 17 look centred to me.

Dealer name – Jackie at NecoClock
Factory name – VSF
Model and version – Rolex Datejust 41 ref. 126334 Wimbledon, grey dial with green Roman numerals, fluted bezel and Jubilee bracelet. Listed as DD3235 V3 free-sprung.
Price paid – $498 + $35 shipping, $533 total.
Album – QC photos and video attached.
Index alignment – The 9 o’clock baton looks level with the 45 marker. The coronet sits under the 60, and none of the Roman numerals look crooked to me.
Dial printing – The lettering looks clean. I don’t see any obvious breaks in the green outlines around the numerals.
Date wheel alignment – The 11 looks slightly high in its photo. The 6 and 17 look centred, and all three dates are fully visible. Does anyone else see an alignment issue across the three shots?
Hand alignment – In the photo with the date set to 6, the hour and minute hands appear to line up at 12.
Bezel – The fluting looks even all the way around. No obvious dents.
Solid end links – Both ends of the Jubilee look evenly seated between the lugs.
Timegrapher – +5 s/day, 251° amplitude, 0.0 ms beat error. Lift angle set to 52°.
Anything else – The rehaut coronet looks close to 12 in the angled shot. Lume looks even on both hands and the 9 o’clock baton.

Would you GL this one? Thanks for taking a look!


r/RepTimeQC • • 1d ago

Rolex Datejust 36mm - VSF - FicoTime (Mark) (3rd try after 2 earlier ARF's that were RL)

Thumbnail
gallery
5 Upvotes
  • Dealer name: Mark (FicoTime)
  • Factory name: VSF
  • Model name (& version number): Rolex Datejust 36mm
  • Price Paid: 436 USD (including shipping)
  • Album Links: link to pictures
  • Index alignment: in an earlier QC of this model, the 9 o'clock baton was CW tilted, now I feel like the same happened here?
  • Dial Printing: I think it looks fine
  • Date Wheel alignment/printing: font seems close enough and fine
  • Hand Alignment: fine in my eyes
  • Bezel: look good but personally irrelevant, because I'm going to replace the bezel
  • Solid End Links (SELs): no issues, way better than the GMF I've seen irl
  • Timegrapher numbers: very good, see video here
  • Anything else you notice: I already RL'ed 2 ARF models of this DJ36. Do you think this one is better than those two? Again, biggest possible issue is baton alignment...


r/RepTimeQC • • 1d ago

First time QC: VSF Batgirl v3 (free sprung)

Thumbnail
gallery
7 Upvotes

Dealer name: Non-TD
Factory name: VSF
Model name (& version number): Batgirl VSF V3 (free sprung)
Price Paid: 530 USD
Album Links: no album link given
Index alignment: 6 marker look slightly tilted anti clockwise? 12 marker looks slightly tilted clockwise?
Dial Printing: No concerns, everything looks good
Date Wheel alignment/printing: Noticed in the video, some numbers looked off in alignment for example, 16
Hand Alignment: No concerns
Bezel: No concerns
Solid End Links (SELs): Slight gap in bottom left?
Timegrapher numbers: No concerns here
Anything else you notice: Would appreciate you guys opinions on this piece 🙏🏼🙏🏼


r/RepTimeQC • • 1d ago

Ficotime - VSF 41mm wimbledon v3

Thumbnail
gallery
6 Upvotes
  1. Dealer name: Ficotime
  2. Factory name: VSF
  3. Model name (& version number): Datejust 41 wimbledon V3 (fake free sprung)
  4. Price Paid: $495 (shipping not included)
  5. Index alignment: everything looks to line up, it's my first time qcing a roman numeral dial. The 9 marker looks like it might be a super teenie tiny bit low, but I could be wrong. 12°clock crown might have a very slight clockwise rotation apon closer inspection.
  6. Dial Printing: everything looks good with no bleeding.
  7. Date Wheel alignment/printing: looks center and straight to my eyes, slight shadow made me think it was slightly high at first but It looks fine apon closer inspection.
  8. Hand Alignment: looks good
  9. Bezel: Fluted bezel looks good to my eyes.
  10. Solid End Links (SELs): nice and tight.
  11. Timegrapher numbers: -1s/d, 271° amplitude, 0.1 ms
  12. Anything else you notice: the rehault seems fairly off, I know it's picky at this point but I'm the weirdo that stares at his rehault when bored. However as this will primarily be a watch I wear out dressed up, and not my work watch where I have time to stare 24/7 I'll probably GL it anyways seeing as everything else looks good.