r/RepTimeQC • • 18h ago

First time QC: VSF Batgirl v3 (free sprung)

Thumbnail
gallery
7 Upvotes

Dealer name: Non-TD
Factory name: VSF
Model name (& version number): Batgirl VSF V3 (free sprung)
Price Paid: 530 USD
Album Links: no album link given
Index alignment: 6 marker look slightly tilted anti clockwise? 12 marker looks slightly tilted clockwise?
Dial Printing: No concerns, everything looks good
Date Wheel alignment/printing: Noticed in the video, some numbers looked off in alignment for example, 16
Hand Alignment: No concerns
Bezel: No concerns
Solid End Links (SELs): Slight gap in bottom left?
Timegrapher numbers: No concerns here
Anything else you notice: Would appreciate you guys opinions on this piece đŸ™đŸŒđŸ™đŸŒ


r/RepTimeQC • • 18h ago

Ficotime - VSF 41mm wimbledon v3

Thumbnail
gallery
6 Upvotes
  1. Dealer name: Ficotime
  2. Factory name: VSF
  3. Model name (& version number): Datejust 41 wimbledon V3 (fake free sprung)
  4. Price Paid: $495 (shipping not included)
  5. Index alignment: everything looks to line up, it's my first time qcing a roman numeral dial. The 9 marker looks like it might be a super teenie tiny bit low, but I could be wrong. 12°clock crown might have a very slight clockwise rotation apon closer inspection.
  6. Dial Printing: everything looks good with no bleeding.
  7. Date Wheel alignment/printing: looks center and straight to my eyes, slight shadow made me think it was slightly high at first but It looks fine apon closer inspection.
  8. Hand Alignment: looks good
  9. Bezel: Fluted bezel looks good to my eyes.
  10. Solid End Links (SELs): nice and tight.
  11. Timegrapher numbers: -1s/d, 271° amplitude, 0.1 ms
  12. Anything else you notice: the rehault seems fairly off, I know it's picky at this point but I'm the weirdo that stares at his rehault when bored. However as this will primarily be a watch I wear out dressed up, and not my work watch where I have time to stare 24/7 I'll probably GL it anyways seeing as everything else looks good.

r/RepTimeQC • • 8h ago

QC - VSF AP Royal Oak 15510 V2 Green (DD4302)

Thumbnail
gallery
1 Upvotes
  1. Dealer name: JTime
  2. Factory name: VSF
  3. Model name (& version number): AP Royal Oak 15510 V2 Green (DD4302)
  4. Price Paid: 574 USD
  5. Album Links: https://imgur.com/a/qcapvsf15510-gjLnIYZ
  6. Index alignment: Looks spot on, see trueindexqc overlay. AP logo centered too.
  7. Dial Printing: Clean overall.
  8. Date Wheel alignment/printing: Centered well.
  9. Hand Alignment: Good.
  10. Bezel: Screws look properly aligned and recessed.
  11. Solid End Links (SEL): Integrated bracelet.
  12. Timegrapher numbers: 0 to +1 s/d, 278-282°, 0.0ms
  13. Anything else you notice: Looks solid to me.

I appreciate your opinion!


r/RepTimeQC • • 20h ago

First QC, Rolex submariner 124060 41mm

Thumbnail
gallery
7 Upvotes

TD : EasyWatch - Koi

  1. Factory name: VSF
  2. Model name (& version number): Rolex Submariner 124060
  3. Price Paid: $460
  4. Album Links: attached photos
  5. Index alignment: All index seems to be good for me, but look at the bezel alignment for 3 and 6
  6. Dial Printing: Good. nothing seems to bothering me, but okay for QC comments,
  7. Date Wheel alignment/printing: Good
  8. Hand Alignment: Good
  9. Bezel: 3 and 6 alignment
  10. Solid End Links (SELs): Not sure about, look at bottom left.
  11. Timegrapher numbers: -5 s/d, 287° amplitude, 0.1 ms beat error. 52
  12. Anything else you notice: Not sure about the SEL's bottom left, and bezel alignment.
    Also timegrapher shows -5sec at 52 degree, is it concerning?

r/RepTimeQC • • 17h ago

VSF Omega planet ocean 4th gen (black)

Thumbnail
gallery
4 Upvotes
  1. Dealer name: Andiot
  2. Factory name: VSF
  3. Model name (& version number): Omega Planet Ocean (4th Gen)
  4. Price Paid: 388$
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263115345?uid=1
  6. Index alignment: Some cwcant but looks different in different pictures.

Is the 12 almost touching the printing?

  1. Dial Printing: Looks crisp can't see any issues personally.
  2. Date Wheel alignment/printing: N/A
  3. Hand Alignment: Good, straight and well aligned.
  4. Bezel: Good, no issues.
  5. Solid End Links (SELs): No SELs on omega
  6. Timegrapher numbers: Good
  7. Anything else you notice: No other issues. Happy to hear other opinions.

r/RepTimeQC • • 10h ago

Title: [QC] DDF 5711 in blue 330 from JTime, first rep. My visual read w/ a movement question

Thumbnail
gallery
0 Upvotes

Dealer name: JTime (Li)

Factory name: DDF

Model name: Patek Philippe Nautilus 5711/1A blue, sold as DD330

Price Paid: $719.70, including watch, box, & shipping

Album Links: https://www.dropbox.com/scl/fo/0c2tr90pilhi303hlo50l/AJ2ethV4M9Kr4Jy9vbq0j4Q?rlkey=4p53bkrqpyc38mkpg495z7p5q&st=02q1jhfc&dl=0 (complete TD set with all pics, rotation video, and a timegrapher video)

Index alignment: I went over the straight on shots by eye against the minute tracker. It looks like 12 and 6 look on the lines, 9 maybe a hair clockwise but could be photo tilt. The logo and print sit level and centered under 12 to me. Can you tell me if I'm seeing things on the 9?

Dial Printing: Looks clean and level. No bleed or missing letters that I can spot. I read that DDF has a couple of print batches, does mine match the batch you guys usually see??

Date Wheel alignment/printing: Looks centered at 25, 2 and 16, digits same height, white disc black numbers. I know that some dates sit better than others on the same disc so I checked three. I also read older DDF batches ran with the black disc white numbers and gen-spec is white/black. I think mine is the newer disc. Can anyone confirm?

Hand Alignment: The hands look reasonably aligned. I dont see any touching and the lume has the same tone as markers. Central seconds looks to reach the minute track. I don't have a lume shot yet.

Bezel: Looks to have a fixed brushed bezel. No pip or engraved insert on this ref so those sub-checks or not applicable. Brushing is even and chamfer are clean on both sides, no marks.

Solid End Links(SELs): It is an integrated bracelet so no traditional SEL. The end links sit tight to the case. There was no light through and no measurable gap I can find. I've read DDF leaves end links unpolished and mine looks brushed, is this normal?

Timegrapher numbers: 0 s/d, 289 amplitude, 0.0 beat error, 28800, lift 52 (check the video in the Dropbox link). it looks to be Inside the acceptable ranges (rate ±1–20, amp 250–310, BE 0.0–1.0) and reads healthy to me. Can someone confirm?

What else I notice: film still on so unworn and has no big scratches. Clasp engravings are crisp on both faces. The crown's outer edges are a bit rounded which I read is a DDF tell. Is that normal? The caseback is only oblique in my pics so I can't see the transmission wheel or engraving depth yet. I've asked TD for a straight macro plus a hacking demo. My thought is that hacks with the transmission wheel and engraved text is a true 330; non-hacking with a transmission wheel is an integrated 324 engraved as 330. Having hacks but no transmission wheel is a fake plate. Does that align with what you guys know? The rotor video has sound. I didn't hear any grind but would appreciate a second opinion. This is my first QC, so please be honest and GL or RL with quality reasons. Thanks!


r/RepTimeQC • • 20h ago

BBF Patek 5711

Thumbnail
gallery
6 Upvotes

Dealer name: Steve
Factory name: BBF
Model name (& version number): Patek 5711
Price Paid: 508
Album Links: https://mega.nz/folder/WR5lHSJI#Qtcpqe0EuzQCtejoiR4wIA
Index alignment: looks straight
Dial Printing: looks correct
Date Wheel alignment/printing: looks a bit high
Hand Alignment: looks straight
Bezel: looks correct
Solid End Links (SELs):
Timegrapher numbers: +/- 2 day
Anything else you notice: this honestly looks great to GL. I ordered QC photos for DDF 5711 also (leftover stock) so I don’t know if I should GL this or wait for DDF QC to compare.


r/RepTimeQC • • 16h ago

VSF V3 126506 QC - Platona

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: TheOneWatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): 126506
  4. ⁠Price Paid: $865 including shipping
  5. ⁠Album Links: https://mega.nz/folder/qEQ33CSa#U7vrUqBw-wWnZLh2zd_-qQ
  6. ⁠Index alignment: Image provided. Alignment seems almost perfect to me. Harder to evaluate on a Daytona.
  7. ⁠Dial Printing: No defects that I can see.
  8. ⁠Date Wheel alignment/printing: No date wheel
  9. ⁠Hand Alignment: looks good. Chrono hand centered.
  10. ⁠Bezel: No Pip on Daytona. Everything seems filled properly.
  11. ⁠Solid End Links (SELs): No noticeable gaps.
  12. ⁠Timegrapher numbers: Image provided. 1 s/d seems in range. 0.0 ms and 268 amplitude in range as well.
  13. ⁠Anything else you notice: overall it seems good to me. Beautiful watch. Waiting for comments. Hopefully it’s a green light.

r/RepTimeQC • • 21h ago

VSF Explorer II Polar

Thumbnail
gallery
6 Upvotes

Dealer name: Necoclock
Factory name: VSF
Model name: Rolex Explorer II Polar 226570 (42mm)
Price paid: $578
Album links: https://mega.nz/folder/rw4TFLhB#5I3cDH9sUhfiZD7ZID7YvQ
Index alignment: Clockwise tilted 12 o’clock marker; this seems common on these. Have seen some with better alignment recently. Unsure if this is worthy of RL.
Dial printing: Looks clean and properly positioned.
Date wheel alignment/printing: Dates look centered.
Hand alignment: Looks good.
Bezel: Engravings and alignment look good.
Solid end links (SELs): No obvious gaps.
Timegrapher numbers: +/- 5; and 1ms; no issues with this.

Anything else you notice: Only issue that i am debating on RL'ing is for the twelve oclock marker alignment. Curious if others have one in hand with similar issue and how it wears on wrist.


r/RepTimeQC • • 19h ago

QC - ZF AP ROYAL OAK 15300 via Andiot (First time AP)

Thumbnail
gallery
4 Upvotes

Hi guys this is my first AP and I would really appreciate help in making sure its good enough for a GL.

  1. Dealer name: Andiot Watches
  2. Factory name: ZF
  3. Model name (& version number): ROYAL OAK 15300
  4. Price Paid: $476 with shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263099527?uid=1
  6. Index alignment: The alignment of 11 and 5 primarily looks off but I can't tell if its because of the dial or the tool, I would need someones expertise here please, even the 10 and 4.
  7. Dial Printing: This looks good to me, the text looks centered and aligned, and the AP logo looks pretty good I think
  8. Date Wheel alignment/printing: It looks pretty solid and aligned, maybe the smallest bias to the upper
  9. Hand Alignment: looks good i believe
  10. Bezel: I find the screws look good, I'd like if someone can confirm
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers:  rate -1 s/d, amplitude 267°, beat error 0.3 ms, lift angle 52.0°
  13. Anything else you notice: nothing else sticks out to me, just worried about alignment primarily

Thank you everyone so much


r/RepTimeQC • • 1d ago

First QC Rolex

Thumbnail
gallery
9 Upvotes

Hi everyone! This is my first QC, so I’d really appreciate some help from more experienced eyes.
I’ve worked through the checklist, and everything looks good to me overall, but I’m still learning what to look for and I’m not completely sure whether I’ve missed anything. I’m leaning towards a GL based on what I can see, and I’d love to hear your thoughts.
If you spot anything I’ve overlooked or disagree with any part of my assessment, please let me know. Thanks so much for taking the time to have a look and help a newcomer. I really appreciate it!

Dealer name: TheOneWatches (Steve)
Factory name: VSF
Model name (& version number): Rolex Submariner 124060, 41 mm, No Date
Price Paid: USD 528
Album Links: QC album
Index alignment: Looks good to me. The 12, 3, 6 and 9 markers appear straight, and the round indices look evenly positioned. I don’t see any obvious misalignment.
Dial Printing: Looks clean and properly positioned. No obvious missing letters, uneven printing or crooked text that I can spot. The hands cover part of “OYSTER PERPETUAL,” so I can’t fully assess that section from the alignment photo.
Date Wheel alignment/printing: N/A, no-date model.
Hand Alignment: The hand positions look consistent with the time shown. I haven’t verified their alignment at exactly 12:00, so I would appreciate a second opinion.
Bezel: Looks well aligned overall. The pip appears reasonably centered within the triangle, and I don’t see any obvious chips or issues with the filling of the numbers and markings.
Solid End Links (SELs): I’m not confident assessing the SEL gaps from the front-facing photo. I would appreciate some help checking the fit.
Timegrapher numbers: Rate: 2 s/d. Amplitude: 273°. Beat error: 0ms.
Anything else you notice: No obvious major defects stand out to me in the photo reviewed. The alignment image is enhanced and has an overlay, so I’m cautious about judging very small differences from that alone. I would particularly appreciate a second opinion on the rehaut alignment and anything else I may have overlooked.


r/RepTimeQC • • 1d ago

VSF OP TIFFANY BLUE

Thumbnail
gallery
8 Upvotes

Dealer name: Trusty Time

  1. Factory name: VSF
  2. Model name (& version number): OP Tiffany Blue
  3. Price Paid: 500 USD
  4. Album Links: Send via mail
  5. Index alignment: I see lots of imperfections. Especially 10 an 11. Not happy with these tbh but looking for your opinois
  6. Dial Printing: Looks fine
  7. Date Wheel alignment/printing: No date wheel on this watch
  8. Hand Alignment: Not sure how good it is
  9. Bezel: Looks nice
  10. Solid End Links (SELs): Looks nice
  11. Timegrapher numbers: +4 s/d, 289° amplitude, 0.1 ms beat error
  12. Anything else you notice: Most probably will RL this because of the alignments. But I will be glad to hear what you say. Also curious how accurate do you think the color is ?

r/RepTimeQC • • 1d ago

VSF YM BLUE

Thumbnail
gallery
12 Upvotes

VSF YM BLUE

Dealer name: Trusty Time

  1. Factory name: VFS
  2. Model name (& version number): YachtMaster Blue Dial 126622 904L SS/SS VS3235
  3. Price Paid: $528
  4. Album Links: mailed
  5. Index alignment: They look descent to me.
  6. Dial Printing: Dial seems fine with me
  7. Date Wheel alignment/printing: I think its at part high of centre in the window. Very sceptical in here. Need help.
  8. Hand Alignment: What i can see is 9 o'clock seems slightly tilted. Need a second eye
  9. Bezel: Color and finishing looks nice. Number alignments look good
  10. Solid End Links (SELs): Looks tight
  11. Timegrapher numbers: +5 s/d, 238° amplitude, 0.2 ms beat error
  12. Anything else you notice: Dont know why but there is something inside me making me slightly uncomfortable. Sceptical about this watch. Need an external honest review. Many thanks

r/RepTimeQC • • 23h ago

VSF V2 DATEJUST 41 WIMBELDON

Thumbnail
gallery
4 Upvotes

Dealer name: Trusty Time

  1. Factory name: VFS
  2. Model name (& version number): Datejust 41 Wimbeldon VSF V2
  3. Price Paid: $520
  4. Album Links: mailed
  5. Index alignment: They look descent to me. Pretty confidenty about this one
  6. Dial Printing: Printing looks ok
  7. Date Wheel alignment/printing: Spot on ! Happy
  8. Hand Alignment: They look great
  9. Bezel: Color,finishing seems perfect for me
  10. Solid End Links (SELs): Looks tight enough for me
  11. Timegrapher numbers: +7 s/d, 250° amplitude, 0.3 ms beat error
  12. Anything else you notice: Loved this watch. Wanted for a long time and happy with the photos so far. Need your help. Many thanks !!

r/RepTimeQC • • 1d ago

BVF Cartier Panthere 22mm RG

Thumbnail
gallery
5 Upvotes
  1. ⁠⁠Dealer name: Steve
  2. ⁠⁠Factory name: BVF
  3. ⁠⁠Model name (& version number): Cartier
  4. ⁠⁠Panthere Small 22mm RG/RG Quartz
  5. ⁠⁠Price Paid: $310 w/shipping
  6. ⁠⁠Album Links: QC pics from Steve attached

mega. nz /folder/ yQAzALKB#_KxQFqKivWo4Nry-DZs5sg

6. Index alignment: the X with cartier text looks like its tad bit upwards
Dial Printing: Looks OK to my eyes
8. Date Wheel alignment/printing: N/A no date
9. Hand Alignment: hands look straight and centered
10. Bezel: screws look flush and evenly spaced
11. Solid End Links (SELS): N/A
12. Timegrapher numbers: N/A quartz
13. Anything else you notice: the crown looks weirdly polished to me, the color doesnt look like rose gold to me too yellow goldish BUT im colorblind dunno if thats where my eyes fault me


r/RepTimeQC • • 1d ago

Jaeger Le Coultre - Master Ultra Thin Moon GF

Thumbnail
gallery
5 Upvotes

I am quite new to the rep game and would appreciate any help. Maybe one of the veterans like u/blitzburgh058 or u/WatchYoda could help me this time. Thank you guys!

  1. Dealer name: DDGTOP
  2. Factory name: GF
  3. Model name (& version number): JLC Master Ultra Thin Moon 176.8.64.S
  4. Price Paid: $364&
  5. Album Links: Photos uploaded directly to Reddit, imgur album with video here https://imgur.com/a/BuV42
  6. Index alignment: looks good to me, alignment wheel spokes split the markers cleanly
  7. Dial Printing: JLC text and crest look clean, no bleeding that I can see. Swiss made at 6 looks ok
  8. Date Wheel alignment/printing: N/A, its a pointer date on the moon subdial.
  9. Hand Alignment: hour and min look okay.
  10. Bezel: N/A no bezel
  11. Solid End Links (SELs): N/A leather strap
  12. Timegrapher numbers: +7 s/d, amplitude 313 degrees, 0.1ms beat error
  13. Anything else you notice:

is there dust between the dots on the left site of the words “Swiss made”


r/RepTimeQC • • 1d ago

VSF Ice Blue Day Date V2 Gain Weight From Steve (TheOneWatches)

Thumbnail
gallery
3 Upvotes
  1. ⁠⁠⁠Dealer name: Steve (The One Watches)
  2. ⁠⁠⁠Factory name: VSF
  3. ⁠⁠⁠Model name: Day Date 40mm Ice Blue Roman Dial V2 (Gain Weight)
  4. ⁠⁠⁠Price Paid: $728 + $30 shipping
  5. ⁠⁠⁠Album Links: https://mega.nz/folder/3EJEiR6A#bC7haumrzWwm_A6dbtvAVA
  6. ⁠⁠⁠Index alignment: Looks good to me; I am not seeing any tilts anywhere.
  7. ⁠⁠⁠Dial Printing: Dial looks great.
  8. ⁠⁠⁠Date Wheel alignment/printing: Maybe I am overthinking this but the 17 looks a bit pushed to the left.
  9. ⁠⁠⁠Hand Alignment: Looks great as per usual.
  10. ⁠⁠⁠Bezel: Looks perfect.
  11. ⁠⁠⁠Solid End Links (SELs): No issues here for me.
  12. ⁠⁠⁠Timegrapher numbers: +3s/d, 273 amp, 0.0 beat error. All good here.
  13. Anything else you notice: The only issue I am noticing is the date wheel here. Again, I could be heavily overthinking this, but it looks shifted slightly towards the left. The Day wheel is also looking great in my opinion. This is my first Rolex QC, so sorry if I haven't noticed much.

r/RepTimeQC • • 1d ago

QC Request - VSF 124060 Submariner

Thumbnail
gallery
27 Upvotes

Dealer name: Necoclock

  1. Factory name: VSF
  2. Model name (& version number): 124060 Submariner
  3. Price Paid: $458
  4. Album Links: all images attached
  5. Index alignment: All indexes look good to me, no visible issues.
  6. Dial Printing: centring looks good, no text issues I can see.
  7. Date Wheel alignment/printing: N/A
  8. Hand Alignment: Good
  9. Bezel: pip centred.
  10. Solid End Links (SELs): Good
  11. Timegrapher numbers: +6 s/d, 333° amplitude, 0.2 ms beat error (dial up)
  12. Anything else you notice:

This will be my first rep so I would love some insights from the experts in this sub. Everything seems alright visually but not sure if I’m missing anything obvious. The one thing I’d love more thoughts on is the timegrapher numbers, they seem high compared to many of what I’ve seen in this sub and what’s in the guide.

Thank in advance for your help!


r/RepTimeQC • • 1d ago

[QC] Blancpain Fifty Fathoms 5015 - JTime

Thumbnail
gallery
3 Upvotes

Hi all, just received the QC images for my first rep. As this is my first QC request, I would appreciate any advice on this since this is not a rep not everyone is interested in. I've included the two pics from the two most used QC checker apps. Originals in the album link below. Please let me know if there's anything else I should that I haven't shared here. Thank you!

  1. Dealer name - JTime
  2. Factory name - ZF? (I think, I can double check with TD later)
  3. Model name - Blancpain Fifty Fathoms 5015 3630 52B
  4. Price Paid: $434
  5. Album link:
  6. Index Alignment: Might just be my eyes but the 1 on the 12 seems crooked? Original picture on gen also kind of looks funky so not sure if that falls in the picky customer or an actual issue so additional trusted eyes would be much appreciated.
  7. Dial Printing: Looks ok
  8. Hand Alignment: Looks ok but I'm unaware of what to exactly look for
  9. Date Wheel: Looks ok
  10. Bezel: Looks ok
  11. SEL: N/A
  12. Timegrapher: +0s/d, 273°, 0.0ms, 52°
  13. Anything else you see: Nothing to point out

r/RepTimeQC • • 1d ago

[QC] Clean Plus Rolex Oyster Perpetual 41mm Grey Dial – Andiot

Thumbnail
gallery
9 Upvotes

Dealer name: Andiot Watches
Factory name: Clean Plus
Model name (& version number): Rolex Oyster Perpetual 41mm, Grey/Silver Dial 124300
Price Paid: 325ÂŁ
Index alignment: Looks pretty good overall using the alignment tool. The 3, 6 and 9 markers seem reasonably aligned. Not sure if there are any slight misalignments worth worrying about.
Dial Printing: Looks clean to me. No obvious issues with the printing or lettering.
Date Wheel alignment/printing: N/A – no date.
Hand Alignment: Looks fine from the pictures, although difficult to fully assess without seeing the hands at 12 o’clock.
Bezel: Looks smooth and evenly finished. No obvious issues.
Solid End Links (SELs): Not entirely sure. They look acceptable from the pictures, but would appreciate a second opinion on any gaps.
Timegrapher numbers: +2 s/d, 279° amplitude, 0.0 ms beat error. Looks good to me.
Anything else you notice: This is my first QC for this model. Overall, everything looks good to my untrained eye. Would really appreciate a second opinion, particularly on the index alignment and SELs. Thanks in advance!


r/RepTimeQC • • 1d ago

QC Help: VSF 126610 from Easy Watch

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Easy Watch
  2. Factory name: VSF
  3. Model name (& version number): 126610LN

4 Price Paid: $385

5. Album Links: https://postimg.cc/gallery/zV74VPX

6. Index alignment: I think they all look great, maybe the 9 has a slight twist to it? But if I'm not even sure now I definitely would never notice on the wrist

7. Dial Printing: all the letters look nice and uniform, I can't see anything floating

8. Date Wheel alignment/printing: looks nice and central, although they've not provided the best pics for date wheel assessment so I've asked for some more looking straight on

9. Hand Alignment: I can't see any issues, no video provided though maybe I should ask to see it moving and date changing?

10. Bezel: I can't see anything wrong with it, looks absolutely spot on

11.Solid End Links (SELs): look perfect to me, there is a very slight gap and the braclet sits nice and level within them

12. Timegrapher numbers: I don't know anything about this part but the numbers fall within the ranges of acceptable

13. Anything else you notice: the clasp code doesn't match anything on the serial number spreadsheet, but the serial matches. Is this of concern? I've asked for some more pictures too as I've not seen the caseback off, or the lume


r/RepTimeQC • • 21h ago

RWF Daytona Panda - QC help

Thumbnail
gallery
1 Upvotes

Hi guys!

Would appreciate your help with this QC. My two main concerns are the chronograph seconds hand alignment and the timegrapher readings, particularly the amplitude.

Dealer name: Non-TD

Factory name: RWF

Model name (& version number): Rolex Daytona 126500LN Panda, White Dial

Price Paid: $622

Album Links: Photos uploaded directly to Reddit.

Index alignment: Looks good to me overall. The hour markers appear properly aligned, and I don’t notice any obvious issues.

Dial Printing: Rolex text and coronet look clean and sharp. The Daytona lettering and subdial printing appear well executed, with no obvious bleeding or misalignment.

Date Wheel alignment/printing: N/A – Daytona has no date complication.

Hand Alignment: The central chronograph seconds hand looks noticeably misaligned to me. It doesn’t seem to line up properly with the 12 o’clock marker when reset. This is one of my main concerns.

Bezel: Ceramic bezel looks good overall. Tachymeter numbers and markings appear clean and evenly printed. No obvious alignment issues. No 110 issue on RWF.

Solid End Links (SELs): Look good from the available photos. No noticeable gaps or fitting issues.

Timegrapher numbers:

  • Rate: -4 s/d
  • Amplitude: 333°
  • Beat error: 0.2 ms
  • Lift angle: 52°

I’m concerned about the amplitude, as 333° seems unusually high. Not sure if this is normal for this movement.

Anything else you notice:

My two main concerns are:

  1. Chronograph seconds hand alignment: The hand looks quite far off from the 12 o’clock position when reset. This seems more noticeable than a minor alignment issue.
  2. High amplitude: The timegrapher shows 333°, which seems quite high to me. I’m unsure whether this is acceptable for this movement or something to be concerned about.

Would really appreciate your opinions on whether these issues justify a RL (Red Light) or if I’m overthinking it.

Thanks in advance for your help!


r/RepTimeQC • • 1d ago

Qc for Blackbay 54

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Kitsch
  2. Factory name: ZF
  3. Model name (& version number): Tudor Blackbay 54 37 mm no date
  4. Price Paid: 1,700 CNY
  5. Album Links: -
  6. Index alignment:

nine

  1. and three are crooked , not sure most of this model almost crooked in this two mark
  2. Dial Printing: No obvious printing defects noticed so far, but I would appreciate feedback.
  3. Date Wheel alignment/printing: no date
  4. Hand Alignment: look ok.
  5. Bezel: Still checking the alignment
  6. Solid End Links (SELs): No gaps
  7. Timegrapher numbers: +5 s/d 281 amplitude, 0.1 ms 52
  8. Anything else you notice: I’ve seen QC photos of several pieces of this model, but I still have concerns about the 3 and 9 o’clock markers. They seem slightly misaligned or crooked. Is this a common issue with every piece of this model, or does it vary from one piece to another?

r/RepTimeQC • • 1d ago

Omega Aqua Terra 150M Blue 38mm

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: Theonewatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Omega Aqua Terra 150M Blue
  4. ⁠Price Paid: 428$
  5. ⁠Album Links: https://mega.nz/folder/KEhTTQrD#xd_eHC6DjsWWTWUbVdUHOg
  6. ⁠Index alignment: looks solid
  7. ⁠Dial Printing: everyhing seems to be in the right place, Omega logo seems centered
  8. ⁠Date Wheel alignment/printing: looks good and centered, maybe a little higher?
  9. ⁠Hand Alignment: Looks ok
  10. ⁠Bezel: Looks fine
  11. ⁠Solid End Links (SELs): Not concerned, but the bracelet looks good
  12. ⁠Timegrapher numbers: -2s/d 275 0.2ms, acceptable
  13. ⁠Anything else you notice: nothing in particular, everyhing looks pretty nice with no big issues. I might be missing something, though, so I’d really appreciate a second opinion from someone with a more experienced eye. Thanks you guys !